SCHWER Fittings supplier in Romania
For SCHWER Fittings we quote stainless steel cutting ring fittings from the LL, L and S series to EN ISO 8434-1, threaded fittings G, R/Rp and NPT, cone couplings and H2-Lok fittings; the series, the tube diameter and the thread define the item.
Founded in 1995 · Headquarters: Denkingen, Germany
Who is SCHWER Fittings and what does it make?
SCHWER Fittings is a German manufacturer of stainless steel fittings, active since 1995 and based in Denkingen. The range starts from stainless steel cutting ring fittings, with a 24° cone to EN ISO 8434-1, and extends to threaded fittings, cone couplings, double ferrule fittings, ball valves and other valves, weld fittings, hose fittings, hoses, tubes, flanges, quick couplings and mounting accessories.
Cutting ring fittings are divided into three series by pressure. The LL series is used for compressed air, plastic tubes and laboratory equipment, at low pressures, up to PN 100. The L series withstands up to PN 315 and appears in measurement and control technology, in the paper and plastics industries, in pharmaceuticals and in hydraulics. The S series is for high pressure, vibration and heavy mechanical loads, as a rule PN 250–400 and up to PN 630 with a tapered thread. The sizes cover tubes from 6 to 42 mm, and the recommended tube is seamless stainless steel 1.4571.
Threaded fittings come with G threads to DIN EN ISO 228-1, R and Rp to DIN EN 10226-1 and NPT to ASME B1.20.1, in material grades 1.4571, 1.4404 and 1.4408, with investment cast versions. For a correct quotation, the series, the tube diameter, the thread and the material matter.
What do we supply from the SCHWER Fittings range?
| Product | Description |
|---|---|
| Cutting ring fittings LL, L, S | Hardened cutting ring with two edges, 24° cone to EN ISO 8434-1, for tubes of 6–42 mm. LL is for low pressure up to PN 100, L up to PN 315, and S for PN 250–400, up to PN 630 with a tapered thread. |
| Stainless steel threaded fittings | Sockets, double nipples, reducers, elbows, bends, tees, crosses, plugs and hose nipples, with G, R/Rp and NPT threads. The versions with suffix -7 are machined from solid material, and those with -4i and -5i are investment cast in 1.4408. |
| Cone couplings and double ferrule fittings | Double ferrule fittings from the u2-Lok and H2-Lok families, the latter intended for hydrogen systems, couplings with cone sealing and fittings to DIN 3861 for hoses and for O-ring sealing. |
| Ball valves, weld fittings and hoses | The range includes ball valves and other valves, weld fittings, hose fittings, hoses, tubes, flanges, quick couplings and parts for measurement and control. |
Why SCHWER Fittings?
- Three series of cutting ring fittings, LL, L and S — the working pressure points to the right series
- 24° cone to EN ISO 8434-1 — the geometry is the same as that of standard fittings in existing installations
- G, R/Rp and NPT threads — both European installations and equipment with American threads are covered
- Material variants 1.4571, 1.4404 and 1.4408 — the choice is made by the fluid and by the environment
- Fittings, ball valves and hoses from the same range — a single request can cover several items
Which SCHWER Fittings codes and series are requested most often?
| Code | Description |
|---|---|
| LL | Cutting ring fittings for low pressure, up to PN 100 |
| L | Cutting ring fittings, up to PN 315 |
| S | Cutting ring fittings for high pressure, PN 250–400 |
| EN ISO 8434-1 | Standard for cutting ring fittings with a 24° cone |
| DIN 3853 | Threaded fittings with a 24° internal cone |
| DIN 3861 | Cone fittings with O-ring and hose adapters |
| DIN EN ISO 228-1 | G thread, parallel pipe thread |
| DIN EN 10226-1 | R tapered and Rp parallel thread |
| ASME B1.20.1 | NPT thread, American tapered |
| -7 | Threaded fittings in 1.4571, machined from solid material |
| -4i | Threaded fittings, investment cast in 1.4408 |
| H2-Lok | Double ferrule fittings for hydrogen systems |
Where is SCHWER Fittings equipment used?
- Measurement and control technology — L series fittings for impulse lines
- Hydraulics — L series fittings, up to PN 315
- Pharmaceutical, paint and paper industries — L series fittings
- Hydrogen systems — H2-Lok fittings
- Compressed air and laboratory — LL series fittings
How do we supply SCHWER Fittings in Romania?
We can quote SCHWER Fittings stainless steel cutting ring fittings, threaded fittings, couplings and valves. For a correct quotation, send the series or the code from the part, the outside diameter of the tube, the thread and its standard, the material and the working pressure; for threaded fittings, state whether it is G, R/Rp or NPT. Delivery is to order, normally in 1–4 weeks, and an item can ship in 24–72 h when the item is in stock, locally or at the supplier. The quotation confirms the lead time.
For codes in the request that do not match a series exactly, we confirm in the quotation which item fits, based on the thread and the diameter.
Frequently asked questions about SCHWER Fittings
What are the LL, L, S and H2-Lok series at SCHWER Fittings?
SCHWER Fittings makes stainless steel fittings: cutting ring fittings, threaded fittings, cone couplings, double ferrule fittings, ball valves, hose fittings and tubes. The company is based in Denkingen, Germany, and has been active since 1995. LL is for low pressure, up to PN 100, L goes up to PN 315, S is for high pressure, PN 250–400, and H2-Lok is a double ferrule fitting for hydrogen systems.
How do I choose between the LL, L and S series?
The LL series is for low pressures, up to PN 100, the L series for pressures up to PN 315, and the S series for high pressure and vibration, as a rule PN 250–400. Send the working pressure, the tube diameter and the material, and we check the suitable series.
Do you supply SCHWER Fittings in Romania, and how fast?
Yes. SCHWER fittings are ordered, and the normal lead time is 1–4 weeks. Items can ship in 24–72 h when the item is in stock, locally or at the supplier. Large quantities and special parts may need a longer lead time.
Can I combine SCHWER fittings with an existing cutting ring fitting?
Yes, if the fitting standard, the series and the tube diameter match. Fittings with a 24° cone to EN ISO 8434-1 have the same geometry, but the series must match the pressure. Send a photo and the markings of the part, and we check compatibility.
What should I send for a threaded fitting in the -7 or -4i version?
Send the type of part (nipple, reducer, elbow), the thread and its standard (G, R/Rp or NPT), the size, the material and the pressure. For threaded fittings, also state whether you want the version machined from solid material or the cast one. Version -7 is machined from solid 1.4571, and -4i is investment cast in 1.4408.
How do I request a SCHWER Fittings quotation?
Send the SCHWER Fittings code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Schwer Fittings GmbH (manufacturer documentation)

