Pompe Garbarino supplier in Romania
For Pompe Garbarino we quote EN 733 standardised centrifugal pumps (MU), ISO 2858 / ISO 5199 chemical pumps (CN), multistage pumps (G, GH), side channel pumps (BT) and oscillating disc pumps (P); for a quotation we need the flow, the head, the fluid and the material.
Founded in 1932 · Headquarters: Acqui Terme, Italy
Who is Pompe Garbarino and what does it make?
Pompe Garbarino is an Italian manufacturer of centrifugal and positive displacement pumps, based in Acqui Terme, in Piedmont, and active since 1932. The pumps are intended for industrial, chemical, petrochemical, desalination, civil marine and offshore installations, on process lines and general services.
The range is divided into series denoted by letters. The MU series covers EN 733 standardised centrifugal pumps, single-stage with axial suction, used for fresh and sea water, condensate, oils and chemicals. CN are the chemical pumps conforming to ISO 2858 and ISO 5199, with a hydraulically balanced overhung impeller and mechanical seal to DIN. The G series comprises multistage pumps with a radial casing, and GH is the high-pressure version, with pressures up to 85 bar and flow rates up to 500 m3/h, suitable for reverse osmosis and boiler feed. The BT series groups multistage side channel pumps, self-priming, and P are hollow oscillating disc pumps, reversible.
Other families include ZN for thermal oil circulation up to 350 °C, MCA with a recessed impeller for viscous liquids with solids, AD self-priming with an open impeller, and VS with a suspended vertical shaft. Materials range from cast iron and bronze to austenitic stainless steel, duplex, super duplex and special alloys. When replacing a pump, the series, the size and the exact material matter, because the same series is supplied in several versions.
What do we supply from the Pompe Garbarino range?
| Product | Description |
|---|---|
| EN 733 standardised centrifugal pumps (MU) | Single-stage centrifugal pumps with axial suction and a single-volute casing, for fresh and sea water, condensate, oils and chemicals. The shaft is supported in an oil bath bracket, and the sealing is a simple mechanical seal to DIN 24960. |
| ISO 2858 / ISO 5199 chemical pumps (CN) | Single-stage centrifugal pumps, hydraulically balanced overhung impeller and oil bath bearings. The versions include a semi-open impeller for abrasive liquids or liquids with solids, an inducer for low NPSH and a heated casing. |
| G and GH multistage pumps | The G series has a radial casing and serves steelworks, water networks and boiler feed. GH is the high-pressure development, in four sizes (50, 65, 100, 150) and eight hydraulics, up to 85 bar and 500 m3/h. |
| BT side channel pumps, P oscillating disc pumps and ZN thermal oil pumps | BT are self-priming multistage pumps, with a working pressure of up to 40 bar below 120 °C. P are oscillating disc pumps, reversible and self-priming. ZN circulate thermal fluids up to 350 °C, without cooling of the seal chamber. |
Why Pompe Garbarino?
- EN 733 (MU) and ISO 2858 / ISO 5199 (CN) standardised pumps — standard dimensions, so simple replacement on existing installations
- GH high-pressure multistage pumps — pressures up to 85 bar and flow rates up to 500 m3/h for reverse osmosis and boilers
- BT side channel pumps — self-priming, with suction up to 8 m, for liquids with vapours or light fluids
- Varied materials — cast iron, bronze, austenitic stainless steel, duplex and special alloys according to the fluid
- Series for difficult fluids — ZN for thermal oil up to 350 °C, MCA and AD for liquids with suspended solids
Which Pompe Garbarino codes and series are requested most often?
| Code | Description |
|---|---|
| MU | EN 733 standardised centrifugal pumps |
| CN | ISO 2858 and ISO 5199 chemical pumps |
| G | Multistage centrifugal pumps with radial casing |
| GH | High-pressure multistage pumps, up to 85 bar |
| BT | Multistage side channel pumps, self-priming |
| P | Hollow oscillating disc pumps, reversible |
| ZN | Pumps for thermal oil circulation, up to 350 °C |
| MCA | Pumps with recessed open impeller, vortex effect |
| AD | Self-priming pumps with open impeller |
| VS | Suspended centrifugal pumps with vertical shaft |
Where is Pompe Garbarino equipment used?
- Chemical and petrochemical plants — CN and MU pumps for chemicals and hydrocarbons
- Desalination and reverse osmosis — GH and G multistage pumps for high pressure
- Power plants and boiler feed — multistage pumps
- Steelworks and water stations — G, MU and VS pumps
- Civil marine and offshore — pumps for cooling, bilge, process water and general services
How do we supply Pompe Garbarino in Romania?
From the Pompe Garbarino range we can quote MU, CN, G, GH, BT, P, ZN and the other industrial series. For a quotation, send the series and size from the nameplate, the flow, the head, the fluid with its temperature and the material required; a photo of the nameplate helps a lot. An item can ship in 24–72 h when the item is in stock, locally or at the supplier. For the other orders we supply to order, usually in 1–4 weeks; special versions may take longer, and the exact lead time appears in the quotation.
The same series is supplied in several materials and seal versions; we establish the exact variant from the pump nameplate before the quotation.
Frequently asked questions about Pompe Garbarino
What kind of pumps does Pompe Garbarino make?
Pompe Garbarino makes centrifugal and positive displacement pumps at Acqui Terme, in Italy: EN 733 standardised centrifugal, ISO 2858 and ISO 5199 chemical, multistage, side channel, oscillating disc, gear pumps and pumps for thermal oil. The company's activity began in 1932.
How do I choose between the MU series and the CN series?
MU follows EN 733 and serves water, condensate, oils and many light chemical fluids. CN follows ISO 2858 and ISO 5199 and comes with variants for abrasive, viscous or solids-laden liquids and with special seals. For aggressive fluids or fluids with particles, CN is usually the starting point.
How long does it take to get a Garbarino pump from the MU series?
An item can ship in 24–72 h when the item is in stock, locally or at the supplier. Other pumps are supplied to order, usually in 1–4 weeks, and depending on the specification the lead time may be longer. The final lead time appears in the quotation.
Can I find a replacement pump for one with an old series?
We check the possibility from the nameplate: series, size, material and seal type. EN 733 and ISO 2858 standardised series have standardised dimensions, which helps, and the nameplate data lets us establish interchangeability. Send a photo of the nameplate and, if there is one, the installation drawing.
What data do you need for a quotation on a Garbarino pump?
The series and size, the flow and the head, the fluid with its temperature and density, the presence of solids, the material required and the seal type. For multistage pumps add the discharge pressure. With these we check the suitable series and come back with the lead time.
How do I request a Pompe Garbarino quotation?
Send the Pompe Garbarino code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Pompe Garbarino (manufacturer documentation)

