Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

KRAL AG supplier in Romania

Screw pumps for fuels and industrial oils

Headquarters: Lustenau, Austria

Request a quote

Who is KRAL AG and what does it make?

KRAL AG is an Austrian manufacturer of screw pumps and volumetric flowmeters, based in Lustenau, close to the borders with Switzerland and Germany. The core range covers three-screw pumps for fuels and industrial oils, plus flowmeters for the precise measurement of liquids in marine and industrial applications. For the Romanian market we can quote KRAL pumps and flowmeters based on the flow rate and pressure required by the project.

Technically, the K series covers flow rates from 5 to 2,900 l/min, with a maximum pressure of 16 bar and a viscosity range from 1.1 to 10,000 mm²/s, at temperatures from -20°C to 180°C (up to 300°C with a magnetic coupling). The more compact L series covers higher pressures — up to 63 bar — at flow rates of 5–160 l/min, for applications where mounting space is limited but the required discharge pressure is high.

In commercial marine, energy and mechanical engineering, KRAL pumps provide a low-pulsation solution for fuel and oil transfer, and the flowmeters complete the installation where the accuracy of consumption measurement matters for the equipment's energy balance.

What do we supply from the KRAL AG range?

ProductDescription
Screw Pumps — K SeriesThree-screw pumps with a ductile iron EN-GJS-400 casing and nitrided steel screws, flow rate from 5 to 2,900 l/min at 1,450 rpm, maximum pressure 16 bar, working temperatures between -20°C and 180°C (300°C with a magnetic coupling). Self-priming, with minimal pulsation at discharge, suited to the transfer of fuels and industrial oils. Sealed, lifetime-lubricated external bearings reduce the frequency of maintenance interventions.
Screw Pumps — L SeriesA line of compact medium-to-high pressure pumps, with flow rates of 5–160 l/min at 1,450 rpm and a maximum pressure of 63 bar, available in LFI/LFT (horizontal mounting) and LVI/LVT (vertical mounting) versions. The rotating parts are pre-assembled in a removable cover, which simplifies service work. Typical application: hydraulic and lubrication systems with higher pressure than the K series, but in tighter mounting spaces.
KRAL Volumetric FlowmetersFlowmeters with a screw measuring principle, for the precise determination of the flow of fuel, oil or other viscous liquids, complemented by display and signal processing units. Used for consumption balance on marine engines, generators and industrial installations where monitoring consumption justifies the investment in a dedicated volumetric flowmeter.

Why KRAL AG?

  • Three-screw pumps with pulsation-free operation, suited to engine feed and lubrication systems
  • High-pressure L series (up to 63 bar) in a compact format for limited mounting space
  • Marine approvals as per the manufacturer's documentation, for marine applications
  • Volumetric flowmeters for the precise measurement of fuel and oil consumption

Which KRAL AG codes and series are requested most often?

CodeDescription
K SeriesScrew pump, 5–2,900 l/min, 16 bar
L Series LFICompact screw pump, horizontal mounting, up to 63 bar
L Series LFTCompact screw pump, horizontal mounting variant
L Series LVICompact screw pump, vertical mounting
L Series LVTCompact screw pump, vertical mounting variant
C SeriesScrew pump, 5–3,550 l/min, 70 or 100 bar
Screw Pumps Magnetic CouplingFamily of screw pumps sealed by a magnetic coupling
KRAL FlowmetersVolumetric flowmeters for viscous liquids
Display and Processing UnitFlowmeter display and signal processing unit
Smart Support SoftwareSupport software for pump selection and maintenance

Where is KRAL AG equipment used?

  • Commercial marine — engine feed and fuel consumption measurement
  • Energy — fuel and lubricating oil pumping in power plants
  • Oil and gas — transfer of viscous petroleum products
  • Chemicals — pumping industrial fluids of variable viscosity
  • Mechanical engineering — medium-to-high pressure hydraulic systems

How do we supply KRAL AG in Romania?

For KRAL pumps and flowmeters we use the manufacturer's technical documentation to describe the series and we confirm the exact parameters on the data sheet of the model the customer requests. We bring in the equipment to order, typically in 1–4 weeks, depending on the model and configuration (magnetic or mechanical coupling). For a quotation, we need the required flow rate, the discharge pressure, the fluid viscosity and the working temperature. Installation of the equipment is outside our offer; marine classification certificates are confirmed from the documentation specific to the order.

Marine classification certificates (ABS, DNV, GL) for a specific model are confirmed from the manufacturer's order documentation.

Frequently asked questions about KRAL AG

What does KRAL AG make?

KRAL AG makes three-screw pumps for fuels and industrial oils, in the K and L series, plus volumetric flowmeters for the precise measurement of viscous liquids. They are used mainly in commercial marine, energy and medium-to-high pressure hydraulic installations.

How do I choose between the K series and the L series of screw pumps?

The K series covers higher flow rates, up to 2,900 l/min, at a maximum pressure of 16 bar; the L series is more compact and covers higher pressures, up to 63 bar, at flow rates of 5–160 l/min. The choice depends on the required discharge pressure and the available mounting space.

What do I need to send for a KRAL AG pump quotation?

The required flow rate in l/min, the discharge pressure required, the fluid viscosity at working temperature and the preferred coupling type (mechanical or magnetic). With this data we check the suitable model from the K or L range.

Do you supply KRAL AG pumps in Romania and how long does it take?

Yes, we bring in KRAL AG pumps to order, typically in 1–4 weeks, depending on the exact configuration confirmed by the manufacturer for the model requested.

How do I request a KRAL AG quotation?

Send the KRAL AG code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: KRAL AG (manufacturer documentation)