Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Hallite supplier in Romania

For Hallite we quote rod seals in series 605, 610, 621 and 652, piston seals 56, 58 and 735, wipers 839 and 847, and R16, RDA and GP2 seals, based on groove size, pressure and temperature.

Founded in 1903 · Headquarters: Hampton (Middlesex), United Kingdom

Request a quote

Who is Hallite and what does it make?

Hallite has made seals, wipers and guide rings for hydraulic and pneumatic cylinders since 1903. The range is organised by function in the cylinder: rod seals, which retain the fluid inside; piston seals, for single-acting and double-acting cylinders; chevron (V) packings for medium and heavy loads; wipers, which keep contaminants out; guide rings; pivot seals; rod buffer seals; pneumatic seals and static seals. Each series carries a number or code, and that code identifies the profile, the material and the pressure range.

On rod seals, series 601, 605, 610, 620 and 622 are rated for 400 bar between −45 and +110 °C, at speeds of 1 m/s, while 621 and 652 reach 700 bar, with 652 intended for longwall mining with water-based fluids. Series R16, RCG, RDA and RDS work between −45 and +200 °C, at speeds of 15 m/s. On pistons, series 56 and 68 withstand 500 bar, 58 withstands 700 bar, 735 has a compact form for one-piece pistons, and GP2 and PDS use PTFE with an O-ring energiser for temperatures up to 200 °C. Wipers range from series 33, with a single lip, to 839, with a double lip, and 847, for earthmoving machinery.

For a replacement, what matters is the series on the old seal, the groove dimensions (bore or rod diameter, width and depth), pressure, temperature, speed and fluid. From these data we identify the matching series.

What do we supply from the Hallite range?

ProductDescription
Rod seals (series 15–716SPN, R16, RCG, RDA, RDS)U-seals or double-lip seals, made of Hythane 181 polyurethane or polyester. Series 605, 610, 620 and 622 work at 400 bar, 621 and 652 at 700 bar, and R16, RDA and RDS with PTFE reach 200 °C and 15 m/s.
Piston seals (series 50–780, GP2, PDS)Seals for single-acting pistons (15, 18, 601, 606, 656) and double-acting pistons (56, 58, 64, 65, 68, 735, 777, 780). Series 58 withstands 700 bar and allows shorter pistons, while GP2 and PDS use PTFE energised by an O-ring.
Wipers (series 33–864, E2W, E5W, ELA, EXF, EXG)Single-lip or double-lip wipers, snap-in type or with a pressed-in metal case. Series 839 fits many ISO 6195C sizes, 844 collects the fluid that passes the rod seal, 847 is for excavators, and E2W and E5W work at 15 m/s.
V packings, guide rings and special sealsChevron (V) packings (series 07, 09, 11, 13, 14), guide rings (87, 506, 533, 540, 565, 708), pivot seals (80, 310, 800, SSP, SSR), rod buffer seals (416, 653, 660), pneumatic seals (607, 609, 661, 667, 851, 853) and static seals.

Why Hallite?

  • Rod seals for 160–700 bar — series 605 and 610 at 400 bar, 621 and 652 at 700 bar, 617 for compact ISO 6020-2 cylinders
  • Versions for temperatures up to 200 °C and speeds of 15 m/s — series R16, RCG, RDA and RDS with PTFE-based materials
  • Wipers for different environments — from series 33 for light dirt to 847 for off-road machinery, plus E2W and E5W with O-ring energisers
  • Single-acting and double-acting piston seals — series 56, 58, 64, 65, 68, 735, 777 and 780, with a rubber, polyurethane or PTFE base
  • Seals for the different functions in a cylinder — rod, piston, wiper, guide, pivot, V packings, pneumatic and static seals

Which Hallite codes and series are requested most often?

CodeDescription
601Single-acting U rod seal, 400 bar
605Asymmetric rod seal, 400 bar
610Double-lip rod seal, 400 bar
621Heavy-duty rod seal, 700 bar
652Rod seal for mining longwalls, 700 bar
R16PTFE rod seal, 600 bar, up to 200 °C
RDADouble-acting PTFE rod seal, 500 bar
56Double-acting piston seal, 500 bar
58Combined piston seal, 700 bar
735Compact piston seal for one-piece pistons
GP2PTFE piston seal with O-rings and X-rings, 500 bar
839Double-lip wiper, snap-in type
847Wiper for off-road machinery
E2WO-ring energised wiper, up to 15 m/s
720Unitised piston for off-road cylinders

Where is Hallite equipment used?

  • Mobile equipment and earthmoving — excavator cylinders with 847 wipers and 58 piston seals
  • Mining — 652 rod seals for longwall cylinders with water-based fluids
  • Agriculture and off-highway machinery — unitised pistons and pivot seals
  • Materials handling — long-stroke cylinders and 846 wipers
  • Industrial machinery — hydraulic and pneumatic cylinders to be refurbished with series seals

How do we supply Hallite in Romania?

We can quote Hallite rod seals, piston seals, wipers and guide rings, supplied to order. The lead time is usually 1–4 weeks to order and, depending on the specification, can be longer for unusual sizes. For a correct quotation, send us the series and size from the old seal (rod or bore diameter, groove width and depth), the pressure, temperature, speed and fluid, and the cylinder type. A photo of the seal and the groove helps with identification.

The series is identified from the groove dimensions and the working conditions, and the material is confirmed on the full seal code.

Frequently asked questions about Hallite

What does Hallite make?

Hallite has made seals, wipers and guide rings for hydraulic and pneumatic cylinders since 1903. The range covers rod and piston seals, V packings, pivot seals, buffer seals, and pneumatic and static seals, each identified by a series number.

How do I choose between series 605, 610 and 621?

Series 605 and 610 work up to 400 bar, between −45 and +110 °C, while 621 and 652 reach 700 bar, with 652 intended for water-based fluids in longwalls. Pressure, temperature and groove size matter. Send us the cylinder data and we will recommend the series.

Do you supply Hallite seals in Romania, and how fast?

Yes, supplied to order, usually in 1–4 weeks. For unusual sizes the lead time can be longer, depending on the specification. You receive the exact lead time in the quotation, once we know the series and the dimensions.

Can I replace an old seal with a Hallite series?

This is checked from the groove dimensions, pressure, temperature, speed and fluid. Equivalence is confirmed once the data have been compared; send the marking of the old seal, the dimensions on the drawing and a photo of the groove, and we determine whether a Hallite series fits.

What data do I send for a quotation on a cylinder seal set?

Specify the bore and rod diameter, the stroke, the working pressure, temperature, speed, the fluid and the cylinder type (single-acting or double-acting). If you have the old seal, add the series and a photo of the groove, so that we include the matching wiper and guide ring.

How do I request a Hallite quotation?

Send the Hallite code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Hallite (manufacturer documentation)