Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

E2S Warning Signals supplier in Romania

For E2S we quote beacons and sounders for Ex zones from the BEx, GNEx, D1x, D2x and E2x families, plus fire and industrial signals; for a quotation we need the Ex zone, the gas or dust group, the voltage and the signal type.

Headquarters: London, United Kingdom

Request a quote

Who is E2S Warning Signals and what does it make?

E2S Warning Signals is a British manufacturer of acoustic and visual signals, with its headquarters and factory in London. The range is divided into three directions: signalling for explosion-risk zones, signalling for fire and industry, and wide-area signalling, with horns and pole-mounted loudspeakers. The factory has its own test laboratory, with an anechoic chamber for sound measurement, a spectrometer for light analysis, a climatic chamber and an electromagnetic compatibility laboratory, and the company holds certifications according to the manufacturer's documentation.

In Ex zones (zones 1, 2, 21 and 22) there are two solutions: flameproof units, in a housing strong enough that an internal explosion does not escape to the outside, and intrinsically safe units, in which the energy received is limited. The BEx family has an LM6 aluminium housing and ATEX versions according to the manufacturer's documentation, with 5 J xenon beacons (BExBG05, 120 cd, functional safety versions) and LED beacons (BExBGL2, 160 cd). GNEx has a glass-fibre-reinforced polyester housing, IP66, and works in the same zones. The D1x and D2x series take account of the North American classes and divisions (Class I and II, Div 1 and 2), and E2x is the non-sparking version for zones 2 and 22.

For a correct quotation, what matters is the Ex zone, the gas or dust group, the temperature class, the supply voltage, the signal type (acoustic, visual or combined), the required light intensity or sound level, the cable gland and the SIL requirements, if any.

What do we supply from the E2S Warning Signals range?

ProductDescription
BEx — flameproof beacons and hornsFlameproof units in an LM6 aluminium housing, for zones 1, 2, 21 and 22, with approvals according to the manufacturer's documentation. BExBG05 is a 5 J, 120 cd xenon beacon, BExBGL2 a 160 cd multifunction LED beacon, BExS110 a horn.
GNEx — signals in a reinforced polyester housingXenon beacons (GNExB1X05, GNExB2X05) and multifunction LED beacons (GNExB2LD2), in a glass-fibre-reinforced polyester housing, IP66, corrosion resistant, with an extended temperature range. They suit zones 1, 2, 21 and 22.
D1x and D2x — for Class I and II, Div 1 and 2D1x covers flameproof signals for Class I and II, Div 1, zones 1 and 21, with xenon strobes and LED beacons from the D1xB2 range. D2x includes LED beacons and combined signals for Div 2 and zones 2 and 22 (D2xB1LD3, D2xC2LD3), tested to UL1971 and UL464.
E2x and fire and industrial signallingE2x comprises non-sparking devices for Class I and II, Div 2 and zones 2 and 22. Outside Ex zones there are fire and industrial signals and, for wide areas, horns and pole-mounted loudspeakers, with radio control.

Why E2S Warning Signals?

  • Separate families for each zone type — BEx in LM6 aluminium, GNEx in IP66 reinforced polyester, D1x and D2x for Class I and II, E2x for zones 2 and 22
  • BEx beacons with 5 J xenon and 120 cd, in SIL 1 and SIL 2 versions — for safety circuits that call for a SIL level
  • Versions for explosion-risk zones in BEx and GNEx for zones 1, 2, 21 and 22
  • Own test laboratory, with an anechoic chamber, spectrometer, climatic chamber and EMC — sound and light checked before delivery
  • Three signalling directions — Ex zones, fire and industry, wide area

Which E2S Warning Signals codes and series are requested most often?

CodeDescription
BExBG05Flameproof xenon beacon, 5 J, 120 cd, functional safety versions
BExBGL2Multifunction LED beacon, 160 cd, flameproof
BExS110Flameproof horn in LM6 aluminium
GNExB1X05Xenon beacon, 5 J, IP66 reinforced polyester housing
GNExB2X05Xenon beacon, 5 J, reinforced polyester housing
GNExB2LD2Multifunction LED beacon, IP66 reinforced polyester
D1xFlameproof family for Class I and II, Div 1, zone 1
D1xB2Range of xenon strobes and LED beacons, Div 1, zones 1 and 21
D2xFamily for Class I and II, Div 2, global applications in hazardous areas
D2xB1LD3Synchronised LED beacon, UL1971, Div 2, zones 2 and 22
D2xC2LD3Synchronised horn and LED, UL464 and UL1971, Div 2
E2xFamily of non-sparking devices, Class I and II Div 2

Where is E2S Warning Signals equipment used?

  • Petrochemicals and refineries — flameproof beacons and horns in zones with flammable gases
  • Oil and gas, including offshore platforms — alarm signalling in Ex zones
  • Food industry — signalling in zones with combustible dust
  • Grain silos and sugar factories — alarms in zones with dust explosion risk
  • Major-accident-hazard installations — sirens for wide areas

How do we supply E2S Warning Signals in Romania?

We can quote beacons, horns and combined signals for Ex zones from the E2S range, as well as fire and industrial signals. For a correct quotation, send the code from the signal's nameplate or, for a new project, the zone (1, 2, 21 or 22) and the class or division, the gas or dust group, the temperature class, the supply voltage, the signal type and the SIL requirements. We bring in the signals to order, usually in 1–4 weeks; standard items: 24–72 h when the item is in stock, locally or at the supplier. For special versions, depending on the specification, the lead time can be longer. The exact lead time appears in the quotation.

The approvals of a signal for a specific Ex zone are established from the complete marking on the nameplate and the data on the gas or dust in the installation.

Frequently asked questions about E2S Warning Signals

What does E2S Warning Signals make?

E2S makes acoustic and visual signals in London: xenon or LED beacons, horns and combined signals for explosion-risk zones, for fire and industry, as well as sirens for wide areas. Families such as BEx, GNEx, D1x, D2x and E2x cover Ex zones 1, 2, 21 and 22.

How do I choose between a flameproof unit and an intrinsically safe one?

Flameproof units have a strong housing and are larger, usually mounted outdoors; intrinsically safe ones limit the energy received and are small. Tell us the zone, the gas or dust in the zone and whether you have a Zener barrier or an isolating interface in the circuit.

Do you supply E2S signals in Romania and how fast?

Yes, to order: the signals usually arrive in 1–4 weeks. For current codes: 24–72 h when the item is in stock, locally or at the supplier. For special versions, depending on the specification, the lead time can be longer. We confirm the exact lead time in the quotation.

I have an old BEx or GNEx beacon; what data do you need for a replacement?

The complete code from the nameplate (for example BExBG05 or GNExB2LD2), the Ex marking, the supply voltage and the cable entry type. A photo of the nameplate helps. With this data we check whether the item is still in the range or has been replaced by a new version.

What do I need to state for a quotation on a flameproof beacon?

The zone (1, 2, 21 or 22), the gas or dust group, the temperature class, the voltage, the type of light (5 J xenon or LED), the required SIL level and the cable gland. For North American installations, also state the class and division. On this basis we propose the suitable series.

How do I request a E2S Warning Signals quotation?

Send the E2S Warning Signals code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: E2S Warning Signals (manufacturer documentation)