JOLA supplier in Romania
For JOLA we quote SSP, SM, SMR and MK float switches, TSR and NTR immersion probes, TSQ and NSQ level transmitters, Leckstar and Leckmaster leak detectors and RK limit switches; items are identified by type.
Founded in 1952 · Headquarters: Lambrecht, Germany
Who is JOLA and what does it make?
JOLA (Jola Spezialschalter) is a German maker of devices for level measurement, leak detection and limit switches, based in Lambrecht, Germany, and active since 1952. The devices are used to monitor liquids in tanks, to protect pumps and to signal leaks.
For level measurement, the range covers both limit level detection, used for pump control, overflow protection or dry-run protection, and continuous measurement, with the fill level shown in percent or in volume units. The families include float switches and reed-contact switches (SSP, SM, SMR, MK), immersion probes (TSR, NTR, including Ex versions with intrinsically safe "ia" and flameproof "d" protection on the TSR), continuous level transmitters (TSQ, NSQ for small tanks, NSQL for large tanks), electrode controls, alarm relays and level controllers with magnetic switches.
For leak detection, JOLA makes Leckstar conductive detectors, Leckmaster capacitive detectors, the Localizer 255/2 leak-locating relay, the Leckwatcher, Liqui-Switch and L-Pointer devices, the LWR conductivity relay and condensation sensors. The limit switch range includes the RK limit switch and the MBK magnetic switch. For a quotation, the device type, the liquid, the tank or pipe and the supply voltage matter. These are devices with a safety role in the installation: a float switch stops a pump before the tank empties, an immersion probe signals overflow, and a leak detector reports liquid that has appeared in a sump or under a tank, before it reaches the ground or the surrounding equipment. For replacing an existing device, the type and number on the nameplate are the starting point.
What do we supply from the JOLA range?
| Product | Description |
|---|---|
| Float switches and immersion probes | SSP, SM, SMR and MK float switches, TSR and NTR immersion probes (and Ex versions), electrodes and electrode controls. They are used for pump control, overflow protection and dry-run protection. |
| TSQ, NSQ and NSQL continuous level transmitters | Level transmitters for continuous indication of the fill level: TSQ, NSQ for small tanks and NSQL for large tanks. The value is transmitted in percent or in volume units to the installation control. |
| Leckstar and Leckmaster leak detectors | Leckstar works conductively, Leckmaster capacitively, both also in Ex versions. Localizer 255/2 with linear sensors indicates the location of the leak, and the LWR relay, condensation sensors and Leckwatcher devices complete the range. |
| Limit switches and magnetic switches | The RK limit switch and the MBK magnetic switch transmit an electrical, hydraulic, pneumatic or mechanical signal. They are used to limit travel on machines and installations. |
Why JOLA?
- Limit level detection and continuous measurement in the same range — one range for the overflow alarm and for fill level indication
- Ex versions of the TSR probes, intrinsically safe "ia" or flameproof "d" — for sites with explosion hazard
- Conductive (Leckstar) and capacitive (Leckmaster) leak detection — the principle is chosen by liquid and installation location
- Devices for liquids that can pollute water, used on tanks and pipes — for installations with environmental protection requirements
- Mounting with dedicated brackets and accessories, including for Ex devices — the item is completed without improvised adaptations
Which JOLA codes and series are requested most often?
| Code | Description |
|---|---|
| SSP | Float switch with reed contact actuated by a magnetic weight |
| SM | Float switch |
| SMR | Float switch |
| MK | Float switch |
| TSR | Immersion probe, including Ex versions |
| NTR | Immersion probe, including Ex versions |
| TSQ | Transmitter for continuous level measurement |
| NSQ | Level transmitter for small tanks |
| NSQL | Level transmitter for large tanks |
| Leckstar | Conductive leak detector |
| Leckmaster | Capacitive leak detector |
| Localizer 255/2 | Electrode relay with leak location, with linear sensors |
| LWR | Conductivity relay |
| RK | Limit switch |
| MBK | Magnetic switch |
Where is JOLA equipment used?
- Tanks and basins — limit level alarm and overflow protection with float switches
- Pumping stations — pump control and dry-run protection with immersion probes
- Tanks for liquids that can pollute water — conductive or capacitive leak detectors
- Ex sites — TSR probes and leak detectors in Ex versions
- Machines and installations — RK limit switches and MBK magnetic switches
How do we supply JOLA in Romania?
We can quote JOLA devices for level, leak detection and limit switches, as well as replacements for those in service. For an accurate quotation, send the type and number on the device nameplate (for example TSR, SM or Leckstar), the liquid and temperature, the type of tank or pipe, the supply voltage and, if applicable, the Ex version requirement. We bring items in to order, usually in 1–4 weeks; for special or Ex versions the lead time may be longer. A JOLA device can ship in 24–72 h when the item is in stock, locally or at the supplier. The exact lead time is confirmed in the quotation.
For an Ex device or for a liquid with special properties, we confirm the exact type in the quotation according to the technical data sheet of the installation that you send.
Frequently asked questions about JOLA
What are the SSP, TSQ and Leckstar series in the JOLA range?
SSP is a float switch with reed contact, TSQ a transmitter for continuous level measurement, and Leckstar a leak detector. JOLA makes devices for measuring the level of liquids (float switches, immersion probes, continuous transmitters), conductive and capacitive leak detectors, and limit switches. The company is based in Lambrecht, Germany, and has been active since 1952.
How do I choose between conductive and capacitive leak detection?
Leckstar works conductively, that is, it detects liquid that closes a circuit between electrodes, while Leckmaster works capacitively. The choice depends on the liquid and the installation location. Send the liquid, the location and the supply voltage, and we check the suitable type.
Do you supply JOLA devices in Romania, and how quickly?
Yes. JOLA devices are brought in to order, usually in 1–4 weeks. A device can ship in 24–72 h when the item is in stock, locally or at the supplier. Depending on the type and specification, the lead time may be longer and is confirmed in the quotation.
Can I replace an installed JOLA device with the same type?
Usually yes, if we identify it. We need the type and number on the nameplate (for example TSR, NSQ or LWR), the liquid measured, the supply voltage and the length of the probe or float. We check the current version and the mounting accessories before the quotation.
What information do you need for a TSQ, NSQ or NSQL level transmitter?
The type of tank (small or large, for the choice between NSQ and NSQL), the liquid, the height to be measured, the temperature, the output signal wanted and, if applicable, the Ex version. For limit level, add the function required: overflow alarm or dry-run protection.
How do I request a JOLA quotation?
Send the JOLA code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Jola Spezialschalter (manufacturer documentation)

