Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

MELTRIC supplier in Romania

DECONTACTOR industrial plugs and receptacles, multipin, Ex, high-current

Founded in 1982 · Headquarters: Franklin (Wisconsin), USA

Request a quote

Who is MELTRIC and what does it make?

MELTRIC is an American manufacturer from Franklin, Wisconsin, which has made industrial plugs and receptacles since 1982. The distinctive element is DECONTACTOR technology: one device combines the functions of a switch with those of a plug and receptacle, so it can be connected and disconnected safely under full load, by push button, with silver-nickel spring contacts, arc extinguishing chambers and a dead-front construction. The company makes hundreds of thousands of such devices. Besides the Switch-Rated series (DS and DSN), the range includes multipin, high-ampacity, single-phase, high-temperature, direct-current and hazardous-location devices.

For an electrician or a maintenance manager, the advantage is replacing the classic receptacle-plug plus isolator combination, which needs two operations and often a switch alongside, with a single part. The hazardous-location series covers zones 1 and 2, 21 and 22, and Class 1 and 2, Division 2. The configurations for explosion-hazard zones, according to the manufacturer's documentation, run from 20 A to 125 A in three-phase and up to 680 A in the single pole version, and those with approvals from 20 A to 250 A and up to 600 A respectively. The multipin Ex versions have 12, 25 or 37 contacts in metal housings, for signal, control and low-power circuits. The DR400 series offers 400 A in a relatively compact format.

In Romania, requests come from maintenance teams in power plants, mines, refineries, the food industry, water treatment, steelworks and ports. In a quotation, the current, voltage, number of poles, Ex zone, housing material and cable type matter.

What do we supply from the MELTRIC range?

ProductDescription
Switch-Rated DS and DSNPlugs and receptacles with DECONTACTOR technology, a push button for disconnection, arc chambers and a safety cover. Existing pin and sleeve devices from other manufacturers can be replaced.
Hazardous locations (DX, DXN)Ex receptacles and plugs for zones 1/2 and 21/22, with plastic or metal housings, DX with variants for explosion-hazard zones, from 20 A to 125 A; DXN with approvals according to the manufacturer's documentation, from 20 A to 60 A.
Multipin DSN12C, DSN24C, DSN37CDevices with 12, 25 and 37 contacts for control, signal and low power, including in Ex versions, in plug and box configurations, panel receptacle, reverse service or cable-to-cable.
High Ampacity (DR) and RETTBOX SHigh-current devices, multiphase, three-phase or single-phase, from DR30 to DR400, for shore power, mining machinery and generators, plus the RETTBOX S distribution units.

Why MELTRIC?

  • Switch-Rated with DECONTACTOR — connection and disconnection under load, by push button, with arc chambers and a safety cover, instead of a separate plug and switch
  • Ex range from 20 A to 125 A three-phase, with ATEX variants according to the manufacturer's documentation — and up to 680 A in the single pole version, for zones 1, 2, 21 and 22
  • Multipin Ex with 12, 25 or 37 contacts — suited to 4–20 mA signals and circuits up to 10 A (440 V on the 25-contact version), with interlocking devices
  • Silver-nickel spring contacts — low contact resistance and long life under repeated cycles
  • Custom distribution units — portable rubber boxes, multigang housings and receptacles with protection, built from its own devices

Which MELTRIC codes and series are requested most often?

CodeDescription
DS30Switch-Rated device from the DS series
DS60Switch-Rated device from the DS series
DSN150Switch-Rated device from the DSN series
DXN20Hazardous-location device, DXN series
DXN30Hazardous-location device, DXN series
DXN60Hazardous-location device, DXN series
DX1Hazardous-location device, DX series
DX3Hazardous-location device, DX series
DX6Hazardous-location device, DX series
DX9Hazardous-location device, DX series
DSN12CMultipin from the DSN range
DSN24CMultipin from the DSN range
DSN37CMultipin from the DSN range
DR100High-ampacity device, DR series
DR400High-ampacity device, 400 A

Where is MELTRIC equipment used?

  • Electric power — shore power, generators, temporary distribution
  • Mining — mobile machinery with frequent coupling
  • Oil, gas and chemicals — Ex receptacles and plugs for classified areas
  • Steel and aluminium — connections for mobile equipment
  • Water, food and rail — sealed receptacles for wet environments

How do we supply MELTRIC in Romania?

We can quote MELTRIC receptacles, plugs and distribution units, from the DS and DSN series to the Ex versions and the high-current devices. They are supplied to order, usually in 1–4 weeks; custom configurations, multigang housings and distribution boxes can have a longer time, confirmed in the quotation. For a correct quotation, it helps to have the code on the existing device, the current and voltage, the number of poles, the Ex zone and temperature class, the cable type and the mounting form (panel receptacle, box, cable-to-cable). For replacements, send the manufacturer's name and the series of the old device.

The series suited to a device from another manufacturer is chosen from the nameplate data, and approvals, according to the manufacturer's documentation, differ between series, so the project requirement is stated in the request.

Frequently asked questions about MELTRIC

What products does MELTRIC make?

MELTRIC, an American company from Franklin, Wisconsin, has made industrial plugs and receptacles since 1982: Switch-Rated devices with DECONTACTOR technology, multipin, high-current, for high temperatures, direct current and hazardous locations, plus power distribution units.

How do I choose between a DS and a DSN device?

Both are Switch-Rated, with DECONTACTOR technology and push-button disconnection. They differ in current and configuration: for example DS30 and DS60, versus DSN150. The choice starts from the rated current, voltage, number of poles and the device you are replacing. Send us its nameplate.

Can you supply MELTRIC products in Romania and within what time?

Yes, to order; standard devices usually arrive in 1–4 weeks. For custom distribution units, multigang housings or Ex devices with special configurations, the time can be longer. The exact time appears in the quotation, once we have the current, voltage and area of use.

Can I replace a pin and sleeve connector with a MELTRIC device?

The DS/DSN series is an alternative to pin and sleeve devices from other manufacturers, but replacement is not direct without checking, because dimensions and pole positions differ. Send the make, series, current, voltage and earth conductor position, and we check the option.

What details do you need for an Ex receptacle quotation?

The zone (gas or dust) and gas group, temperature class, current and voltage, number of poles, mounting type (panel receptacle, box or cable-to-cable) and the certification required: ATEX and IECEx from 20 to 125 A three-phase, or cCSAus up to 250 A. State the cable used as well.

How do I request a MELTRIC quotation?

Send the MELTRIC code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: MELTRIC Corporation (manufacturer documentation)