Kummert supplier in Romania
For Kummert we quote the Profi NG unit with proTab or easyTab, the K-50 HD, K-70 HD and CamFlex HD cameras, the F-200 HD crawler and HD reels; we need the type and serial number of the device and the pipe diameters.
Founded in 1988 · Headquarters: Gerolzhofen, Germany
Who is Kummert and what does it make?
Kummert is a German manufacturer of video inspection systems for sewers and drain pipes, based in Gerolzhofen. The company has existed since 1988, has dealt only with inspection systems since 1994, and has worked on pipe inspection since 2001. The range includes mobile base units, push cameras, self-propelled crawlers with camera, cable reels, the PushBuddy feed device and the can3D and Record inspection programs. For a quotation, send us the type of the base unit and of the camera, from the nameplate, and the diameters of the pipes you inspect.
The current base unit, Profi NG, battery-powered, is the base for the proTab and easyTab control tablets and works with all the reels and cameras of the HD generation. It has a motor-rotated measuring laser, a metre counter in the rear wheel and room for two reels or one cable reel. proTab runs the can3D NG program, which automatically draws the pipe network in 3D and generates the reports, and easyTab uses the Record program, with configurable defect catalogues and a report on a memory stick immediately after inspection. For simple jobs there is also the Easy HD unit, supplied with the K-28 HD and K-50 HD cameras.
The push cameras cover diameters from DN50: K-35 HD from DN50, K-50 HD from DN70, K-60 HD, with a rotating and tilting head, from DN80, and K-70 HD from DN100 to DN300, with continuous rotation, tilting of ±135° and two laser diodes for measuring the diameter and the width of cracks. CamFlex HD keeps the image always upright, in 1:1 format. For large sewers, the F-200 HD crawler works between DN200 and DN800, with four EC motors and continuous slope measurement, and works with the KR-200 HD or KR-300 HD automatic reel, with a 200 or 300 m Kevlar-reinforced cable. The SI-250 camera inspects manholes with a 250° field of view. Profi 3, Profi 3+ and Profi 4 are the generations preceding the Profi NG unit.
What do we supply from the Kummert range?
| Product | Description |
|---|---|
| Profi NG and Easy HD base units | Profi NG is the mobile battery unit, with IP54 protection and about 3.5 hours of operation, with a motor-rotated measuring laser and a metre counter in the wheel, controlled from proTab or easyTab. Easy HD comes equipped with the K-28 HD and K-50 HD cameras and a simple program, for quick inspections. |
| K-28 HD, K-35 HD, K-50 HD, K-60 HD, K-70 HD, CamFlex HD push cameras | HD cameras with a 1:1 format image and sensors for the pipe route. The K-28 HD passes through several 87° bends, the K-35 HD works from DN50, the K-50 HD from DN70, the K-60 HD rotating-tilting from DN80, and the K-70 HD between DN100 and DN300, with measuring laser diodes. |
| F-200 HD crawler and KR-200 HD / KR-300 HD reels | The F-200 HD inspects pipes from DN200 to DN800, with a lifting arm adjusted automatically to the diameter, four EC motors, anti-tip protection and continuous slope measurement. The KR-200 HD or KR-300 HD reel automatically unwinds 200 or 300 m of Kevlar-reinforced cable and counts the metres. |
| HD reels, PushBuddy and the SI-250 manhole camera | The HD-S and HD-M reels have 50 m, the HD-L 60 m, and the HD-XL 75 or 100 m of push cable. PushBuddy, for DN100–DN300, takes over the cable feed and is controlled wirelessly from the tablet. The SI-250 inspects manholes with a 250° field of view and ToF sensors for point clouds. |
Why Kummert?
- Profi NG with proTab or easyTab — the same base unit works with all the cameras and reels of the HD generation
- Cameras from DN50 (K-35 HD) to DN300 (K-70 HD) — a single family from small connections to DN300 pipes
- K-70 HD with two laser diodes — the pipe diameter and the width of cracks are measured during the inspection
- F-200 HD crawler for DN200–DN800, with an automatic reel of 200 or 300 m — inspection of large sewers without manual pushing
- The can3D NG program draws the network in 3D — the pipe plan and the report come directly from the inspection
Which Kummert codes and series are requested most often?
| Code | Description |
|---|---|
| Profi NG | Mobile battery base unit, with measuring laser and metre counter |
| proTab | 13 inch control tablet with can3D NG program, laser and LED |
| easyTab | 12.3 inch control tablet with Record program |
| Easy HD | Simple base unit, supplied with the K-28 HD and K-50 HD cameras |
| K-28 HD | Small push camera, for pipes with several 87° bends |
| K-35 HD | 35 mm axial camera, from DN50, with locating transmitter |
| K-50 HD | Axial camera for pipes from DN70 |
| K-60 HD | Rotating-tilting camera for pipes from DN80 |
| K-70 HD | Rotating-tilting camera DN100–DN300 with measuring laser diodes |
| CamFlex HD | Camera with always-upright HD image, 1:1 format |
| F-200 HD | Self-propelled crawler with camera for DN200–DN800 |
| KR-200 HD / KR-300 HD | Automatic reel with 200 / 300 m of Kevlar-reinforced cable |
| HD-S / HD-M / HD-L / HD-XL | Push reels of 50, 50, 60 and 75/100 m |
| PushBuddy | Cable feed and clamping device for DN100–DN300 |
| SI-250 | Camera for manhole inspection, 250° field of view |
Where is Kummert equipment used?
- Water and sewer operators — inspection of sewers and sewer connections
- Drain cleaning and sewer rehabilitation companies — inspections before and after the work
- Construction and installations — acceptance of new sewer and drain networks
- Industrial sites — inspection of on-site drain pipes
- Building managers — documenting the condition of internal sewer installations
How do we supply Kummert in Romania?
We quote Kummert inspection systems complete or by component: the Profi NG unit with proTab or easyTab, the K-35 HD, K-50 HD, K-60 HD, K-70 HD and CamFlex HD cameras, the F-200 HD crawler, the HD and KR-200/300 HD reels, PushBuddy and accessories such as cables and spare reels. For a correct quotation, send us the type and serial number of the base unit and of the camera, the cable length and the pipe diameters. We supply the equipment to order, usually 1–4 weeks; depending on the specification, the lead time may be longer. The exact lead time is confirmed in the quotation.
For units of the Profi 3, Profi 3+ and Profi 4 generations we check case by case, by serial number, which accessories can still be procured, and for new systems we quote the equipment of the current HD generation.
Frequently asked questions about Kummert
What does Kummert make?
Kummert makes in Germany mobile video inspection systems for sewers and drain pipes: the Profi NG base unit with the proTab and easyTab tablets, the Easy HD unit, push cameras from DN50, the F-200 HD crawler for DN200–DN800, cable reels, the PushBuddy device, the SI-250 manhole camera and the can3D and Record programs.
Which Kummert camera should I choose for our pipe diameters?
For connections from DN50 the K-35 HD suits, for DN70 upwards the K-50 HD, and for many 87° bends the K-28 HD. Where a sideways view is needed, the K-60 HD (from DN80) or K-70 HD (DN100–DN300) have a rotating-tilting head. For pipes between DN200 and DN800 there is the F-200 HD crawler.
Do you supply Kummert equipment in Romania and how fast?
Yes. We supply Kummert systems and accessories to order, usually in 1–4 weeks. A complete system with a crawler and an automatic reel, depending on the specification, may have a longer lead time. An accessory can ship in 24–72 h when the item is in stock, locally or at the supplier; we confirm the lead time in the quotation.
We have a Profi 3 or Profi 4 system. What can we buy for it?
Profi 3, Profi 3+ and Profi 4 are generations preceding the Profi NG unit. Send us the type and serial number of the unit, the camera and the reel, and we check which accessories can still be procured. If moving to the HD generation is the safer route, we quote the Profi NG unit or the HD cameras suited to your diameters.
What data do I send for a quotation on a Kummert inspection system?
The minimum and maximum pipe diameters, the length of the sections (to choose the 50, 60, 75 or 100 m reel or the 200 or 300 m KR reel), the number of bends, whether you also inspect manholes, which reporting program you prefer (can3D or Record) and, for replacements, the type and serial number of the existing device.
How do I request a Kummert quotation?
Send the Kummert code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Kummert GmbH (manufacturer documentation)

