Norgren supplier in Romania
Pneumatic and hydraulic components
Founded in 1926 · Headquarters: Lichfield, UK
Who is Norgren and what does it make?
Norgren is an industrial pneumatics manufacturer with a worldwide presence - over 95 years of activity in compressed air control for automation. From the first valves and cylinders for the aviation industry to today's electronic pneumatic motion control systems, Norgren has steadily extended its technology range. Norgren components are used in a wide range of applications - from high-speed packaging machines with compact ISO cylinders to automotive assembly lines with valve manifolds managed over an industrial bus - with reliability documented by the manufacturer over millions of cycles.
Their industrial range is vast and well organised by category: pneumatic cylinders (ISO 15552 standard and compact, rotary, guided, rodless, with magnet for sensors), valves (3/2, 5/2, 5/3 directional, monostable/bistable, proportional for flow/pressure control), FRL units (filters, pressure regulators, lubricators that combine modularly), actuators (clamps, grippers, rotary, linear slides), fittings and tubing (push-in, instant, brass/stainless steel for all diameters). And then there is the electronic line - valve manifolds with integrated driver (PROFIBUS, PROFINET, EtherNet/IP, IO-Link communication), electronic pressure regulators with closed-loop feedback, pneumatic motion controllers.
The parameters of each product are those in the manufacturer's technical documentation, which we use to identify the right code.
What do we supply from the Norgren range?
| Product | Description |
|---|---|
| ISO 15552 Pneumatic Cylinders | Standard ISO 15552 pneumatic cylinders (formerly ISO 6431) - a widespread configuration in industrial automation, according to the ISO 15552 standard. Piston diameter 32-320mm, stroke up to 2,000mm (depending on diameter), working pressure 1-10 bar. Materials and seals depend on the series chosen and are confirmed from the manufacturer's datasheet. Cushioning: fixed elastomer (standard) or adjustable pneumatic (option) to reduce shock at the ends of the stroke. Integrated permanent magnet for reed/Hall proximity sensors without contact. Mounting: numerous options (front/rear flange, clevis, trunnion) according to ISO. Applications: packaging machines, conveyors, automotive assembly, material handling. The 63mm × 100mm stroke model is a standard solution for robust pneumatic linear motion, interchangeable between manufacturers. |
| V60 Fieldbus Valve Manifold | Pneumatic valve manifolds with integrated electronic control - dramatically reduce wiring and installation costs compared with individual valves. The number of valves and the communication protocols depend on the configuration; we confirm them by code, from the Norgren documentation. Advanced diagnostics: status monitoring of each valve, electrical/pneumatic fault alarms, cycle counters for predictive maintenance. Flow, pressure and protection rating depend on the series and are confirmed from the manufacturer's datasheet. Applications: modular packaging machines, automotive assembly stations, pick&place systems. It replaces many individual valves, connectors and wires with a single manifold plus one Ethernet cable - simpler wiring and much easier troubleshooting with centralised diagnostics. |
| VP50 Proportional Pressure Regulator | Proportional electronic pneumatic pressure regulator for precise force control in assembly and testing applications. The pressure range, control signal, flow and protection rating depend on the model; we confirm them by code, from the Norgren documentation. Applications: press-fit force control (automotive bearings, electronic connectors), controlled leak pressure testing, blow molding with variable pressure per phase. It replaces manual regulators that need mechanical adjustment by the operator - the setpoint is sent from the PLC, with perfect repeatability batch after batch. |
| Excelon Plus FRL Units | Modular filter-regulator-lubricator (FRL) combination units for preparing compressed air at the point of use. Filter: water and particle separation, with a choice of filtration grades, transparent polycarbonate or aluminium bowl, manual or auto drain. Regulator: pressure adjustable 0.5-12 bar with pressure gauge, relieving or non-relieving. Lubricator: fog type with drop rate adjustment for valves and cylinders that require lubrication. Flow depends on size (1/8" to 1" NPT/G). Modular stacking with brackets that eliminate threading - configure the FRL exactly as you need it (F, FR, FRL, FFRL for dual-stage filtration). Applications: air supply to individual machines, branch lines in factories, manual pneumatic work stations. It protects downstream pneumatic equipment from contamination and ensures constant pressure for repeatable performance. |
Why Norgren?
- 95+ years of pneumatics experience - from aviation to modern industrial automation
- Public technical documentation for each series, with parameters declared by the manufacturer
- A range for the pneumatic system - cylinders, valves, FRL, actuators, electronic control
- Advanced technology - proportional valves, motion control, IO-Link, industrial bus
- High durability - ISO cylinders with extended fatigue testing
- Product codes and the manufacturer's technical documentation
Which Norgren codes and series are requested most often?
| Code | Description |
|---|---|
| Series 1 | general-purpose solenoid valve, Cv between 0.035 and 0.290 |
| Series 2 | solenoid valve for pressures up to 1000 psi, Cv between 0.035 and 0.290 |
| Series 3 | higher-capacity solenoid valve, 5/64–1/4" orifices |
| Series 6 | high-pressure solenoid valve, up to 1200 psi |
| Series 9 | compact 0.65 W solenoid valve, vacuum compatible |
| Q2 Quick-Connect | valve with plastic body and push-to-connect fittings, with hygiene approvals according to the manufacturer's documentation |
| Isolation Valves | versions with sealed diaphragm for corrosive media, on series 1, 2, 6, 9 |
| 5020-1 | solenoid valve with 280 series connector, N/O configuration |
| 5020-4 | solenoid valve with ring terminals, N/O configuration |
| 5020-20A | solenoid valve with 2 diodes and exhaust protection, N/C |
| 5020-21A | solenoid valve with 2 diodes, N/O configuration |
| 5020-23A | solenoid valve with resistor, N/O configuration |
| 5022-106 | solenoid valve with diode, 1/4"-18 inlet, N/C |
| 5023-1 | solenoid valve with free leads, 1/4"-18 inlet, N/O |
| 5025-1 | solenoid valve with diode, Weather Pack connector, N/C |
| 5025-4 | solenoid valve with diode and top bracket, N/O |
| 85020-0 | solenoid valve with mounting accessories, free leads, N/O |
| 85020-1 | solenoid valve with mounting accessories, 280 series connector |
Where is Norgren equipment used?
- Packaging - high-speed cartoning, wrapping, filling with fast cycles, millions per year
- Automotive - assembly lines, paint shops, welding stations with extensive pneumatics
- Food & Beverage - filling, capping, labeling with hygiene and wash-down requirements
- Pharmaceuticals - tablet pressing, blister packaging, handling with clean room requirements
- Electronics - PCB assembly, testing, handling of delicate components with controlled force
- Material Handling - automatic sorting, conveyors, pick&place with fast actuators
- Medical Devices - implant assembly, testing, sterile packaging with precision and cleanliness
- Printing - web tension control, register adjustment, flying shear with fast response
- Textile - weaving, dyeing and finishing machines with valves and cylinders in a humid environment
- Energy - wind turbines (pitch, yaw), hydropower (governors) with heavy-duty actuators
How do we supply Norgren in Romania?
We work from the technical documentation published by Norgren; for electronic control configurations, the quotation states what we can confirm. Norgren pneumatic components are supplied, in 24–72 h for standard parts when the item is in stock, locally or at the supplier, or usually in 1–4 weeks to order for manifolds and custom configurations. For a correct quotation, send us the cylinder diameter, the stroke required and the working pressure of your system. We confirm the lead time after checking availability at the supplier.
Availability for each Norgren configuration is checked on each request, and warranty service is handled through the manufacturer's service network.
Frequently asked questions about Norgren
What is the difference between series 1 and series 6 in Norgren valves?
Series 1 is the basic range, with a Cv coefficient between 0.035 and 0.290 and a maximum differential pressure of 800 psi, suited to general applications. Series 6 is the top version, with a maximum pressure of 1200 psi and a wider range of orifices, from 1/32 to 3/8 inch, for applications that require higher flow or pressure.
How do I read the code of a Norgren solenoid valve, for example 5020-21A?
The code 5020-21A shows the base family (5020), followed by a digit describing the electrical or mechanical configuration and, sometimes, a letter for the specific version. For this model, the suffix indicates a valve with two protection diodes and a normally open (N/O) configuration. Always check the complete code on the valve body before ordering a spare part.
What orifices and maximum differential pressure do Norgren Q2 plastic-body valves have?
The Q2 is a 2-way, normally closed valve with a plastic body. The orifice can be 1/8", 5/32", 3/16", 1/4" or 5/16", and the maximum operating pressure differential (MOPD) decreases as it gets larger: 120, 80, 40, 15 and 5 psi respectively. We confirm the exact variant in the quotation.
What should I send for a Norgren valve quotation?
The complete code from the label of the existing valve is useful, including the letter suffix, since it describes the electrical configuration and the connector type. If you do not have the code, state the working pressure, the type of fluid and whether you need a normally open or normally closed configuration, so that we can identify the right Norgren version.
What is a Norgren isolation valve?
A Norgren isolation valve uses a diaphragm that separates the internal mechanism from the controlled fluid, creating a dry barrier between the electrical components and the working medium. Isolation versions exist for series 1, 2, 6 and 9 and are recommended for corrosive media or where contact of the fluid with the internal metal parts would shorten the service life of the valve.
How do I request a Norgren quotation?
Send the Norgren code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Norgren (manufacturer documentation)

