Who is Sensonics and what does it make?
Sensonics is a British company founded in the early 1970s, so with more than five decades of activity, specialised in monitoring vibration, shaft displacement, speed and seismic movement on critical rotating machinery. It designs and makes its own sensors and processing modules, and so offers everything from the transducer mounted on the bearing housing to the protection system, with compliance with the applicable standards stated in the manufacturer's documentation. Typical fields of use are power plants, oil and gas installations, nuclear sites, metallurgy and mining, that is, places where a turbine, a large pump or a compressor must be stopped automatically before a failure.
The central platform is Sentry G3, a modular machinery protection system in which each channel is programmed independently for vibration, position, temperature or speed, with alarm relays, analogue outputs and digital communication in the same module. DN26 G3 is a programmable two-channel monitor for absolute vibration, shaft vibration or position, plus a third channel for speed or phase reference. For simpler installations there are transducers with a 4–20 mA output, for example DNX8031 for shaft vibration in oil-film bearings and DNX8033 for axial shaft position.
The range is used for retrofitting turbine monitoring loops, for replacing proximity probes or velocity transducers, and in projects that require overspeed protection. In a request, it must be clarified whether the replacement is made in the same system or with a new module, how long the measurement chains are, what zone classification the installation location has and what integrity level is required for protection.
What do we supply from the Sensonics range?
| Product | Description |
|---|---|
| Sentry G3 | Modular machinery protection and condition monitoring system, compliant with API 670. Each module has four programmable channels for vibration, position, temperature and speed, with alarm relays, analogue outputs and digital communication. |
| DN26 G3 | Programmable protection monitor, with two channels for absolute vibration, shaft vibration or shaft position, plus a third channel for speed or phase reference. Suited to OEM applications, with easy integration. |
| DNX8031 and DNX8033 | Loop-powered transducers with a 4–20 mA output. DNX8031 measures shaft vibration up to 0–250 µm peak to peak, and DNX8033 axial position between –1.0 and +1.0 mm, for motors, pumps, compressors and steam turbines. |
| PZDC and VEL/GDC | Velocity transducers with a 4–20 mA output for absolute casing vibration: PZDC is piezoelectric and small, VEL/GDC has a moving coil and an additional dynamic signal. Ranges from 0–15 mm/s RMS up to 0–100 mm/s RMS. |
Why Sensonics?
- Sentry G3 platform with programmable channels — the same module can measure vibration, position, temperature or speed, so the stock of modules stays small
- Protection systems designed for turbines and critical machinery — dual redundant power supply and functional safety versions, with compliance with the applicable standards stated in the manufacturer's documentation
- 4–20 mA transducers for direct integration — DNX8031 and DNX8033 go into a DCS or PLC without an intermediate monitor
- In-house sensors for extreme conditions — piezoelectric, moving-coil and proximity solutions, with versions for high temperature, pressure and radiation
- Seismic monitoring and speed supervision — SA seismic switches, the PRA-103 accelerograph and speed monitors with online testing
Which Sensonics codes and series are requested most often?
| Code | Description |
|---|---|
| Sentry G3 | Modular machinery protection system, four programmable channels per module |
| DN26 G3 | Programmable two-channel monitor with a third channel for speed |
| DN26 G3 Tacho Monitor | Single-channel speed monitor option |
| Senturion X | Systems with a proximity probe and directly processed outputs |
| DNX8031 | 4–20 mA shaft vibration transmitter, up to 0–250 µm |
| DNX8033 | 4–20 mA axial position transmitter, –1.0 to +1.0 mm |
| PZDC | Piezoelectric velocity transducer, 4–20 mA loop |
| VEL/GDC | Moving-coil velocity transducer, 4–20 mA loop, with dynamic output |
| CS | Capacitive sensor for air-gap measurement on hydro generators |
| SA series | Triaxial seismic switches for structure protection |
| PRA-103 | Standalone peak-response accelerometer, with mechanical recording |
Where is Sensonics equipment used?
- Power generation — turbine supervision and overspeed protection
- Oil and gas — monitoring of critical compressors and pumps
- Nuclear — plant condition instrumentation and seismic protection
- Metallurgy and mining — vibration transducers on heavy machinery
- Hydropower — air-gap measurements on generators with CS capacitive sensors
How do we supply Sensonics in Romania?
We can take requests for Sensonics sensors and modules, from velocity transducers to components of the Sentry G3 system, provided you send the code from the existing part. Supply is to order; for standard parts the lead time is typically 1–4 weeks, while for configured protection systems the lead time may be longer and is confirmed in the quotation. For an accurate quotation add the machine type, the measurement chain (probe, cable, driver, monitor), the Ex zone classification, the supply voltage, the outputs required and, where relevant, the SIL level needed.
The manufacturer's support for an older Sensonics system and its compatibility with monitors of other brands are established on the exact model.
Frequently asked questions about Sensonics
What does Sensonics make?
Sensonics, based in the United Kingdom, makes vibration, displacement and speed sensors, proximity probes, LVDTs, machinery protection systems (Sentry G3), with compliance with the applicable standards stated in the manufacturer's documentation, and seismic monitoring equipment. The company has been active since the 1970s and works with energy, oil and gas, nuclear and heavy industry.
How do I choose between a 4–20 mA transducer and a Sentry G3 system?
A transducer such as DNX8031 or PZDC is chosen when the signal goes directly into a DCS or PLC, for assets of medium or low criticality. A Sentry G3 system is justified for the protection of critical machinery, with voted alarms and trip, redundancy and, where needed, functional safety versions, according to the manufacturer's documentation. Send us the machine type and the criticality level.
Do you supply Sensonics equipment in Romania, and how long does it take?
Yes, to order. Standard parts typically take 1–4 weeks to order, while configured protection systems and those for Ex zones may take longer. The lead time is fixed in the quotation, after the configuration is checked.
Can I replace an old proximity probe or velocity transducer?
It depends on the sensitivity, the length of the measurement chain, the connector type, the Ex zone and the monitor it connects to. Equivalence is established from the datasheet. Send us the code from the probe or transducer, a photo of the nameplate and the model of the existing monitor, so we can check the fit.
What details should I send for a quotation on turbine protection?
The type of turbine or machine, the number and type of measurement points (vibration, axial position, speed), the outputs required, the supply, the zone classification and the SIL level wanted. If you are replacing an existing system, add the model and the diagram of the measurement chain.
How do I request a Sensonics quotation?
Send the Sensonics code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: Sensonics Ltd (manufacturer documentation)

