Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Seneca supplier in Romania

Dataloggers, data acquisition and signal conditioners

Headquarters: Padova, Italy

Request a quote

Who is Seneca and what does it make?

Seneca is an Italian manufacturer of industrial automation and data acquisition equipment, based in Padova. The range covers input/output modules for CANopen, EtherNet/IP, Modbus and PROFINET networks, programmable controllers conforming to IEC 61131-3, dataloggers and IoT gateways for remote control, as well as signal isolators, temperature transmitters and electrical network analysers. For the Romanian market we can quote from the range of signal isolators, data converters and acquisition modules for industrial automation.

What sets Seneca apart is the breadth of the range under a single brand: from simple Z and K series signal isolators to complete remote-control platforms with 2G/4G dataloggers and Z-PASS type gateways that send field data to a central system through its in-house LET'S platform. The R204 network analysers have approvals per the manufacturer's documentation, and the S500 energy meters and T201 current transducers complete the electrical measurement segment. The company thus covers both local process automation and remote monitoring.

For customers in Romania, Seneca makes sense in automation panels where galvanic isolation is required for analogue signals, in remote-control installations for distant stations without permanent staff, and in electricity consumption monitoring projects where metering must be transmitted to a central system.

What do we supply from the Seneca range?

ProductDescription
Z and K series signal isolatorsGalvanic isolation modules for analogue process signals (4-20 mA, 0-10 V, thermocouple, RTD), DIN rail mounted, available in a configurable multi-standard version (Z series) and a compact version with a reduced form factor (K series). They protect process instrumentation from electrical disturbances and potential differences between equipment installed at a distance. They are frequently used between field transmitters and programmable controllers in industrial control panels.
Z-PASS1/Z-PASS2 remote-control gatewaysIoT gateways for sending data from remote installations to a central system, with a 4G+ modem and integration with the in-house LET'S platform for remote control and remote assistance. They collect signals from local sensors and I/O modules and send them periodically or on an event, useful for pumping stations, measuring points or equipment without permanent staff on site. Configuration is done through dedicated software, without complex programming for standard cases.
R204 network analyser and S500 energy metersR204 is an electrical network analyser, used to monitor power quality parameters — voltage, current, power, harmonics — in industrial electrical panels. The S500 series completes the segment with energy meters dedicated to internal billing by cost centre, while the T201 current transducers and Rogowski sensors allow measurement without interrupting the circuit. Together they cover both power quality analysis and consumption metering by section or equipment.

Why Seneca?

  • A wide range of signal isolators, IEC 61131-3 controllers, dataloggers and electrical network analysers under the same brand
  • Z-PASS gateways with a 4G+ modem for remote control, with an in-house LET'S platform for transmitting field data
  • R204 network analyser with approvals per the manufacturer's documentation, relevant for projects with North American requirements
  • Support for multiple industrial protocols — CANopen, EtherNet/IP, Modbus RTU/TCP-IP and PROFINET — in the same ecosystem
  • Energy meters and current transducers dedicated to real-time monitoring of electricity consumption

Which Seneca codes and series are requested most often?

CodeDescription
Z-PCmultifunction controller IEC 61131-3
Z-PASS1-RTIoT gateway (IIoT Edge Gateway) with 4G+ modem for remote control
Z-PASS2-RTextended IoT gateway for remote control
Z-KEYrouter/gateway for communication network
MyALARM2datalogger with remote alarming
Z-LTE-CEIGSM/GPRS datalogger with integrated modem, for remote alarm and data recording
R204electrical network analyser
S500electricity meter
T201current transducer
Z series isolatorsmulti-standard signal isolator
K series isolatorscompact signal isolator
S series transmitterstemperature transmitter for RTD/thermocouple
S series indicatorsdigital process indicator
MY seriesportable measuring system
TAA/TACcurrent transformer for measurement

Where is Seneca equipment used?

  • Industrial automation — signal isolators and I/O modules
  • Energy and utilities — network analysers and energy meters
  • Water and water treatment — remote control for unattended stations
  • Agriculture — remote monitoring through IoT gateways
  • Food industry — process data acquisition

How do we supply Seneca in Romania?

For Seneca we rely on the manufacturer's technical documentation; availability is confirmed in the quotation. We supply signal isolators, remote-control gateways and electrical measuring instruments to order, usually within 1–4 weeks of the manufacturer's confirmation. For a quotation, send us the type of signal to be isolated or the communication protocol used, the number of channels needed and, for gateways, the connectivity type (2G/4G) required. Project-specific configured versions are supplied to order.

Configuration of the LET'S software platform for remote control is a service of the manufacturer or of the system integrator.

Frequently asked questions about Seneca

What products does Seneca make?

Seneca makes industrial automation and data acquisition equipment — signal isolators, programmable controllers, dataloggers, remote-control gateways and electrical measuring instruments — made in Italy, in Padova.

How do I choose the right Seneca signal isolator?

The choice depends on the type of input signal (4-20 mA, 0-10 V, thermocouple or RTD) and the number of channels needed. Send us the signal type, the value range and whether you need multi-standard or compact DIN mounting isolation.

Do you supply Seneca equipment in Romania, and how quickly?

Yes, we supply Seneca isolators, gateways and measuring instruments to order, usually in 1–4 weeks, depending on the manufacturer's availability.

What do I need to send for a quotation for Seneca equipment?

We need the type of signal or protocol used and the number of channels; for remote-control gateways, also the connectivity type required and the data transmission frequency.

How do I request a Seneca quotation?

Send the Seneca code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Seneca s.r.l. (manufacturer documentation)