Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Serfilco supplier in Romania

Pumps and filtration systems for industrial liquids

Headquarters: Northbrook, Illinois, United States

Request a quote

Who is Serfilco and what does it make?

Serfilco is an American manufacturer of industrial pumps and liquid filtration systems, based in Northbrook, Illinois. The range covers horizontal transfer pumps, vertical tank-mounted pumps, magnetic drive pumps and diaphragm pumps, alongside filter chambers, sand filters and complete purification systems with activated carbon or resins. For the Romanian market we can quote from the range of thermoplastic and stainless steel pumps for chemical transfer and surface treatment.

What sets Serfilco apart is the combination of end-suction centrifugal pumps and complete filtration lines, both built from chemically resistant materials (CPVC, PVDF, polypropylene or 316 stainless steel) for corrosive environments in surface and water treatment. The horizontal HC, HE and HF series cover flow rates from 10 to 400 gallons per minute (approx. 2.3–91 m³/h), while the vertical tank-mounted series, from EO to EHM, reach up to 650 gallons per minute, depending on material and size.

For surface treatment workshops, galvanising lines and water treatment plants, Serfilco means access to pumps and filters built from the same material as the chemical baths they serve, which reduces the risk of premature corrosion. Choosing the right series depends on the flow rate required and the chemical compatibility of the material.

What do we supply from the Serfilco range?

ProductDescription
HC / HE / HF Series Horizontal Transfer PumpsA family of horizontal end-suction centrifugal pumps, available in CPVC, PVDF or other chemically resistant materials, for transferring acids, bases and surface treatment solutions. The HC series covers flow rates of 10-70 gallons per minute, HE reaches 175 gallons per minute, and HF 400 gallons per minute, for installations with higher requirements. The customer must confirm the flow rate, the material compatible with the fluid and the seal type (single or double) before the quotation.
EO / EH / EHM Series Vertical Tank-Mounted PumpsVertical pumps fitted directly on the tank edge, with variable column lengths to suit the depth of the tank, with no separate floor foundation. The EO series covers low flow rates, from 2 gallons per minute, while the EHM reaches 650 gallons per minute for large treatment tanks. They are frequently used on galvanising, pickling and chemical washing lines. The customer must provide the tank depth and the flow rate required so the column length can be chosen.
B / HB Series Vertical Sump PumpsVertical CPVC pumps for draining or recirculating liquids from a sump or collection tank, with flow rates from 20 to 350 gallons per minute depending on the series. The chemically resistant plastic construction makes them suitable for environments with variable concentrations of acids or diluted bases. The customer must confirm the flow rate required and the installation depth so the correct pump length can be chosen.

Why Serfilco?

  • Pumps and filters in chemically resistant materials (CPVC, PVDF, polypropylene or 316 stainless steel) for corrosive environments
  • Wide range of flow rates, from 2 gallons per minute for the small pumps up to 1,200 for the HA series
  • Vertical tank-edge-mounted series, with no separate foundation, for surface treatment tanks
  • Complete filtration systems with activated carbon, resins or sand filters, as well as individual pumps
  • Headquarters in Northbrook, Illinois, with in-house moulding of plastic parts and metalworking

Which Serfilco codes and series are requested most often?

CodeDescription
HChorizontal CPVC/PVDF pump, flow rate 10-70 gpm
HHhorizontal CPVC/PVDF pump, flow rate 10-60 gpm
G Pumphorizontal Noryl/PPS pump, flow rate 10-100 gpm
SPhorizontal cast iron pump, flow rate 20-140 gpm
I Pumphorizontal stainless steel/PP/PE/PPS pump, flow rate 15-150 gpm
HEhorizontal multi-material pump, flow rate 20-175 gpm
S Pumphorizontal PP/PPS/PE pump, flow rate 20-225 gpm
HFlarge horizontal pump, flow rate 50-400 gpm
HCIhorizontal cast iron/316 stainless steel pump, flow rate 10-160 gpm
HAhorizontal CPVC pump, flow rate 100-1200 gpm
HSShorizontal cast 316 stainless steel pump, flow rate 10-160 gpm
EO 3/4small vertical pump, flow rate 2-22 gpm
EO 1vertical pump, flow rate 10-55 gpm
EO 1 1/4vertical pump, flow rate 20-90 gpm
EHmulti-material vertical pump, flow rate 20-175 gpm
EHLXEH version with extended length, flow rate 20-175 gpm
EFvertical pump, flow rate 50-400 gpm
EFBvertical CPVC pump, fixed flow rate 400 gpm
EHMvertical CPVC pump, flow rate 60-650 gpm
HBvertical CPVC sump pump, flow rate 20-140 gpm
B Sumpvertical CPVC sump pump, flow rate 50-350 gpm
ESSvertical cast 316 stainless steel pump, flow rate 15-150 gpm
ECIvertical cast iron pump, flow rate 15-150 gpm

Where is Serfilco equipment used?

  • Surface treatment: recirculation and filtration for galvanising and pickling baths
  • Water treatment: pumping and filtration for industrial purification installations
  • Chemical manufacturing: transfer of acids and bases with chemically resistant pumps
  • General industry: pumping for process fluids
  • General industry: pumps and filters for process fluids

How do we supply Serfilco in Romania?

We supply Serfilco pumps for surface treatment, water treatment and chemical manufacturing, through supply channels in the EU and the USA; we supply to order, usually in 1–4 weeks, as such a varied range of materials is not kept on the shelf. We rely on the information in the manufacturer's documentation; exact availability is confirmed in the quotation. For a correct quotation we need the series required, the flow rate, the material compatible with the processed fluid and the mounting type.

Lead times for spare parts specific to each filtration series are given in the quotation, on a specific request.

Frequently asked questions about Serfilco

What products does Serfilco make?

Serfilco makes horizontal and vertical industrial pumps in chemically resistant materials, plus filtration systems (filter chambers, sand filters, activated carbon or resin filter media). The range is designed for surface treatment, water treatment and the transfer of corrosive chemicals in industrial installations.

How do I choose the right Serfilco pump for a surface treatment tank?

You need the tank depth, the flow rate required and the fluid type (acid, base or neutral solution) to choose the right material: CPVC, PVDF or 316 stainless steel. Vertical tank-edge-mounted pumps are chosen by the column length needed for the tank depth.

What is the difference between the Serfilco EH and EHM series?

The EH series covers flow rates of up to 175 gallons per minute, while the EHM reaches 650, for larger tanks or circuits with intensive recirculation. Both are vertical tank-edge-mounted pumps, available in chemically resistant materials.

Do you supply Serfilco pumps in Romania, and how quickly?

Yes, we supply Serfilco pumps and filtration systems to order, usually in 1–4 weeks, depending on series and material. This range is supplied to order, as the equipment is configured to the customer's tank and fluid.

What should I send for a Serfilco pump or filter quotation?

Send the series or type of equipment required, the flow rate needed, the material compatible with the processed fluid and, for filtration systems, the type of contaminant you want to remove. With these data we identify the right version from the range.

How do I request a Serfilco quotation?

Send the Serfilco code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 20 November 2026 · Sources: SERFILCO, Ltd. (manufacturer documentation)