Moog supplier in Romania
From the Moog range we quote the D633 and D634 direct-drive servo valves, the RKP series radial piston pumps and the RMC75E motion controller; we start from the code marked on the component.
Founded in 1951 · Headquarters: New York, USA
Who is Moog and what does it make?
Moog is an established name in servo valves and precision hydraulic control systems - from aerospace programmes to flight simulators and modern offshore wind turbines. More than 70 years of engineering focused on extremely precise control of fluids under pressure. Moog servo valves are frequently used in materials testing equipment, where positioning and force control accuracy matter; the values achieved depend on the valve model and the system.
Their core technology is the jet pipe or flapper-nozzle servo valve, which converts small electrical signals (±10V, 4-20mA) into precise, powerful hydraulic movements. The D634 series (direct drive servo valve) offers bandwidth up to 100Hz, hysteresis below 0.5% and linearity of ±1% over the full stroke. The D765 series (proportional valve) is more economical while still offering excellent control for non-critical applications. Then there are the complete systems - RMC75E motion controllers for multi-axis servo-hydraulic systems, servo drives and amplifiers that close the control loop at 1kHz, and integrated position and pressure transducers.
Moog offers valves and pumps as well as controllers and servo drives for hydraulic systems. In applications where precise hydraulic force/position control is vital - aerospace structural tests, motion simulators, steel rolling mills, large injection molding presses - Moog is used in applications with demanding hydraulic control requirements; the model is chosen according to the manufacturer's datasheet.
What do we supply from the Moog range?
| Product | Description |
|---|---|
| D634 Direct Drive Servo Valve | Hydraulic servo valve with direct drive torque motor - a high-precision solution for position/force/pressure control in industrial hydraulics. The nominal flow depends on the size and model of the valve (D633: 40 l/min, D634: 100 l/min at 35 bar). Bandwidth ±3dB at 60-100Hz (model dependent), hysteresis <0.5%, linearity ±1%, symmetry ±3%. Fluid temperature -40°C to +80°C, viscosity 10-400 cSt. Options: integrated LVDT spool position feedback, SAE, ISO, CETOP mounting, integrated 5μm absolute filters. Applications: servo-hydraulic materials testing, motion simulators (flight, driving), large injection molding presses, steel hot rolling mills, active vibration damping. |
| D765 Proportional Directional Valve | Direct-acting proportional hydraulic valves for standard industrial applications. Flow rate 20-300 L/min, pressure up to 350 bar. Bandwidth ±3dB at 20-35Hz, hysteresis <3%, linearity ±3%, repeatability ±1.5%. Command 4-20mA or ±10V with optional spool position feedback. Temperature -30°C to +80°C, viscosity 10-500 cSt, recommended filtration 10μm. Versions: 2-stage (pilot-operated) for flow >100 L/min, direct-operated for <100 L/min. Applications: mobile hydraulics (excavators, cranes), industrial metal forming presses, plastic injection molding tier-2, non-critical test rigs. |
| RMC75E Motion Controller | Multi-axis controller dedicated to servo-hydraulic systems. Closed control loops at 1kHz (1ms), advanced PID algorithms with feed-forward and adaptive tuning. Inputs: position transducers (LVDT, Temposonics, encoders), force/pressure cells (strain gauges or piezo elements). Outputs: servo valve commands ±10V/4-20mA. Communication: EtherNet/IP, Profinet, Modbus TCP, USB for programming. Software: RMCTools with graphical or text-based programming, 4-channel real-time scope, data logging, remote diagnostics. Ideal for universal testing machines, structural test rigs, motion simulators, steel rolling stands. It replaces PLC + motion card + amplifier with a hydraulically optimised solution - quick setup, automatic tuning, easy troubleshooting. |
| Moog RKP radial piston pumps | Radial piston hydraulic pumps for systems that require high pressure and stable operation. The Moog RKP range (RKP19 ... RKP250) has displacements from 19 to 250 cm³/revolution. |
Why Moog?
- Precision servo valves - hysteresis, bandwidth and linearity values depend on the model
- Complete integrated systems - valve + controller + drives + HMI from a single OEM
- Proven extreme applications - aerospace, motorsport simulators, offshore wind, steel mills
- Multi-axis motion control - the number of axes and synchronisation accuracy depend on the model
- Advanced diagnostics - continuous parameter monitoring, predictive maintenance alerts
- Manufacturer technical support - arranged directly with Moog
Which Moog codes and series are requested most often?
| Code | Description |
|---|---|
| D633 | direct-drive servo valve, ISO 4401 size 03, flow 40 l/min |
| D634 | direct-drive servo valve, ISO 4401 size 05, flow 100 l/min |
| RKP19 | radial piston pump, displacement 19 cm3/revolution |
| RKP32 | radial piston pump, displacement 32 cm3/revolution |
| RKP45 | radial piston pump, displacement 45 cm3/revolution |
| RKP63 | radial piston pump, displacement 63 cm3/revolution |
| RKP80 | radial piston pump, displacement 80 cm3/revolution |
| RKP100 | radial piston pump, displacement 100 cm3/revolution |
| RKP140 | radial piston pump, displacement 140 cm3/revolution |
| RKP250 | radial piston pump, displacement 250 cm3/revolution, theoretical flow of about 375 l/min at 1,500 rpm |
Where is Moog equipment used?
- Aerospace - flight control actuators, structural test rigs, landing gear testing
- Simulation - flight simulators (pilot training), automotive driving simulators
- Material Testing - universal tension/compression testing machines, fatigue testing
- Steel Production - hot rolling mills, continuous casting, high-pressure descaling
- Plastics - large injection molding presses (>1,000 ton clamping force)
- Energy - offshore wind pitch control, hydropower turbine governors, oil&gas subsea
- Automotive - chassis hydroforming, crash test sleds, powertrain test benches
- Defense - artillery recoil systems, tank turret control, missile launch systems
- Marine - fin stabilisers, steering gear for heavy ships, submarine control surfaces
- Entertainment - theme park rides motion platforms, special effects movie studios
How do we supply Moog in Romania?
We work from Moog's technical documentation, and custom configurations are confirmed on each request. We bring in the Moog components requested, typically in 1–4 weeks to order, and for common accessories sometimes in 24–72 h when the item is in stock, locally or at the supplier. For a correct quotation, send us the complete technical specifications of the valve or hydraulic system – pressure, flow, type of command signal. We come back with a realistic lead time once we have confirmed availability with the supplier.
Lead times for custom Moog configurations are set for each request, and warranty service is carried out through the manufacturer's channels.
Frequently asked questions about Moog
What flow does a Moog D634 servo valve have compared with the D633?
The Moog D634 valve has a nominal flow of up to 100 l/min at a pressure drop of 35 bar, with a maximum flow of 180 l/min, built on ISO 4401 size 05 (NG10). The D633 is smaller, size 03 (NG6), with a nominal flow of 40 l/min and a maximum of 75 l/min. The choice depends on the flow required by the controlled actuator.
How do I choose the size of a Moog RKP pump for a hydraulic system?
The choice of a Moog RKP pump depends on the displacement required per revolution: the range starts at RKP19 (19 cm3/revolution) and goes up to RKP250 (250 cm3/revolution, about 375 l/min theoretical flow at 1,500 rpm). Calculate the flow required by the actuators at the available motor speed and choose the next larger displacement, leaving a margin for volumetric losses.
Do you supply Moog valves and pumps in Romania?
Yes, Moog components (valves, pumps) are brought in to order, based on the exact series code found in the manufacturer's documentation. As a guide, allow typically 1–4 weeks to order, varying with the electronic or mechanical configuration required for each valve or pump.
What information do I send for a Moog valve quotation?
The complete code of the valve or pump is useful, if you have it from the label of the existing equipment, plus the working pressure and the flow required. If you are replacing a faulty part, a photo of the Moog nameplate helps find the exact version in the manufacturer's catalogues, including the electrical signal options available for that series.
What does direct drive mean on a Moog servo valve?
Direct drive means that the electromagnetic force motor moves the valve spool directly, without the hydraulic pilot stage used in classic two-stage valves. On the Moog D633 and D634 series this reduces response time, with a step time of 12 and 20 milliseconds respectively, and simplifies maintenance by eliminating the additional pilot filter.
How do I request a Moog quotation?
Send the Moog code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Moog Inc., Wikipedia (manufacturer documentation)

