Spirax Sarco Thermal supplier in Romania
Specialists in steam and thermal systems
Founded in 1888 · Headquarters: Cheltenham, United Kingdom
Who is Spirax Sarco Thermal and what does it make?
Spirax Sarco specialises in industrial steam technology — steam generation, distribution, control and condensing — with a wide range of equipment for these applications. From steam traps, which discharge condensate without losing live steam, to fully automated pressure-reducing stations, to plate or tubular heat exchangers, everything is designed with a deep understanding of thermodynamics and a strong focus on energy efficiency.
Spirax Sarco equipment is commonly used in a variety of industries — food processing, textiles, chemicals, pharma — where users appreciate the systems approach. It is not just a steam trap — the manufacturer's approach covers the whole steam network: losses (leakage at failed traps, incompletely returned condensate, pressure that is too high where it is not needed) and integrated solutions, with fuel savings documented by the manufacturer.
Engineering quality stands out: TD thermodynamic traps with a super-polished stainless steel disc, designed for low long-term maintenance; pilot-operated regulators that keep pressure almost constant even with large flow variations; plate heat exchangers with high thermal efficiency. Spirax Sarco provides technical documentation (manuals, standards, calculations) and training for engineers, under the manufacturer's conditions.
What do we supply from the Spirax Sarco Thermal range?
| Product | Description |
|---|---|
| Steam Traps - TD/FT series | Spirax Sarco steam traps discharge the condensate formed in steam systems while keeping live steam in the system — essential for efficiency and safety. The TD (thermodynamic) series with a stainless steel disc — robust design, works in any position, resistant to water hammer and frost, ideal for distribution lines and general equipment. The FT (float trap) series with a spherical stainless steel float — continuous discharge of condensate as it forms, ideal for heat exchangers and drip legs where the condensate volume is large. For equipment with frequent start/stop (autoclave, press, batch dryer) there are balanced-pressure thermostatic steam traps. All available with BSP/NPT threaded or PN16/40 flanged connections, with cast iron, carbon steel or 316L stainless steel body material for aggressive applications. Factory tested; conformity documentation is confirmed per model. |
| Steam Pressure Regulators - 25P/DP series | Spirax Sarco regulators control steam pressure to the level each piece of equipment needs, reducing the high network pressure (8-16 bar) to the optimum working pressure (2-6 bar) — equipment protection. The 25P series is pilot-operated with internal pilot (self-contained) — it needs no external energy source and keeps pressure almost constant even with large flow variations. Applications: pressure reduction for process equipment (reactors, furnaces, autoclaves), protection of delicate equipment (plate heat exchangers) against excessive pressure, pressure stabilisation under flow variations (production lines with intermittent consumption). Horizontal or vertical installation, optional accessories: downstream pressure gauge, condensate separation before the regulator, manual bypass for maintenance. |
| Plate Heat Exchangers - EasiHeat series | Spirax EasiHeat plate heat exchangers transfer heat from steam to water or other liquids with high efficiency (over 95%) thanks to the large exchange surface in a compact volume and the high turbulence in the plate channels. Construction: painted carbon steel frame, AISI 316L stainless steel plates pressed with a chevron profile for maximum turbulence, NBR or EPDM gaskets depending on the application. Steam condenses on one side of the plates, giving up latent heat at constant temperature — ideal for uniform heating. Applications: domestic hot water (DHW) heating in hospitals and hotels, heating of thermal fluid in industrial processes, pasteurisation and sterilisation in food & beverage. Advantages over tubular exchangers: compactness, high efficiency, ease of maintenance (undo the frame bolts and clean the plates), extensibility (add plates for higher output). Automatic control through a modulating steam valve, pilot-controlled by a downstream temperature sensor. |
| Steam Separators and Strainers - S series | Spirax Sarco S series separators remove water droplets from steam before sensitive equipment (turbines, superheaters, process equipment) — essential for steam quality and equipment protection. Principle: wet steam enters the cylindrical chamber tangentially, centrifugal force pushes the water droplets and particles towards the wall, where they collect and are discharged through a steam trap, while dry steam leaves through the centre. Separation efficiency, maximum pressure and temperature depend on the model and are confirmed from the Spirax Sarco documentation. The models differ in material (ductile iron, carbon steel, stainless steel) and connections. Integrated upstream strainer with stainless steel mesh to stop particles of 100-500 μm — protects control valves and downstream equipment. PN16/40/100 flanged connections; conformity documentation for high pressure is confirmed per model. Critical applications: steam turbines (impurities erode the blades), orifice-plate flow measurement equipment (condensate falsifies the measurement), sterilisation processes (steam must be perfectly dry and clean). |
Why Spirax Sarco Thermal?
- Extensive expertise in steam technology — over a century of activity and continuous development
- Energy efficiency — Spirax systems aim to reduce fuel consumption by eliminating steam losses
- High reliability and durability — products designed for long operation in harsh conditions
- Technical support — documentation, training and services provided by the manufacturer, under its conditions
- Range of solutions — from steam generation to use and condensate recovery, all from a single supplier
- Certificates and technical documentation provided on request, depending on the model
Which Spirax Sarco Thermal codes and series are requested most often?
| Code | Description |
|---|---|
| TD42L | Thermodynamic steam trap for low condensate loads (steam pipe drainage) |
| TD42H | Thermodynamic steam trap for process condensate loads |
| TD52 | Thermodynamic steam trap, standard construction |
| TD62LM | Thermodynamic steam trap with replaceable seat, flanged |
| TD62M | Thermodynamic steam trap with replaceable seat, threaded or welded |
| TD120M | High-pressure thermodynamic steam trap with replaceable seat |
| TDC46M | Carbon steel thermodynamic steam trap with maintainable seat |
| TDS46M | Stainless steel thermodynamic steam trap with maintainable seat |
| TDA52 | Thermodynamic-based liquid drainage variant |
| TDT | Thermodynamic trap for tracing applications (tracer) |
| BTD52L | Thermodynamic steam trap for the food industry |
| UTD42L | Universal thermodynamic steam trap, small version |
| UTD52 | Universal thermodynamic steam trap, standard series |
| FT15 | Float and thermostatic steam trap, cast iron |
| FT30 | Float and thermostatic steam trap, cast iron, medium size |
| FT75 | Float and thermostatic steam trap, cast iron, high capacity |
| FT450 | Cast steel steam trap, DN80/DN100 |
| FT46 | Stainless steel float steam trap, DN15-DN50 |
| FTC23 | Carbon steel float steam trap, for high pressure |
| FTS14 | Austenitic stainless steel float steam trap |
| FTS300 | Large stainless steel steam trap |
| IFT14 | Float steam trap with integrated Spiratec sensor |
| UFT32 | Sealed stainless steel float steam trap |
Where is Spirax Sarco Thermal equipment used?
- Food & Beverage (breweries, dairy, canning)
- Pharmaceutical (sterilisation, drying, reactions)
- Textiles (dyeing, finishing, pressing)
- Pulp & Paper (digesters, dryers)
- Chemicals and petrochemicals (reactors, distillation)
- Oil & Gas (preheating, stripping)
- Hospitals (sterilisation, laundries, heating)
- Laundries (industrial washing, ironing)
- District heating (heating stations)
- Automotive (surface treatment, painting)
How do we supply Spirax Sarco Thermal in Romania?
We supply Spirax Sarco equipment (steam traps, pressure regulators, heat exchangers) to order. Availability is confirmed in the quotation; for technical data we refer to the Spirax Sarco technical documentation. As a general rule, some items can ship in 24–72 h when the item is in stock, locally or at the supplier, while the other configurations are usually supplied in 1–4 weeks to order, with the availability of each model confirmed in the quotation. For an accurate proposal we need the steam pressure and flow, the working temperature and the type of application (exchanger, pressure reduction, condensate discharge). We come back with the lead time confirmed by the supplier and the full specifications.
An energy audit certified directly by the manufacturer is outside our offer; for each steam trap or regulator model, availability is checked on each request.
Frequently asked questions about Spirax Sarco Thermal
Which Spirax Sarco steam trap should I choose for a medium-pressure steam line?
For medium pressures on a standard steam line, the TD52 or TD62M thermodynamic series covers most current industrial applications. For higher pressures, where a wear-resistant replaceable seat is needed, the TD120M model is the right choice thanks to its high-pressure construction.
What is the difference between Spirax Sarco float and thermodynamic steam traps?
Float and thermostatic traps, such as the FT series, discharge condensate continuously as it forms, which suits applications where the condensate flow varies often. Thermodynamic traps, such as the TD series, work with a single moving disc and are more compact, recommended for steam lines where installation space is limited.
Do you supply Spirax Sarco steam traps in Romania?
Yes, we supply Spirax Sarco steam traps to order, from the ranges published by the manufacturer. The lead time to order is usually 1–4 weeks, depending on the model and the body material. We recommend confirming the exact code, including the working pressure, before ordering.
What information should I send for a Spirax Sarco steam trap quotation?
It helps to state the working pressure of the installation, the desired material for the trap body (cast iron, carbon steel or stainless steel), the estimated condensate flow and the connection type (flanged, threaded or welded). These details make it possible to choose correctly between the TD and FT series or special variants such as FTC or UFT.
What is the Spirax Sarco IFT14 steam trap?
It is a float steam trap that integrates a Spiratec sensor, used to monitor the operation of the trap and detect steam losses or blockages. It is useful in installations where the correct operation of each steam trap must be checked without constant manual intervention in the field.
How do I request a Spirax Sarco Thermal quotation?
Send the Spirax Sarco Thermal code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Spirax Sarco, Wikipedia (manufacturer documentation)

