Lloyd Instruments supplier in Romania
For Lloyd Instruments we quote the LS universal machines up to 5 kN and LD up to 100 kN, the FT1 friction tester, XLC, YLC and OLC load cells, extensometers and the NEXYGENPlus software, depending on the maximum force and the test standard.
Headquarters: Bognor Regis, United Kingdom
Who is Lloyd Instruments and what does it make?
Lloyd Instruments is a British manufacturer based in Bognor Regis, West Sussex, of universal materials testing machines, used to determine tensile strength, compression, bending, shear, tear and friction. The programme runs from single-column benchtop machines to two-column machines for forces of up to 100 kN and includes accessories, extensometers and the NEXYGENPlus control and analysis software. The tests follow standardised methods, for example ISO 527 and ASTM D638 for the tensile testing of plastics or ISO 178 for bending.
The single-column LS series works up to 5 kN, with an accuracy of ±0.5% of the reading down to 1% of the load cell capacity, linear guides and its own console with a screen, usable on its own or together with NEXYGENPlus. The two-column LD series, mounted on a bench, goes up to 100 kN, with a sampling frequency of 1000 Hz and strain rate control that exceeds the ISO 527 requirements. FT1 is the friction tester for static and kinetic coefficients, according to ASTM D1894, ISO 8295 and TAPPI T549. For force there are XLC and YLC S-beam load cells of up to 10 kN and OLC flat load cells of up to 100 kN. The extensometers are contacting, long-travel, deflection or video (VE1), and the thermal cabinets cover −70 to 300 °C.
Such machines appear in the laboratories of manufacturers of plastic and rubber parts, in quality control for packaging, in building materials and electronics laboratories and in research institutes. The choice depends on the maximum force, the type of specimen, the test standard and the accessories needed, which is why the quotation starts from the list of tests and the capacity required.
What do we supply from the Lloyd Instruments range?
| Product | Description |
|---|---|
| LS series | Single-column testing machines, up to 5 kN, for quality control, education and research and development, with linear guides, an integrated console with a backlit screen and an accuracy of ±0.5% of the reading down to 1% of the load cell capacity. |
| LD series | Two-column universal machines, bench-mounted, up to 100 kN, in standard and extended models, with sampling at 1000 Hz, precise strain rate control and thousands of interchangeable grips and fixtures, for simple or multi-stage tests. |
| FT1 and load cells | The FT1 friction tester measures static and kinetic coefficients on ASTM and ISO methods; the XLC and YLC (S-beam, up to 10 kN) and OLC (flat, up to 100 kN) cells complete the LS and LD series. |
| Extensometers, thermal cabinets and NEXYGENPlus | Contacting, long-travel, deflection or VE1 video extensometers, thermal cabinets from −70 to 300 °C, shields for fragile specimens and the NEXYGENPlus software for control and analysis. |
Why Lloyd Instruments?
- Two families of universal machines — single-column LS up to 5 kN and two-column LD up to 100 kN, with the same control logic
- Strain rate control beyond the ISO 527 requirements — the LD series suits plastics, where the speed determines the result
- Load cells with stated accuracy — XLC and YLC up to 10 kN, OLC up to 100 kN, with ±0.5% from 1% to 100% of capacity
- Extensometers for every specimen — contacting, long-travel, deflection or VE1 video, for rigid, ductile or high-elongation materials
- Configurable software for multi-stage tests — NEXYGENPlus covers both standardised methods and tests on parts and components
Which Lloyd Instruments codes and series are requested most often?
| Code | Description |
|---|---|
| LS Series | Single-column universal machine, up to 5 kN |
| LD Series | Two-column universal machine, up to 100 kN |
| FT1 | Friction tester, static and kinetic coefficients |
| XLC | S-beam load cell, up to 10 kN |
| YLC | S-beam load cell with anti-rotation collar |
| OLC | Flat load cell, up to 100 kN |
| VE1 | Video extensometer with optical measurement |
| NEXYGENPlus | Control and analysis software for tests |
| Long Travel Extensometer | Long-travel extensometer, for large elongations |
| Contacting Extensometer | Contacting extensometer, specimens up to 25 mm |
| Deflection Gauge Extensometer | Deflection extensometer for bending |
| Thermal Cabinet | Thermal cabinet between −70 and 300 °C |
| Splinter Shield | Protective shield for fragile specimens |
| POGO frame | Frame for very large specimens, below the machine base |
Where is Lloyd Instruments equipment used?
- Plastics and rubber — tensile, bending and compression on ISO and ASTM standards
- Packaging — seal strength, tear, puncture and friction of films and cartons
- Building materials — tests on products and components with machines up to 100 kN
- Electronics and components — pull-out and grip forces on connectors and small parts
- Research and education — benchtop LS machines for the laboratory
How do we supply Lloyd Instruments in Romania?
We can quote Lloyd Instruments universal testing machines, load cells, extensometers, thermal cabinets and gripping accessories, supplied to order. The lead time is usually 1–4 weeks and, depending on the specification, can be longer for configurations with a thermal cabinet or special extensometers. For a quotation send us the type of materials, the maximum force required, the test standard (for example ISO 527 or ASTM D638), the specimen dimensions, the working temperature and whether you already have grips or an analysis software. The exact lead time is confirmed in the quotation.
The machine series and the load cell are decided only after the estimated maximum force, the specimen type and the test standard are known.
Frequently asked questions about Lloyd Instruments
What does Lloyd Instruments make?
Lloyd Instruments, from Bognor Regis, makes universal materials testing machines, single-column (LS series, up to 5 kN) and two-column (LD series, up to 100 kN), plus load cells, extensometers, thermal cabinets and the NEXYGENPlus software. The machines determine tensile, compression, bending and friction.
How do I choose between the LS series and the LD series?
The single-column LS series covers forces of up to 5 kN, that is plastics, films, small components and electronics. The two-column LD series, with a rigid base, goes up to 100 kN, for large materials or high forces. Send us the maximum force and the specimen size so that we can recommend the suitable machine.
How fast do you bring a Lloyd Instruments machine to Romania?
The machines are supplied to order, usually in 1–4 weeks; depending on the specification, the lead time can be longer, especially with a thermal cabinet or special extensometers. The exact lead time is confirmed in the quotation.
What do you check if I want to replace an older load cell or machine?
We check the model and series of the machine, the load cell capacity, the connector type and the control software version. The XLC and YLC cells suit the LS series, and OLC the LD series, but compatibility is confirmed only after comparing the data on the machine nameplate.
What do I need to send for a quotation for a tensile testing machine?
Send the specimen material, the estimated maximum force, the test standard, the specimen dimensions, the need for an extensometer or a thermal cabinet and the number of tests per day. If you already have grips, state their model so that we check compatibility.
How do I request a Lloyd Instruments quotation?
Send the Lloyd Instruments code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Lloyd Instruments (manufacturer documentation)

