Mason Industries supplier in Romania
Spring mounts, pump bases, Mason-Mercer expansion joints
Who is Mason Industries and what does it make?
Mason Industries is an American manufacturer of vibration, noise and seismic control systems, with more than 60 years of activity. The company has 45 engineers, 9 of whom hold professional licences in several American states. The range starts from the concrete requirement of an HVAC installation, not from a standard mount shape.
The products are grouped in several families. Spring mounts are supplied unhoused (free-standing, with a neoprene base), housed (Type “C”, with neoprene inserts that limit movement at start-up and shutdown), restrained and seismic, and for heavy loads steel springs with a deflection of 19–50 mm and individual capacities of up to 454,000 kg are used. To these are added rubber pads and mounts, bushings, levelling wedges, spring or neoprene hangers (including 30° swing hangers), steel bases for end suction, double suction, vertical or close-coupled pumps, bases for centrifugal and tubular fans, rails, air springs and Z-1011 seismic snubbers, for which the acceleration transmitted to the equipment does not exceed 4 G. Mason-Mercer is the line of expansion joints and flexible connectors: SAFEFLEX, MASONFLEX and VIBRAFLEX, plus flexible hoses, bellows connectors for pumps and ball joints.
A brand like this appears on machinery and installations such as chillers, pumping sets, large fans and riser pipes in tall buildings. A correct replacement starts from the load on each point, the static deflection required and, in seismic zones, from the restraint class required by the project.
What do we supply from the Mason Industries range?
| Product | Description |
|---|---|
| Spring mounts (unhoused, housed, restrained, seismic) | Steel spring mounts for plant room equipment: the free-standing versions have a neoprene base, the housed ones (Type “C”) have neoprene inserts that limit movement, and the restrained and seismic ones hold the equipment under lateral loads. |
| Bases and rails for pumps and fans | Structural steel frames for end suction, double suction, vertical and close-coupled pumps, as well as for centrifugal and tubular fans, on which the equipment is mounted together with the motor before isolation. |
| Mason-Mercer: SAFEFLEX, MASONFLEX, VIBRAFLEX | The line of rubber and stainless steel expansion joints, pump connectors and flexible hoses, used on pipes affected by thermal expansion or by vibration transmitted by pumps. |
| Air springs and hangers | Multiple-bellows air springs, with a natural frequency of up to 3 Hz, plus spring and neoprene hangers (including 30° swing) for suspended pipes and equipment. |
Why Mason Industries?
- Steel springs with a deflection of 19–50 mm and individual capacities of up to 454,000 kg — covers everything from plant room machines to the isolation of entire buildings
- Z-1011 seismic snubbers that limit the acceleration transmitted to the equipment to 4 G — relevant for installations in areas with seismic requirements
- Multiple-bellows air springs, with a natural frequency of up to 3 Hz — for vibrations that reach the audible noise range
- Structural bases for pumps and fans — the equipment and the motor on the same frame, on mounts sized together
- Mason-Mercer line of expansion joints and flexible connectors — pipes, pumps and piping treated as a system
Which Mason Industries codes and series are requested most often?
| Code | Description |
|---|---|
| Type C | Housed spring mount with neoprene inserts |
| Z-1011 | Seismic snubber with strong damping, 4 G maximum |
| LDS | Continuous pad for isolating walls from the slab |
| SAFEFLEX | Flexible expansion joint from the Mason-Mercer line |
| MASONFLEX | Flexible expansion joint from the Mason-Mercer line |
| VIBRAFLEX | Flexible connector from the Mason-Mercer line |
| 30° Swing Spring Hanger | Spring hanger with 30° swing |
| Air Spring | Multiple-bellows air spring, maximum natural frequency 3 Hz |
| Wedge Jack | Levelling wedge for equipment |
| End Suction Pump Base | Structural base for end suction pumps |
| Centrifugal Fan Base | Structural base for centrifugal fans |
Where is Mason Industries equipment used?
- HVAC and tall buildings — chillers, pumps, fans, risers with thermal expansion
- Installations in seismic zones — snubbers and restrained mounts
- Noise-sensitive buildings — floating floors, isolated walls and acoustic hangers
- Isolation of entire buildings — neoprene or natural rubber bearings and spring assemblies
- Industrial utilities — pumps and fans on isolated structural bases
How do we supply Mason Industries in Romania?
We can take requests for Mason spring mounts, hangers, pump bases and expansion joints, based on product data sheets or project data. Supplied to order, usually in 1–4 weeks, and large systems or those with seismic requirements may need a longer lead time, confirmed in the quotation. For a correct quotation we need to receive the mass of the equipment per support point, the static deflection required, the type of equipment (pump, fan, chiller), whether the project imposes seismic restraints and, for expansion joints, the pipe diameter, pressure and temperature. Photographs and old codes from the machine documentation help us with identification.
Sizing of a seismic system is based on the designer's calculation.
Frequently asked questions about Mason Industries
What does Mason Industries make?
The American company makes spring mounts, pads and bushings, hangers, bases for pumps and fans, air springs, seismic snubbers and Mason-Mercer flexible expansion joints. All are intended for vibration and noise control in the mechanical installations of buildings.
How do I choose between a spring mount and a rubber one?
The practical limit of rubber is a natural frequency of about 5.5 Hz, and below this springs are used. The decision depends on the speed of the equipment and the stiffness of the slab, so we need the mass and speed of the machine to prepare the selection.
Do you supply Mason products in Romania and how fast?
Yes, to order, usually in 1–4 weeks for common items. Large spring systems for the isolation of a building or seismic components often need a longer lead time, which is stated in the quotation.
Can I replace an old expansion joint or pump mount with one from the Mason line?
Only after checking the mounting dimensions, pressure, temperature and deflection. Equivalences are confirmed only with data; send us the marking on the part, the connection dimensions and photographs, and we check the compatible version.
What do I need to send for a quotation for isolating a pump or a fan?
The mass of the equipment with the motor, the speed, the dimensions of the existing frame, the pump type (end suction, double suction, vertical) and whether the installation requires seismic resistance. For expansion joints add the nominal diameter, the fluid, the pressure and the temperature.
How do I request a Mason Industries quotation?
Send the Mason Industries code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 22 November 2026 · Sources: Mason Industries (manufacturer documentation)

