Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Kistler supplier in Romania

For Kistler we quote 6172B cavity pressure sensors, 4017A and 4012A pressure sensors, K-Beam and K-Shear accelerometers and KiTorq 4552A torque flanges, based on the measured quantity, the range and the complete sensor code.

Headquarters: Winterthur, Switzerland

Request a quote

Who is Kistler and what does it make?

Kistler is a Swiss group headquartered in Winterthur, with more than 60 years of experience in the dynamic measurement of pressure, force, torque and acceleration. The central element of its systems is the piezoelectric sensor, complemented by piezoresistive and capacitive MEMS sensors, charge amplifiers, data acquisition systems and software. The company develops and manufactures solutions for product development, testing and process control, from the test bench to the production line.

Specifically, the range includes KiTorq family torque measuring flanges, with ranges between 50 and 10,000 Nm; ø6 mm cavity pressure sensors for 200 bar, used in moulds and injection; miniature absolute pressure sensors with M5 thread, from 0–5 to 0–50 bar; pressure sensors for hydrogen applications; IEPE and capacitive K-Beam accelerometers for low frequency vibration; and ring force sensors, from a few kN up to 1,200 kN.

These instruments appear in Romania as laboratory and testing equipment at machine builders, in the development of pumps, compressors and transmissions, in plastic moulding and injection installations and on the test benches of automotive suppliers. Because the series and the configuration of cables, amplifiers and connectors directly influence the measurement, a correct quotation starts from the complete sensor code or from the measured quantity and its range.

What do we supply from the Kistler range?

ProductDescription
KiTorq — torque measuring flanges (4552A)System with a rotor flange and a stator evaluation instrument for torques between 50 and 10,000 Nm, with variants with fieldbus and Ethernet interfaces, used on test benches for motors, transmissions and pumps.
Cavity pressure sensors (6172B)Direct measuring sensors with a diameter of 6 mm and a range of 200 bar, in coated and uncoated variants, for tracking pressure in the mould during plastic injection and casting.
4017A and 4012A absolute pressure sensorsMiniature sensors with M5 thread for 0–5 to 0–50 bar (4017A) and sensors for hydrogen applications, with M14x1.25 or M12x1 thread, for 0–20 to 0–50 bar (4012A).
KiVibe, K-Shear and K-Beam accelerometersKiVibe miniature triaxial IEPE accelerometers, K-Shear general purpose accelerometers from 25 to 500 g and K-Beam capacitive MEMS accelerometers from 2 to 200 g for low frequencies, for vibration testing and monitoring.

Why Kistler?

  • Specialisation in dynamic measurement — piezoelectric sensors capture rapid variations in pressure, force and acceleration, where ordinary sensors fall behind
  • KiTorq torque measuring flanges between 50 and 10,000 Nm — mounted directly between motor and load, for test benches of transmissions and drives
  • ø6 mm cavity pressure sensors at 200 bar — they measure directly in the mould, with a coated HighSens variant
  • Coverage of four measured quantities — pressure, force, torque and acceleration, plus compatible amplifiers and data acquisition
  • Variants for special conditions — pressure sensors for hydrogen, cryogenic accelerometers and PiezoStar high temperature accelerometers

Which Kistler codes and series are requested most often?

CodeDescription
4552AKiTorq torque measuring flange, 50 to 10,000 Nm
4503BShaft torque sensor, dual range, 0.2 Nm to 5 kNm
KiTorq RotorRotor of the torque flange system, 50–5,000 and 100–10,000 Nm
KiTorq StatorEvaluation instrument for the torque flange, with fieldbus and Ethernet
Mini-SmartShaft torque sensors, 0.5 Nm to 1 kNm
4017AMiniature absolute pressure sensor M5, 0–5 to 0–50 bar
4012AAbsolute pressure sensor for hydrogen, 0–20 to 0–50 bar
6172BCavity pressure sensor ø6 mm, 200 bar
KiVibe MiniatureMiniature triaxial IEPE accelerometers with PiezoStar crystal
K-ShearGeneral purpose accelerometers, 25 to 500 g
K-Beam 8316A / 8396ACapacitive MEMS accelerometers for low frequencies, 2 to 200 g
SlimLinePiezoelectric ring force sensors, up to 80 kN

Where is Kistler equipment used?

  • Test benches for motors, transmissions and pumps — torque and dynamic pressure
  • Plastic injection and moulding — cavity pressure on every cycle
  • Automotive development and mobility — acceleration, clamping force and pressure
  • Energy and hydrogen — pressure sensors for hydrogen installations
  • Research laboratories and mechanical testing — force, vibration and shock

How do we supply Kistler in Romania?

From the Kistler range we can quote pressure sensors, accelerometers, force sensors, torque sensors and flanges and their accessories, brought in on order. The lead time is usually 1–4 weeks on order and may be longer for configured systems, such as torque flanges with evaluation electronics. For a correct quotation, send us the complete sensor code or, if you are replacing one, the measured quantity, the range, the thread or mechanical interface, the output type (charge, IEPE or voltage), the cable length and the working temperature.

Whether a piezoelectric sensor suits a slow or static process is decided once we have the application data, and configurations with evaluation electronics are confirmed individually.

Frequently asked questions about Kistler

What does Kistler make and what are its sensors used for?

Kistler makes sensors and systems for the dynamic measurement of pressure, force, torque and acceleration, based mainly on piezoelectric technology, together with amplifiers, data acquisition and software. They are used in product development, in testing and in monitoring injection, assembly and machining processes.

How do I choose between a piezoelectric and a piezoresistive pressure sensor?

Piezoelectric sensors suit rapid pressure variations, such as those in moulds, engines or pumps, and piezoresistive ones suit slow or static pressures, in difficult environments. Send us the pressure profile over time, the range and the temperature of the medium, and we propose the suitable category.

Can you supply Kistler sensors in Romania, and how quickly?

Kistler sensors are ordered through us and reach Romania usually in 1–4 weeks. For configured systems, such as torque flanges with evaluation electronics, the lead time may be longer. You receive the exact confirmation in the quotation, once we have established the sensor code and the accessories.

I have a Kistler sensor with an old code; can a replacement be checked?

It can be checked starting from the complete code on the sensor or on the cable, the measured quantity, the range, the mounting thread or flange and the output type. We confirm that a new model fits only with these data, especially when the amplifier or the cable stay as they are.

What data do I send for a quotation on torque or pressure sensors?

For torque: the range in Nm, the maximum speed, the mounting interface and the output type. For pressure: the range in bar, the thread or mounting size, the medium, the temperature and the output type. Add the cable length and the amplifier used, so that we can propose a complete set.

How do I request a Kistler quotation?

Send the Kistler code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Kistler Group (manufacturer documentation)