Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Kamstrup supplier in Romania

For Kamstrup we quote MULTICAL 603 and 803 energy calculators, ULTRAFLOW ultrasonic flow meters and flowIQ 4200 water meters, based on the nominal diameter, the flow rate and the communication module required.

Headquarters: Skanderborg, Denmark

Request a quote

Who is Kamstrup and what does it make?

Kamstrup makes, in Skanderborg (Stilling), heat and cooling energy meters, energy calculators, ultrasonic flow meters for water and remote reading systems. The ultrasonic meters have no moving mechanical parts: the fluid velocity is measured with ultrasound, and the hermetically sealed electronics withstand humidity and operation in flooded chambers. The range is used in district heating networks, in buildings with per-consumer metering and in drinking water distribution networks.

The MULTICAL 603 calculator works as a heat, cooling or combined meter, with one or two flow meters and two or three temperature sensors, in accordance with EN 1434 and Directive 2014/32/EU on measuring instruments (MID). It has a programmable logger with per-minute values, an integration interval of 2 seconds, inputs for electronic and mechanical flow meters and a lithium battery of up to 16 years. MULTICAL 803 has IP65 protection and up to four slots for communication modules, and the ULTRAFLOW sensor is recognised automatically through the Auto Detect function. For water, flowIQ 4200 covers nominal diameters DN125–DN300, nominal flow rates of 160–1000 m³/h, with four ultrasonic sensors and a replaceable battery; the meter integrates both into fixed reading infrastructures (AMI) and into drive-by reading (AMR).

These meters are installed in heat substations, in pumping stations and in water distribution networks, where remote reading through M-Bus or radio is sought. The quotation is based on the meter type, the diameter, the nominal flow rate and the communication module.

What do we supply from the Kamstrup range?

ProductDescription
MULTICAL 603Energy calculator for heat, cooling or combined meters, in accordance with EN 1434 and MID. It has two inputs for flow meters, a per-minute logger, a lithium battery of up to 16 years, optional mains power and two communication modules.
MULTICAL 803Calculator with IP65 protection and up to four slots for communication modules, with access to M-Bus or wM-Bus, a backlit display and leak monitoring and flow limiting functions, with valve control.
ULTRAFLOWUltrasonic flow meter for district heating water, coupled to the MULTICAL calculators. On ULTRAFLOW X4, Auto Detect automatically adjusts the pulse number and the nominal flow rate, so replacement is done without reconfiguration.
flowIQ 4200Ultrasonic meter for drinking water in distribution networks, in stainless steel, with four sensors, accuracy class 2, IP68 and nominal pressure PN16. It is supplied with split cast iron flanges, for DN125–DN300.

Why Kamstrup?

  • Ultrasonic measurement, with no moving parts — the meters have no parts that wear mechanically
  • Universal energy calculator — MULTICAL 603 does heat, cooling or combined metering, with two inputs for flow meters
  • Long-life battery — up to 16 years on MULTICAL 603 and up to 20 years on flowIQ 4200, with a replaceable battery on flowIQ
  • Very wide flow range on flowIQ 4200 — DN125–DN300, nominal flow rates of 160–1000 m³/h and an approved dynamic range up to R1000
  • Integrated remote reading — M-Bus and radio modules on MULTICAL, wired interface to the flowIQ gateway for water networks

Which Kamstrup codes and series are requested most often?

CodeDescription
MULTICAL 603Energy calculator for heat, cooling or combined
MULTICAL 603-FVersion with backlit display
MULTICAL 803IP65 energy calculator, up to 4 communication modules
ULTRAFLOW X4Ultrasonic flow meter for district heating water
flowIQ 4200Ultrasonic water meter, DN125–DN300
flowIQ GatewayGateway for the wired interface of the flowIQ 4200 meter
KWM423OMID approval code of the flowIQ 4200 series
METERTOOL HCWConfiguration tool for MULTICAL calculators
READyReading and configuration software for MULTICAL meters

Where is Kamstrup equipment used?

  • District heating — heat energy metering at heat substations and at consumers
  • Buildings and industrial parks — heat and cooling metering per tenant
  • Drinking water — zone meters and large connection meters in distribution networks
  • Pumping stations and floodable chambers — IP68 meters for buried installation
  • Utilities — remote reading through M-Bus, wM-Bus or radio

How do we supply Kamstrup in Romania?

The MULTICAL 603 and 803 energy calculators, the ULTRAFLOW flow meters and the flowIQ 4200 meters are part of our offer to order. An item can ship in 24–72 h when the item is in stock, locally or at the supplier; otherwise, to order, usually 1–4 weeks, and configurations with communication modules may need longer, depending on the specification. The full code from the meter, the nominal diameter (DN), the nominal flow rate, the fluid temperature, the type of communication wanted (M-Bus, wM-Bus or radio) and the installation location help. A photo of the nameplate with the configuration number makes it easier to identify an existing meter.

Programming the meters and integrating them into a remote reading system remain with the customer or the network integrator.

Frequently asked questions about Kamstrup

What does Kamstrup make?

Kamstrup makes heat and cooling energy meters, MULTICAL energy calculators, ULTRAFLOW ultrasonic flow meters and flowIQ water meters, plus remote reading systems. Its headquarters are in Skanderborg, Denmark, and the meters are used in district heating, buildings and drinking water networks.

How do I choose the diameter of a flowIQ 4200 meter?

The diameter is chosen from the real flow rate of the network, not from the pipe diameter. The series covers DN125–DN300, with nominal flow rates of 160–1000 m³/h and a dynamic range up to R1000. Tell us the minimum and maximum flow rate, the working pressure and whether the installation is buried, and we check the model.

Can you bring in Kamstrup meters to Romania, and how quickly?

The meters are supplied to order, usually in 1–4 weeks; the lead time can come down to 24–72 h when the item is in stock, locally or at the supplier. Depending on the specification, it can be longer; the exact lead time appears in the quotation.

Can I replace the flow meter of a MULTICAL calculator with a new ULTRAFLOW?

On ULTRAFLOW X4, the Auto Detect function automatically adapts the pulse number and the nominal flow rate when the flow meter is changed, without changing the configuration code. For older models compatibility is confirmed after checking; send the series of the calculator and of the flow meter.

What details do I need to send for a quotation on a heat energy meter?

Send the type of installation (heat, cooling or combined), the nominal flow rate or the diameter, the supply–return temperatures, the installation location of the flow meter (supply or return), the power supply wanted (battery or mains) and the communication module, for example M-Bus. The configuration code of an existing meter speeds up the quotation.

How do I request a Kamstrup quotation?

Send the Kamstrup code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Kamstrup A/S (manufacturer documentation)