Euroventilatori supplier in Romania
For Euroventilatori we quote low, medium and high pressure centrifugal fans of the AP, APR, EU, MPR and BP series, EVC and EVF axial fans and special versions; the item is determined by airflow, pressure and air temperature.
Founded in 1981 · Headquarters: San Pietro Mussolino (VI), Italy
Who is Euroventilatori and what does it make?
Euroventilatori is an Italian manufacturer of industrial fans, based in San Pietro Mussolino, in the province of Vicenza, active since 1981. The range covers low-pressure axial fans, low, medium and high pressure centrifugal fans, motors, special versions and accessories. Impeller diameters start at 160 and reach 1600 mm, and outside the series fans of up to 2000 mm are made, including double-inlet, special-blade or two-stage versions.
The high-pressure centrifugal fans of the AP, APC, APR, APR-N8, APRC and APRD series are used in pneumatic conveying, cement plants, foundries, burners and the chemical and metallurgical industry. The medium-pressure series, for example EU, EUM, EUK, MPR, TF, TH, TPA and TTRC, draw air heavily laden with dust, chips, sawdust or fibres. On several belt-driven series, for example APC, EUC or TRC, the fluid temperature reaches 90 °C without a cooling fan and up to 350 °C with a thermal protection fan on the shaft.
The low-pressure fans BP, BPC, BPR, BPRC and BPRDC serve ventilation, air conditioning, drying and the extraction of smoke or gases, and BT is a roof extraction tower. The EVC, EVF, EVL, EVP and EVT axial series cover air extraction in paint booths, halls, cooling towers and roofs. For a quotation the airflow, pressure, temperature and nature of the air handled matter.
What do we supply from the Euroventilatori range?
| Product | Description |
|---|---|
| High-pressure centrifugal: AP, APR, APRD | AP is direct-coupled for air heavily laden with dust, APR has a backward-curved blade impeller for high efficiency, and APRD is two-stage for small and medium flows at very high pressures. |
| Medium-pressure centrifugal: EU, EUM, MPR, TF, TTRC | The series draw air with dust, granules, sawdust or fibres. TPALC has special blades for wool and rags, and TTRC is the robust version with an open impeller, for wood chips and paper waste. |
| Low-pressure centrifugal: BP, BPR, BPRDC, BT | For ventilation, air conditioning, drying and extraction. BPRDC has a double inlet for large air volumes, and BT is a roof extraction tower with a fibreglass cap. |
| Low-pressure axial: EVC, EVF, EVL, EVP, EVT | EVC is suited to paint booths, EVF and EVL have a drum with double flange, EVP with a single flange, and EVT is a propeller roof fan. The versions work between −20 and +60 or +70 °C, depending on the series. |
Why Euroventilatori?
- Separate series for clean air, or air with dust, chips or fibres — the impeller is matched to the material conveyed
- Direct drive or belt drive — the choice depends on the temperature and the speed required
- Up to 350 °C on some of the belt-driven series, with a protection fan — they can be used for hot process air
- Diameters from 160 to 1600 mm and special versions up to 2000 mm — from a local extractor to a large installation
- Axial series for paint booths, with spark-proof impeller and motor outside the airflow — the motor does not sit in air laden with vapours
Which Euroventilatori codes and series are requested most often?
| Code | Description |
|---|---|
| AP | High-pressure centrifugal, direct coupling |
| APC | High-pressure centrifugal, belt drive |
| APR | High pressure, backward-blade impeller |
| APRD | Two-stage centrifugal |
| EU | Medium-pressure centrifugal, reverse blades |
| EUM | Medium pressure, special-profile impeller |
| MPR | Low and medium pressure, granular dust |
| TPALC | Centrifugal for wool and fibres |
| TTRC | Robust centrifugal with open impeller |
| BPR | Low pressure, backward-curved blades |
| BPRDC | Low pressure, double inlet, belt drive |
| BT | Roof extraction tower |
| EVC | Propeller axial fan for paint booths |
| EVF | Axial with short drum and double flange |
Where is Euroventilatori equipment used?
- Steel and foundries — combustion air and dust extraction
- Food industry and milling — pneumatic conveying and extraction
- Woodworking, glass and paper — extraction of chips and waste
- Textiles — conveying of fibres, wool and rags
- Chemicals and energy — extraction of air and process gases
How do we supply Euroventilatori in Romania?
We can quote Euroventilatori centrifugal and axial fans for extraction, pneumatic conveying, exhaust and ventilation. For a correct quotation send the series and size from the nameplate or, for a new installation, the airflow, pressure, temperature and nature of the air (clean, with dust, with chips, with fibres), the motor voltage and the direction of rotation. Fans are supplied to order, in a usual interval of 1–4 weeks. For special versions the time can be longer, and the exact date is stated in the quotation.
The ATEX version is assessed for each series, because not all axial series can be made in this version.
Frequently asked questions about Euroventilatori
What are the AP, EU, BP and EVC series at Euroventilatori?
The AP series is a high-pressure centrifugal fan, EU a medium-pressure centrifugal one, and EVC an axial propeller fan for paint booths. Euroventilatori makes, at San Pietro Mussolino in Italy, low-pressure axial and low, medium and high pressure centrifugal industrial fans, plus motors, special versions and accessories. The company has been active since 1981, and the applications range from steel and milling to chemicals and the marine industry.
How do I choose between the direct-drive and the belt-driven series?
Direct-drive series, for example AP or BP, work up to about 80 °C, or 150 °C with a cooling fan. Belt-driven ones, for example APC or BPC, reach 90 °C, and up to 350 °C with a thermal protection fan. Send the temperature, airflow and pressure.
Do you supply Euroventilatori in Romania and how fast?
Yes. Euroventilatori fans are supplied to order and usually arrive in 1–4 weeks. An item can ship in 24–72 h when the item is in stock, locally or at the supplier. For special versions the lead time can be longer; we fix the exact date in the quotation.
Can I replace an older fan with a Euroventilatori model?
This can be checked if you send the fan nameplate, the airflow and pressure in the installation, the inlet diameter, the direction of rotation and the position of the discharge outlet. We check compatibility only after comparing the data, and you receive the result in the quotation.
How do I request a Euroventilatori quotation?
Send the Euroventilatori code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Euroventilatori International Srl (manufacturer documentation)

