Micropump supplier in Romania
Precision gear pumps for fluid dosing
Headquarters: Vancouver, Washington, USA
Who is Micropump and what does it make?
Micropump is an American manufacturer of precision gear pumps, based in Vancouver, Washington. The company was founded by the inventor of the magnetically coupled gear pump, a solution with no dynamic shaft seal, used where leakage or contamination of the fluid is not acceptable. The main range includes the external gear series GA, GAH, GB, GC, GD, GJ, GLH, GMH, GNH, GJR and GAF, plus the centrifugal CA series. For the Romanian market we can quote from this range on the basis of flow and pressure parameters provided by the customer.
What sets Micropump apart is the combination of very small positive displacement (from 0.017 ml/rev for the GA series) and magnetic coupling, which gives a constant, repeatable flow at system pressures of up to 345 bar for the GAH high-pressure versions. The CA series, centrifugal, covers speeds of up to 6,000 rpm and system pressures of up to 14 bar, for applications where flow precision matters less than circulation speed. The range belongs to the miniature precision pump segment.
Micropump suits the precise dosing of aggressive or costly fluids — laboratory reagents, inks, fuel additives — where the small volume per revolution and repeatability matter more than total flow.
What do we supply from the Micropump range?
| Product | Description |
|---|---|
| GA / GAH Series | External gear pumps, displacement of 0.017 to 0.092 ml/rev, with a maximum differential pressure of 5.2 bar. The GAH version keeps the same displacement but raises the system pressure to 345 bar, for precision dosing at high pressures in analytical or laboratory equipment. |
| GB / GC / GD Series | A medium-displacement family, between 0.26 and 3.48 ml/rev, with system pressures between 21 and 103 bar depending on the model. Used for cooling circuits, additive dosing and transfer of viscous fluids in OEM equipment. |
| GJ / GLH / GMH / GNH Series | Higher-capacity pumps, up to 24.5 ml/rev for the GNH, with system pressures of up to 103 bar. The GJR is the version resistant to abrasive fluids from the same design family. |
| CA Centrifugal Series | Centrifugal pump with magnetic drive, recommended speed of up to 6,000 rpm and a maximum system pressure of 14 bar, for circulating fluids at higher flows than the gear pump series allow. |
Why Micropump?
- Magnetic coupling with no dynamic shaft seal — no leakage and no contamination of the pumped fluid
- Very small displacement per revolution (from 0.017 ml/rev) for precision dosing at low volumes
- The GAH high-pressure version, up to 345 bar system pressure (GLH, GMH and GNH — up to 103 bar)
- The centrifugal CA series for higher flows, at speeds of up to 6,000 rpm
Which Micropump codes and series are requested most often?
| Code | Description |
|---|---|
| GA Series | 0.017–0.092 ml/rev, max. differential pressure 5.2 bar |
| GAH Series | as GA, system pressure up to 345 bar |
| GB Series | 0.26–1.17 ml/rev, max. system pressure 21 bar |
| GC Series | 0.811–3.48 ml/rev, max. system pressure 103 bar |
| GD Series | 3.48 ml/rev, cavity type, max. pressure 103 bar |
| GJ Series | 0.316–1.23 ml/rev, cavity type |
| GLH Series | 4.6–7.7 ml/rev, max. system pressure 103 bar |
| GMH Series | 12.2 ml/rev, max. system pressure 103 bar |
| GNH Series | 24.5 ml/rev, max. system pressure 103 bar |
| GJR Series | GJ version resistant to abrasive fluids |
| GAF Series | high differential pressure, 17.2 bar |
| CA Series | centrifugal pump, max. speed 6,000 rpm |
Where is Micropump equipment used?
- Textile and ceramic printing — precision ink dosing
- Analytical and laboratory equipment — reagent circulation
- Diesel emissions control — dosing of additives and reduction solutions
- Fuel additive injection — precise dosing at low flows
- Fuel cell technology — circulation of process fluids
- Botanical extraction — transfer of solvents in controlled volumes
How do we supply Micropump in Romania?
For Micropump we work from the manufacturer's technical documentation: the GA-GNH and CA series above, with the displacements and pressures listed there; lead time and availability are stated in the quotation. We bring in the pumps to order through EU or USA supply channels, usually in 1–4 weeks — supplied to order, given the large number of material and fitting combinations. For a quotation we need the pumped fluid, the required flow and differential pressure, plus the type of drive desired (DC motor, AC motor or direct coupling).
The combination of material and fitting is checked individually on each request, before the quotation.
Frequently asked questions about Micropump
What range of products does Micropump have?
Micropump makes miniature, magnetically driven gear pumps for the precision dosing of fluids at low flows, plus a centrifugal series (CA) for higher flows. They are used in analytical equipment, printing, additive injection and emissions technology, where a dynamic seal is not acceptable.
How do I choose a Micropump pump by displacement per revolution?
The displacement per revolution (from 0.017 ml for the GA series up to 24.5 ml for the GNH) determines the minimum controllable flow of your application. For very fine dosing choose a series with a small displacement; for continuous circulation at higher flows, the CA centrifugal series or the GJ/GLH versions are more suitable.
Do you supply Micropump pumps in Romania?
Yes, we bring in Micropump pumps to order through EU or USA supply channels, usually in 1–4 weeks depending on the exact configuration. This range is supplied to order because of the large number of material and fitting variants available.
What data should I send for a Micropump pump quotation?
You need to specify the pumped fluid, the desired flow, the required differential pressure and the type of drive (motor or direct coupling). With this data we identify the suitable series and the wetted end material compatible with your fluid.
How do I request a Micropump quotation?
Send the Micropump code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 20 November 2026 · Sources: Micropump, Inc. (manufacturer documentation)

