Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Tassalini supplier in Romania

For Tassalini we quote diaphragm valves 57KE25, 58WE25, 58KE25 and 60KE25, manual and pneumatic butterfly valves DN 25–DN 250, sampling valves, sight glasses, spray balls and stainless steel filters; we need the code, the diameter and the connections.

Headquarters: Peschiera Borromeo, Italy

Request a quote

Who is Tassalini and what does it make?

Tassalini is an Italian manufacturer of stainless steel valves and fittings for installations with sanitary requirements, based in Peschiera Borromeo. The range includes diaphragm valves, butterfly valves, ball valves, pneumatic valves, sampling valves, sight glasses and filters, spray balls, control units and flow control, safety and check valves.

The diaphragm valves, for example 57KE25 manual, 58WE25 and 58KE25 with normally closed pneumatic actuator, and 60KE25 with control unit, have an AISI 316L stainless steel body, a standard food-grade EPDM diaphragm and a finish with a roughness of at most 0.8 µm. The construction is sanitary, self-draining during CIP cleaning, and access to the internal parts is possible without removing the valve from the installation.

The butterfly valves are made in manual and pneumatic variants, in diameters from DN 25 to DN 250, with 304L or 316L stainless steel body, 316L disc and standard food-grade silicone gaskets, with EPDM or PTFE on request. The 900 series is fully drainable, and the 800 series offers discs and gaskets for special requirements. For a quotation, the code, diameter, connection type, gasket and actuator matter. On the pneumatic butterfly valves, a proximity sensor, a microswitch, a solenoid valve and a connector are available as accessories, and the actuators can be horizontal or vertical, single or double acting, including with flow adjustment. The flanges of the butterfly valves are interchangeable.

What do we supply from the Tassalini range?

ProductDescription
Diaphragm valves 57KE25, 58WE25, 58KE25, 60KE25Sanitary construction with AISI 316L body and EPDM diaphragm. 57KE25 is manual, 58WE25 and 58KE25 have a normally closed pneumatic actuator, and 60KE25 adds a control unit. They drain by themselves during CIP cleaning.
Manual and pneumatic butterfly valvesEL and EF variants, with handle or vertical or horizontal pneumatic actuator, single or double acting. DN 25–DN 250, maximum working pressure of 7 bar, finish of at most 0.8 µm, interchangeable flanges.
Pneumatic valves, series 900 and 800Series 900 is fully drainable, and the internal part is accessed at CIP. Series 800 offers discs and gaskets for special requirements. The bodies allow shut-off or diverting configurations with 2, 3 or 5 ways.
Sampling valves, sight glasses, spray balls and filtersThey complete sanitary installations: sampling valves, filters and sight glasses, spray balls for tanks, control units, ball valves and pressure or vacuum valves, all in stainless steel.

Why Tassalini?

  • 316L stainless steel body and finish with a roughness of at most 0.8 µm — surfaces that are easy to clean in installations with sanitary requirements
  • Food-grade EPDM diaphragm, with PTFE on request — the elastomer suits the fluid and the process temperature
  • Self-draining at CIP and access to the interior without removal — maintenance without a long line shutdown
  • Butterfly valves from DN 25 to DN 250, manual or pneumatic — the diameter and the control are chosen according to the installation
  • Valves, sight glasses, spray balls and sampling valves in the same family — a sanitary line can be completed from the same series

Which Tassalini codes and series are requested most often?

CodeDescription
57KE25TC diaphragm valve, manual
58WE25EL diaphragm valve, NC pneumatic actuator
58KE25TC diaphragm valve, NC pneumatic actuator
60KE25TC diaphragm valve, NC pneumatic actuator and control unit
7M6 711L52+7M6L2576EL butterfly valve, manual with micrometric handle
7M11 711L52+7M11L2576EL butterfly valve, manual with handle
SE K100BV51+7C10L25-52EL butterfly valve with vertical pneumatic actuator
SE 711L52+7C4L25-52EL butterfly valve with vertical pneumatic actuator
DE 722D50+7C1L63-85EF butterfly valve with horizontal pneumatic actuator
Series 800Pneumatic valves with various discs and gaskets
Series 900Fully drainable pneumatic valves, 3-A compliant

Where is Tassalini equipment used?

  • Sanitary piping — shut-off and diversion with butterfly and diaphragm valves
  • Lines with CIP cleaning — self-draining valves and spray balls
  • Process tanks — spray balls, sight glasses and sampling valves
  • Stainless steel installations — filters, ball valves and flow control valves

How do we supply Tassalini in Romania?

We can quote Tassalini sanitary valves and fittings: diaphragm valves, butterfly valves, sampling valves, sight glasses, spray balls and control units. For an accurate quotation, send the complete code from the body or the nameplate, the nominal diameter, the connection type, the gasket material, the fluid and the process temperature, and the type of control, manual or pneumatic. For a replacement, a photo of the valve helps. We supply to order, usually in 1–4 weeks; the exact lead time is confirmed in the quotation.

For special combinations of gasket, actuator or connection we confirm the exact variant in the quotation, based on the process data we receive from you.

Frequently asked questions about Tassalini

What are the 57KE25 valves and the 800 and 900 series in the Tassalini range?

57KE25 is a TC diaphragm valve, manual, and the 800 and 900 series are pneumatic valves. Tassalini makes stainless steel valves and fittings for installations with sanitary requirements: diaphragm, butterfly, ball, pneumatic and sampling valves, sight glasses, filters, spray balls and control units. The headquarters is at Peschiera Borromeo, in Italy.

How do I choose between the diaphragm valve and the butterfly valve?

The diaphragm valve isolates the fluid well and drains by itself, so it suits clean lines with CIP. The butterfly valve is more compact and is used for shut-off or diversion on large diameters. Send the fluid, the diameter, the pressure and the temperature, and we check the type.

Do you supply Tassalini in Romania, and how quickly?

Yes, Tassalini valves are supplied to order, usually in 1–4 weeks. An item can ship in 24–72 h when the item is in stock, locally or at the supplier. Variants with special gaskets or actuators may have a longer lead time, stated in the quotation.

Can I change the gasket or the diaphragm of an existing valve?

Yes, if we identify the valve. Send the code or type (for example 58KE25 or EL), the diameter and the current material, EPDM, silicone or PTFE. The standard diaphragm is food-grade EPDM, and PTFE is available on request, so we check the variant that suits the fluid.

How do I order a 57KE25 or 58WE25 diaphragm valve?

For a 57KE25 or 58WE25 send the complete code, the nominal diameter (DN or inches), the connection type, the fluid, the working pressure and temperature, the gasket material and the control required: manual or pneumatic, normally closed or normally open. A photo of the existing valve helps with confirmation.

How do I request a Tassalini quotation?

Send the Tassalini code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Tassalini S.p.A. (manufacturer documentation)