Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

MÄDLER supplier in Romania

For MÄDLER we quote spur and bevel gears, racks, worm wheels with worms, sprockets, splined shafts and hubs and threaded spindles with nuts; the item is identified by code, by drawing or by sample.

Founded in 1882 · Headquarters: Stuttgart, Germany

Request a quote

Who is MÄDLER and what does it make?

MÄDLER is based in Stuttgart and has been active since 1882. It makes mechanical transmission elements: gears, racks, sprockets and threaded spindles for machinery, conveyor lines and positioning mechanisms. In-house production takes place in the workshops in Stuttgart and Hamburg, on numerically controlled machine tools, with skilled workers.

In-house production includes spur gears with straight teeth, bevel gears, worm wheels with their worms, racks, sprockets, splined shafts with splined hubs and clamping rings, trapezoidal threaded spindles and their nuts, as well as ball screw assemblies made to the customer's specification. Precision spur gears are made of hardened and ground steel, in modules from 1 to 3.

An important part of the range is made in in-house workshops. Production to order, from the customer's drawings or specifications, is a distinct part of the activity, alongside the standard programme: the same workshops make parts to drawing or from a sample, from a single piece to large series. For an accurate quotation, the part type, the module or pitch, the number of teeth, the bore diameter, the material and the drawing or sample matter: for a spare part for an old machine, the dimensions measured on the worn part are enough to start the check. Gears and racks are matched by module, and sprockets by chain pitch, so a complete set for a transmission can be quoted from a single request.

What do we supply from the MÄDLER range?

ProductDescription
Spur, bevel and worm gearsGears with straight teeth, bevel gears and worm wheels with worms, made in in-house workshops. The precision spur versions are made of hardened and ground steel, in modules from 1 to 3. The choice is made by module, number of teeth, bore and material.
RacksToothed racks for linear movement, matched with spur gears. For a replacement, the module, the section, the length and the tooth pitch are measured; parts needed in special lengths can be made to drawing.
Sprockets and roller chainsSprockets for roller chain drives, single-strand or double-strand, in the standard ISO sizes up to 24 B, and DIN ISO 606 roller chains, including the large 28 B and 32 B sizes, single or double. For a quotation, sprockets need the chain pitch, the number of teeth and the hub shape; chains need the size, single or double, and the length.
Trapezoidal threaded spindles, splined shafts and ball screw assembliesThreaded spindles with trapezoidal thread and nuts, splined shafts with splined hubs and clamping rings, plus ball screw assemblies to the customer's specification. The data needed: the thread diameter and pitch, the length, the machined ends and the load.

Why MÄDLER?

  • In-house production in two workshops in Germany, at Stuttgart and Hamburg — the transmission parts are manufactured, not just traded
  • Precision spur gears, hardened and ground, in modules from 1 to 3 — suited to gearboxes and positioning mechanisms
  • Worm wheels with worms and bevel gears — they change direction or speed on machines already installed
  • Racks and matching gears — for linear movements on machine axes
  • Parts to drawing or from a sample, from a single piece to large series — useful when the original part is no longer available

Which MÄDLER codes and series are requested most often?

CodeDescription
28 B-1Single roller chain, DIN ISO 606, 44.45 mm pitch
32 B-1Single roller chain, DIN ISO 606, 50.80 mm pitch
28 B-2Double roller chain, DIN ISO 606, 44.45 mm pitch
32 B-2Double roller chain, DIN ISO 606, 50.80 mm pitch
MAED-FIXToothed belt pulley system, with clamping ring hub
HTD 5MToothed belt profile for the pulleys of the MAED-FIX system
AT5Toothed belt profile for the pulleys of the MAED-FIX system
T5Toothed belt profile for the pulleys of the MAED-FIX system

Where is MÄDLER equipment used?

  • Production machinery — gears and racks for drives and positioning
  • Conveyor lines — sprockets and splined shafts for transmissions
  • Machine tools and feed mechanisms — trapezoidal threaded spindles and ball screw assemblies
  • Maintenance and repair — spare parts made from a sample or drawing

How do we supply MÄDLER in Romania?

We can quote MÄDLER gears, racks, bevel and worm gears, sprockets, splined shafts and hubs and threaded spindles, as well as parts made to drawing. For an accurate quotation, send the item code or, for an old part, its type, the module or pitch, the number of teeth, the bore diameter, the material and, if available, a drawing or a photo with dimensions. We bring items in to order. Items can ship in 24–72 h when the item is in stock, locally or at the supplier; items brought in to order usually take 1–4 weeks, and the exact lead time is stated in the quotation.

Parts made to drawing are quoted from the drawing or the sample, and the material and tolerances are confirmed in the quotation, before ordering.

Frequently asked questions about MÄDLER

What does MÄDLER make?

The Stuttgart company makes mechanical transmission elements in its own workshops in Stuttgart and Hamburg: gears, racks, bevel and worm gears, sprockets, splined shafts and trapezoidal threaded spindles, plus parts to drawing.

How do I identify a gear or a rack for replacement?

Measure the module, the number of teeth, the outside diameter and the bore, and for a rack the section and the length. For example, precision spur gears, hardened and ground, of module 1.5 have a pressure angle of 20°; the material and the teeth are confirmed in the quotation.

What dimensions do MÄDLER 28 B-1 and 32 B-1 roller chains have?

The 28 B-1 roller chain has a 44.45 mm (1 3/4 inch) pitch and the 32 B-1 50.80 mm (2 inch), both with a 30.99 mm minimum inner width (DIN ISO 606, ex DIN 8187). Roller diameter is 27.94 mm and 29.21 mm, minimum breaking force 200 kN and 250 kN respectively. We confirm the full code with the quotation.

Can you make a part to drawing or from a sample?

MÄDLER workshops make gears, racks, bevel and worm gears, threaded spindles with nuts and splined shafts to drawing or from a sample, from a single piece to large series. Send the drawing or the worn part with the dimensions measured.

What data do I send for a quotation on 28 B-2 or 32 B-2 roller chains?

The chain size (28 B or 32 B), whether it is single (28 B-1, 32 B-1) or double (28 B-2, 32 B-2) and the length required. If the chain is being replaced, a photo with dimensions helps us check the suitable version.

How do I request a MÄDLER quotation?

Send the MÄDLER code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: MÄDLER GmbH (manufacturer documentation)