Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Expo Technologies supplier in Romania

Ex p purging and pressurisation systems for motors and enclosures

Headquarters: Sunbury-on-Thames, United Kingdom

Request a quote

Who is Expo Technologies and what does it make?

Expo Technologies is a British manufacturer, with offices in Sunbury-on-Thames, specialised in a single field: protecting electrical equipment in explosive atmospheres by purging and pressurisation (the Ex p type of protection). The principle is simple to explain to a maintenance engineer: instead of an enclosure that withstands an explosion, clean air is kept inside at a higher pressure than outside, and ordinary equipment can operate in the classified area. With more than 70 years of experience, the company has taken part in drafting the standards in the field.

The range goes from systems for large electric motors and generators (more than 9,000 machines protected) to electronic units for panels and analyser enclosures. SmartPurge systems can work as X, Y or Z type purging, with loss compensation or continuous flow, and the D818 series uses CLAPS technology, which automatically adjusts the compensation when the pressure in the machine varies at sudden starts. The PressurEx enclosures are designed from the outset for pressurisation, with small leaks, so that compressed air is not wasted.

Expo systems are found either as a purging system fitted at the factory on motors and analysers, or as a solution chosen in a project when a piece of equipment does not exist in an explosion-proof version. Certifications and approvals are specified in the manufacturer's documentation, and production takes place in the United Kingdom, USA and China.

What do we supply from the Expo Technologies range?

ProductDescription
SmartPurge IIAn electronic purging and pressurisation system for electrical enclosures, configurable as type X, Y or Z, with a purge flow of up to 540 Nl/min. It comprises the control unit and the air supply unit; there is also a version with a fan (SPII-F).
SmartPurge ZA compact, fully automatic unit for low-risk areas (Zone 2, Class I Div 2). It protects enclosures of up to 6.1 m³, with automatic loss compensation and LED signalling, in a single body that is quick to install.
Motor purging systems, D seriesThe D758, D808 and D818 family for rotating electrical machines in classified areas. The D818 delivers up to 1,500 Nl/min and uses CLAPS technology for stable pressure in the machine.
PressurExStainless steel enclosures designed for pressurisation, in 20 standard sizes, with IP66 or Type 4X protection and the purging system installed. They reduce compressed air consumption compared with ordinary Ex enclosures, which are designed only to keep the explosive atmosphere out.

Why Expo Technologies?

  • Specialisation in Ex p — the company makes purging and pressurisation, not a general range of Ex equipment, so motor, panel and room applications are covered with dedicated products
  • SmartPurge II configurable as X, Y or Z — purge flow of up to 540 Nl/min, with loss compensation, dilution or continuous flow modes
  • CLAPS technology on the D818 series — the system detects a rise or fall of the internal pressure and adjusts the compensation, useful on large motors with sudden starts
  • PressurEx enclosures with reduced leakage — 20 standard sizes in 2–3 mm stainless steel, IP66 or Type 4X, with the purging system already fitted
  • Approvals according to the manufacturer's documentation, relevant for machinery that moves between markets

Which Expo Technologies codes and series are requested most often?

CodeDescription
SmartPurge II (SPII)X, Y or Z purging, up to 540 Nl/min
SPII-FSmartPurge II version with fan
SmartPurge ZAutomatic type Z purging, enclosures up to 6.1 m³
MiniPurge Type Z(Y)Manual Z/Y purging, up to 900 Nl/min, enclosures up to 5.4 m³
D758Purging and pressurisation system for motors
D808Purging and pressurisation system for motors
D818Motors, up to 1,500 Nl/min, CLAPS technology
3PV / 5PV / 7PVPre-start ventilation systems for motors
MiniEPSClean-air pressurisation for enclosures in dirty environments, up to 7 m³
PressurExStainless steel enclosures for pressurisation, 20 standard sizes
RP-Max-ZRoom pressurisation, ventilation up to 4,700 m³/h
FFDDigital intrinsically safe valves, frictionless

Where is Expo Technologies equipment used?

  • Oil and gas — large motors and generators in classified areas, control panels on process plants
  • Chemicals and petrochemicals — enclosures with standard electronics near processes with flammable vapours
  • Analysers and OEM equipment — pressurised enclosures for gas and liquid analysers
  • Power generation — protection of high-power motors and generators
  • Pharmaceutical and biotechnology — equipment with ordinary electronics in classified rooms

How do we supply Expo Technologies in Romania?

We can quote Expo purging and pressurisation systems for motors, panels and analyser enclosures, once we clarify the type of protection needed. The systems are supplied to order; the lead time is usually 1–4 weeks, and project configurations may take longer. For a quotation send the zone class (0, 1 or 2), the enclosure volume or the motor type and power, the available air pressure and the nameplate of the existing system, if you are replacing one. We identify the suitable series on the basis of this data.

The equivalence of a purging system with one already fitted on the machine is established after checking; the conformity of the assembly for explosive atmospheres remains tied to the enclosure and to the installation documentation.

Frequently asked questions about Expo Technologies

What does Expo Technologies do and what does Ex p mean?

Expo makes purging and pressurisation systems for electrical equipment in explosive atmospheres. Ex p means that an enclosure is cleared of dangerous gases by purging, then kept under pressure with clean air, so that the standard equipment inside can operate in a classified area.

How do I choose between SmartPurge Z and SmartPurge II?

SmartPurge Z is an automatic unit for Zone 2 and enclosures of up to 6.1 m³. SmartPurge II can be configured as type X, Y or Z and reaches 540 Nl/min. The choice depends on the zone class, the enclosure volume and the air available, so this data matters before the quotation.

Can you supply Expo systems in Romania and how fast?

Yes. Purging systems are supplied to order, usually in 1–4 weeks. For motor systems configured per project the lead time may be longer. The exact value is confirmed in the quotation, once we know the zone class and the enclosure or motor data.

Can I replace an old purging system with a current one?

Sometimes, but not automatically: the type of protection, the flow required and the interface with the existing control matter. Send us the make and the code from the nameplate of the installed system, plus the enclosure volume, so that we can check which current version fits.

What information do you need for a quotation on a purging system?

The zone classification, the enclosure volume or the motor data (power, type, voltage), the pressure and quality of the instrument air available, the ambient temperature and, if there is one, the ATEX documentation of the machinery. With these we prepare the complete quotation.

How do I request a Expo Technologies quotation?

Send the Expo Technologies code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Expo Technologies (manufacturer documentation)