Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

LEMO supplier in Romania

For LEMO we quote push-pull circular connectors from the B, K, S, E, T, M, F and D series, single-contact high-voltage connectors and cable assemblies; we need the full code, the number of contacts and the protection rating.

Founded in 1946

Request a quote

Who is LEMO and what does it make?

LEMO makes circular connectors with push-pull coupling, locked by simply pulling or pushing the sleeve, and cable assemblies adapted to customer requirements. The brand is Swiss, and the range covers metal and plastic connectors for signal, power, high-speed data and optical fibre. More than 90,000 configurable combinations can be assembled, and the brand has existed since 1946.

The ORIGINALS series are configurable: B for indoor use, with key coding, K for outdoor use, S with a stepped, crescent-shaped insert for ergonomic coupling, E for outdoor use and T, the miniature outdoor version. The OPTIMA series are lighter and vibration-resistant: M with latch and screw locking, F and D, the latter miniature. For severe conditions there are the SUPREME series, including W for underwater use and Y, single-pole for high voltage.

The speciality range includes the 3K.93C.Y hybrid optical fibre connector, used in high-definition television, and the 00 series in the NIM-CAMAC standard, with 50 Ω impedance. Protection ratings reach IP68 on the M and D series and IP67 on the F series. The miniature connectors in the range are also offered with 50 Ω impedance. For a quotation, send the full code from the connector.

What do we supply from the LEMO range?

ProductDescription
ORIGINALS series B, K, S, E, TConfigurable push-pull connectors, with key coding or stepped insert. B is for indoor use, K for outdoor use, S has a stepped insert, E is the outdoor version with stepped insert, and T is the miniature outdoor version.
OPTIMA series M, F, DLight, vibration-resistant connectors. The M series locks with latch and screw, F is a robust push-pull and D is a miniature push-pull. Protection ratings reach IP67 or IP68, depending on the series.
SUPREME series W and YW is an underwater connector, with screw locking at high pressure, and Y is a single-pole connector for high voltage. They are chosen for conditions in which ordinary connectors do not hold up.
Special series 00 and 3K.93C.YThe 00 series is the push-pull connector in the NIM-CAMAC standard, used in laboratory instrumentation. The 3K.93C.Y is the hybrid optical fibre connector conforming to SMPTE 304, for high-definition television.

Why LEMO?

  • Push-pull coupling — the connector closes and opens in a single movement, useful for frequent mating
  • Series for indoor and outdoor use (B, K, S, E, T) — the version is chosen by the mounting environment
  • Protection rating up to IP68 on the M and D series — for dusty environments or water splashes
  • Single-pole Y series for high voltage — solves cases where a single contact must be strongly insulated
  • Cable assemblies adapted to customer requirements — connector and cable come together, ready to fit

Which LEMO codes and series are requested most often?

CodeDescription
BORIGINALS series for indoor use, with key coding
KORIGINALS series for outdoor use, with key coding
SORIGINALS series with stepped insert, for indoor use
EORIGINALS outdoor series, with stepped insert
TORIGINALS miniature series, for outdoor use
MOPTIMA series with latch and screw locking, IP68
FOPTIMA robust push-pull series, IP67
DOPTIMA miniature push-pull series, IP68
WSUPREME series for underwater use
YSUPREME single-pole series for high voltage
00Push-pull connector in the NIM-CAMAC standard
3K.93C.YHybrid optical fibre connector, SMPTE 304 standard

Where is LEMO equipment used?

  • Measuring and test equipment — push-pull connectors for cables that are mated often
  • Laboratory instrumentation — series in the NIM-CAMAC standard
  • Professional audio-video equipment — hybrid optical fibre connector
  • Dusty and humid environments — series with IP67 or IP68 protection
  • Underwater technology — W series with high-pressure locking

How do we supply LEMO in Romania?

We can quote LEMO connectors from the B, K, S, E, T, M, F and D series, the special 00 and Y series, as well as cable assemblies. For an accurate request we need the full code from the connector, for example the series, the size and the number of contacts, the cable type and the protection rating required. If you are replacing an existing connector, also send a photo of the mating connector. We supply to order, usually in 1–4 weeks; depending on the specification, the lead time may be longer and is confirmed in the quotation.

Series with special coding and cable assemblies are defined from the full code, which is why we reply with a quotation once we receive this information.

Frequently asked questions about LEMO

What does LEMO make and what does push-pull mean?

LEMO makes metal and plastic circular connectors, cable assemblies and optical fibre connectors. Push-pull means that the sleeve is pulled to open and pushed to close, without a thread. The series are grouped into ORIGINALS, OPTIMA, SUPREME and special series, with more than 90,000 configurable combinations.

How do I choose between the B, K, S, E and T series?

B and S are for indoor use, K and E for outdoor use, and T is the miniature outdoor version. S and E have a stepped insert. If you already have a connector, send the code from the body or a photo, and we check the series and the matching size before the quotation.

Can you supply LEMO connectors in Romania and how fast?

LEMO connectors are supplied to order in Romania, usually in 1–4 weeks. They can ship in 24–72 h when the item is in stock, locally or at the supplier. Specially configured combinations may need more, and the date is confirmed in the quotation.

Can I replace an old push-pull connector with a current series?

Yes, once we compare the series, the body size, the number of contacts and the type of coding. These data are found on the existing connector or on the cable. With them we determine whether the two parts mate. Send photos of both ends and we reply with the suitable version in the quotation.

What data do I need to send for a LEMO cable assembly?

Send the connector series at each end, the number of contacts, the length, the cable type and the working environment. If one end is left free, tell us the conductor cross-section. For optical fibre or coaxial cables, also add the type of signal transmitted.

How do I request a LEMO quotation?

Send the LEMO code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: LEMO SA (manufacturer documentation)