Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

hotset supplier in Romania

Cartridges, tubular and coil heaters, temperature control channels and thermocouples

Headquarters: Lüdenscheid, Germany

Request a quote

Who is hotset and what does it make?

hotset is a German thermal technology company from Lüdenscheid, in South Westphalia, with certifications stated in the manufacturer's documentation. It makes heating elements and the components that go with them: cartridges, tubular heaters, coil heaters, flexible temperature control channels, thermocouples and controllers. Its customers are in plastics processing, hot runner systems, tool and mould making, foundries, the food industry and packaging. The common idea is to bring the heat exactly where it is needed, not to heat the whole mould.

The product names also indicate the type. hotrod is the cartridge (types HHP and LHT), hotflex is a tubular heater that can be bent by hand in three dimensions, in round section (Ø 6.5 and 8.5 mm) or square section (6 × 6 and 8 × 8 mm), and hotspring is the coil heater presented as early as 1980, with the Micro, Mini and Maxi versions. hottube covers round, flat and square tubular heaters, including in Incoloy. tempflex are flexible stainless steel channels for contour-following temperature control, up to 250 °C and 10 bar, in sections of 8 × 8 and 12 × 12 mm. hotcast includes heaters for the zinc die casting nozzle (GMH, OMH, ZD 50/80, ZD 125).

In Romania, these parts appear on injection moulds and on casting machines brought in from abroad, on the sealing bars of packaging machines and in laboratory equipment. As with any cartridge, the diameter, length, voltage and power determine compatibility.

What do we supply from the hotset range?

ProductDescription
hotrod (HHP and LHT heating cartridges)Cartridges with a precision bore for moulds, sealing bars, dies, cutting knives, embossing rollers and analysis equipment. The HHP and LHT types are the company's basic products, with a connection zone protected against moisture.
hotspring and hottubeCoil heaters (hotspring Micro, Mini, Maxi, WRP types) and round, flat or square tubular heaters, plus hotflex, bendable in three dimensions. They are used on hot runner manifolds and nozzles, and on sealing bars and heads.
tempflex and hotcasttempflex: flexible stainless steel temperature control channels, with quick brass or stainless steel connectors. hotcast: closed or open heaters for the casting nozzle and for zinc die casting nozzles, which shorten the cycle.
AlN heaters and control componentsThe Hi-Watty Light aluminium nitride ceramic heater, of 45–1,600 W at 100–200 V, for the fast heating and cooling of liquids and gases, plus thermocouples (J, L, K) and hotcontrol resistance thermometers.

Why hotset?

  • hotflex, a tubular heater that can be bent by hand in three dimensions — follows the shape of the tool and reduces the mould mass and the number of spare parts
  • hotspring with the Micro, Mini and Maxi versions (for example WRP 4.8 × 8.6) — covers hot runners from small to large sizes, including an IP65 version
  • tempflex, flexible stainless steel channel, 200–2,600 mm, 250 °C and 10 bar — contour-following temperature control without deep holes in the mould
  • hotcast for die casting — closed nozzle heater (GMH) using up to 60% less energy than cartridges
  • Thermocouples and controllers also from hotset — the element, the sensor and the control unit match each other

Which hotset codes and series are requested most often?

CodeDescription
HHPhotrod heating cartridge
LHThotrod heating cartridge
hotflexBendable tubular heater, Ø 6.5 and 8.5 mm, 6 × 6 and 8 × 8 mm
hotspring MicroSmall coil heater, WRP/F 1.0 × 1.6
hotspring MiniCoil heater, WRP 1.3 × 2.3
hotspring MaxiLarge coil heater, WRP 4.8 × 8.6
hottubeRound, flat, square tubular heaters, Incoloy
tempflexFlexible temperature control channel, 8 × 8 and 12 × 12 mm
hotcast GMHClosed nozzle heater for die casting
hotcast OMHOpen nozzle heater, economy version
ZD 50/80, ZD 125Casting nozzles for zinc die casting
Hi-Watty LightAlN heater, 45–1,600 W, 100–200 V

Where is hotset equipment used?

  • Hot runners and injection moulds — cartridges, coils and thermocouples
  • Foundries and die casting — hotcast nozzles and heaters
  • Packaging — sealing bars and heads, marking dies
  • Textiles and paper — heated knives and embossing rollers
  • Laboratory and electronics — AlN ceramic heaters and analysis equipment

How do we supply hotset in Romania?

We can quote hotset cartridges, tubular and coil heaters, tempflex channels and thermocouples to replace existing parts, starting from the type and the data engraved on the part. We supply to order; usually 1–4 weeks, and for special versions, controllers or large quantity deliveries the lead time can be longer. For a correct quotation it helps to have the type (HHP, LHT, hotspring, hotflex, tempflex), the diameter and length, the power and voltage, the type and length of the lead, the thermocouple type and the maximum temperature. A photo of the old part and of the bore helps with checking.

The replacement is established from the dimensions, power, voltage and lead type on the original part or on the drawing, not from the name alone.

Frequently asked questions about hotset

What products does hotset make?

hotset of Lüdenscheid makes heating elements and control components: hotrod cartridges, hotflex and hottube tubular heaters, hotspring coils, tempflex channels, hotcast heaters for die casting, AlN heaters, thermocouples and controllers.

How do I choose between a cartridge, a coil heater and hotflex?

The cartridge is fitted in a bore and heats at a point, the coil heats hot runner nozzles and manifolds, and hotflex bends to the contour of the tool. The choice depends on the geometry of the part and the power required. Send us the drawing or a photo of the heated part.

How long does delivery to Romania take for hotset products?

Parts are supplied to order, usually in 1–4 weeks. Special versions, controllers or large quantities can take longer. We confirm the exact lead time in the quotation, after identifying the item.

Can I replace a cartridge or coil of another brand with a hotset one?

It depends on five values: diameter, length, power, voltage and lead. With them we determine whether two parts are equivalent. Send a photo of the old part, the markings and the measurements, and we then ask the manufacturer to confirm the version.

What data should I send for a quotation on a tempflex channel?

The length required (200–2,600 mm), the section (8 × 8 or 12 × 12 mm), the working temperature, the medium (water or oil), the pressure and the connector type, metric or in inches. If you have the drawing of the milled channels, send it for checking.

How do I request a hotset quotation?

Send the hotset code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: hotset GmbH (manufacturer documentation)