Gühring supplier in Romania
For Gühring we quote RT 100 XF and InoxPro drills, BT 800 heads, RF 100 Speed, Diver and Sharp end mills, HR 500 reamers and SteelPro taps, based on the material machined, the diameter and the tool code.
Founded in 1898 · Headquarters: Albstadt, Germany
Who is Gühring and what does it make?
Gühring is a German manufacturer of precision cutting tools, based in Albstadt and active since 1898. The company has in-house carbide production, grinding, in-house geometries and coating technology, which allows it to design the tool as a system of material, geometry and coating. The programme covers drills, end mills, reamers, threading tools, countersinking and deburring tools, deep-hole drills, grooving tools, tools with PCD (polycrystalline diamond) and PCBN (cubic boron nitride), clamping systems and tool dispensing systems.
Among the current series, RT 100 XF is a solid carbide drill for high chip volumes, with four guide margins from 3xD upwards and increased feed, and RT 100 InoxPro is the high-performance drill for stainless steels and titanium alloys. The BT 800 system has an exchangeable drill head, with a bayonet interface, on a standardised steel body, where only the worn head is replaced. The end mills in the RF 100 family are RF 100 Speed (an HPC, that is high-performance, end mill with a 48° helix and fragmented chips), RF 100 Diver (a plunge milling cutter for five operations: drilling, ramping, slotting, roughing and finishing, with a 60° ramp angle) and RF 100 Sharp. The HR 500 high-performance reamers cover diameters from 1.95 to 76 mm, and the SteelPro tap is for blind holes in steel.
These tools appear in machining workshops, at vehicle and machinery plants, in die and mould making, in the energy sector and aeronautics, and in the machining of stainless steel, titanium and steels. The choice depends on the material machined, diameter, usable length, shank type, coating and coolant, which is why the quotation starts from the tool code or from the part drawing.
What do we supply from the Gühring range?
| Product | Description |
|---|---|
| RT 100 XF and RT 100 InoxPro drills | Solid carbide drills: RT 100 XF has carbide developed for hardness and toughness, double guide margins from 3xD and high feed, and RT 100 InoxPro is for stainless steels and titanium, with dedicated geometry and coating. |
| BT 800 drilling system | Modular system with a drill head exchangeable through a bayonet interface on a steel body, useful above all at diameters over 14 mm. Only the head is replaced, and it can be re-sharpened up to two times; different heads suit different materials. |
| RF 100 Speed, RF 100 Diver and RF 100 Sharp end mills | Carbide end mills: Speed is an HPC end mill with a 48° helix and chip breaker, Diver performs drilling, ramping, slotting, roughing and finishing with the same tool, at a 60° ramp, and Sharp is the sharp-edged end mill in the programme. |
| HR 500 reamers and threading tools | HR 500 high-performance reamers, from 1.95 to 76 mm, with versions for almost all materials, and threading tools: taps, including SteelPro for blind holes in steel, forming taps and thread mills. |
Why Gühring?
- In-house carbide and coating production — the tool is designed as a system of substrate, geometry and coating, from grinding to coating
- RT 100 XF and RT 100 InoxPro drills — solid carbide with four guide margins from 3xD, for high feed and for stainless steel and titanium respectively
- BT 800 modular system — exchangeable drill head on a bayonet interface, replacing only the worn head, with re-sharpening of up to two times
- RF 100 Speed, Diver and Sharp end mills — HPC with 48° helix, plunge milling at a 60° ramp and a carbide end mill with a sharp cutting edge
- HR 500 reamers in diameters of 1.95–76 mm — versions for almost all materials, with geometry and coolant for controlled chip evacuation
Which Gühring codes and series are requested most often?
| Code | Description |
|---|---|
| RT 100 XF | Solid carbide drill, four guide margins from 3xD |
| RT 100 InoxPro | Solid carbide drill for stainless steel and titanium |
| BT 800 | Drilling system with exchangeable head, bayonet interface |
| RF 100 Speed | HPC carbide end mill, 48° helix |
| RF 100 Diver | Plunge milling cutter for five operations, 60° ramp |
| RF 100 Sharp | Carbide end mill with sharp cutting edge |
| HR 500 | High-performance reamer, 1.95–76 mm |
| SteelPro | Tap for blind holes in steel |
| Modular drill bits | Modular drills with exchangeable head |
| Deep hole drills | Drills for deep holes |
| Countersinking tools | Countersinking and deburring tools |
| Grooving tools | Grooving tools |
Where is Gühring equipment used?
- Automotive industry — drills, end mills and taps for series machining
- Aeronautics — machining of titanium and stainless steel
- Energy and mechanical engineering — precision drills, reamers and end mills
- Dies and moulds — HPC milling and plunge milling of steels
- Operation and maintenance — tools for maintenance workshops and for high-precision parts
How do we supply Gühring in Romania?
We can quote Gühring tools from the drilling, milling, reaming and threading programmes: RT 100 drills, the BT 800 system, RF 100 end mills, HR 500 reamers and taps, supplying them to order. To order, the usual lead time is 1–4 weeks; for special tools, depending on the specification, it may be longer. For a correct quotation send us the tool code (for example RT 100 XF or HR 500), the diameter, the usable length, the shank type, the material machined, the coating wanted and whether the machine has internal coolant. For special tools add the part drawing.
The suitable series is indicated on the basis of the material machined, the diameter and the shank type, and a specific dimension is confirmed on request.
Frequently asked questions about Gühring
What does Gühring make?
Gühring has made precision cutting tools at Albstadt since 1898: drills, end mills, reamers, threading tools, countersinking and deburring tools, deep-hole drills, tools with PCD and PCBN and clamping systems. The company has in-house carbide production and coating technology.
How do I choose between an RT 100 XF drill and an RT 100 InoxPro?
RT 100 XF is the high-performance drill for high chip volumes, with four guide margins from 3xD, and RT 100 InoxPro is made for stainless steels and titanium alloys. Send us the material, the diameter, the length and the coolant.
Do you supply Gühring tools in Romania, and how fast?
Gühring tools are brought in to order, usually in 1–4 weeks. For special tools or unusual dimensions, depending on the specification, the lead time may be longer. A drill or an end mill can ship in 24–72 h when the item is in stock, locally or at the supplier. The exact lead time is given in the quotation.
Can I replace a drill with the BT 800 system?
The BT 800 system has an exchangeable head and becomes advantageous above all at diameters over 14 mm, where only the head is replaced. The diameter, length, shank and material machined are checked; a direct replacement is judged only with these data. Send us the current drill and the machine.
What data should I send for a quotation on Gühring tools?
Send the tool type (drill, end mill, reamer, tap), the code or series, the diameter, the usable length, the shank type, the material machined, the coating wanted, the quantity and whether the machine has internal coolant. For a special tool attach the drawing, the tolerances and the total quantity of the order.
How do I request a Gühring quotation?
Send the Gühring code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Gühring KG (manufacturer documentation)

