Verder supplier in Romania
In the Verder range we quote Dura series peristaltic hose pumps, Rapide and Vantage peristaltic tube pumps and Verderair air-operated diaphragm pumps; send the pump code or a photo of the nameplate and we will come back with a quotation.
Founded in 1959 · Headquarters: Vleuten, the Netherlands
Who is Verder and what does it make?
Verder Liquids makes two families of pumps for difficult fluids: Verderflex peristaltic pumps, with hose (Dura, VF) or tube (Rapide, Vantage), and Verderair double diaphragm pumps, air-operated (AODD) or electrically operated (EODD). In peristaltic pumps the fluid comes into contact only with the inside of the hose or tube, and in diaphragm pumps only with the chambers and diaphragms, which is why they are chosen for abrasive slurries, viscous fluids or contamination-sensitive products. They are used in mining, water and wastewater treatment, and the chemical, food and pharmaceutical industries. For installations in Romania we can quote the pump together with replacement hoses or tubes.
Dura is the hose series for high flow rates: from Dura 5 (23 l/h, 8 bar) to Dura 100 (55 m³/h, 16 bar), self-priming, with unlimited dry running and suction of up to 9.5 m. Rapide is the compact tube pump, for dosing and transfer at a maximum of 2 bar, from R2S (93.6 l/h) to R17S (1,020 l/h). Vantage and Ds500 are the tube pumps for laboratory and precise dosing. Verderair covers the transfer of chemicals, acids and bases, paints and viscous media, with flow rates of up to 1,200 l/min in the VA series.
Verder was founded in 1959 in Vleuten, in the Netherlands. The hose or tube is the main wear part of peristaltic pumps, which is why the pump model and the tube diameter are established before ordering.
What do we supply from the Verder range?
| Product | Description |
|---|---|
| Verderflex Dura Peristaltic Hose Pumps | Dura 5 and Dura 7 dose 23–39 l/h at 8 bar; Dura 10–25 reach 12 bar (up to 2,387 l/h); from Dura 35 upwards the pressure is 16 bar, and Dura 100 transfers 55 m³/h. They are self-priming, can run dry without limit and draw up to 9.5 m. The number in the name shows the size: the maximum particle size is approximately a quarter of the number, in mm (Dura 25 – 6.25 mm, Dura 100 – 25 mm). The maximum temperature rises from 50 °C for Dura 5 and 7 to 100 °C for Dura 60–100. Approvals (for example for food contact or explosive zones) differ by model and are confirmed from the datasheet. They are chosen for slurries, viscous fluids and sensitive products. |
| Verderflex Rapide, Vantage and Ds500 Peristaltic Tube Pumps | Rapide is a compact tube pump, at a maximum of 2 bar and 85 °C, with aluminium housing and IP55 gear motor: R2S 93.6 l/h, R3 230 l/h, R6 380 l/h, R8 470 l/h, R12 840 l/h, R17S 1,020 l/h. The tubes are Verderprene or silicone, and approvals are confirmed from the datasheet. Vantage 3000 (195 l/h, 2 bar) and Vantage 5000 (396 l/h, 7 bar) are casings for dosing and small transfer; Ds500 doses up to 30 l/h at 7 bar. Tube pumps dose with an accuracy of ±2%. |
| Verderair Double Diaphragm Pumps | The VA series reaches 1,200 l/min and 8.6 bar, in metallic and non-metallic constructions. PURE (660 l/min, 7 bar) is for aggressive chemicals, HC-PURE is designed for easy cleaning, HI-CLEAN for hygienic applications (food, dairy, cosmetics), CONT-EX is made of conductive polyethylene (105 l/min), and HP reaches 17.2 bar for feeding filter presses. The electric versions (EODD, for example the second generation with 454 l/min) use a motor instead of compressed air. |
| Verderflex Hoses, Tubes and Consumables | The spare parts range includes hoses and tubes (Verderprene or platinum-cured silicone for hygienic applications), Verderlube and Verdersil lubricants, pulsation dampeners, flow shut-off valves and maintenance and repair kits. The hose or tube is the main wear part, and the exact diameter depends on the installed pump model. |
Why Verder?
- Two pumping technologies for difficult fluids: peristaltic (Verderflex) and double diaphragm (Verderair)
- Dura, 12 sizes from 23 l/h to 55 m³/h, with self-priming and unlimited dry running
- Peristaltic pumps with hose or tube, where the fluid touches only the hose or tube
- Verderair AODD and EODD (electric drive), in industrial and hygienic versions
- Hoses, tubes, lubricants and repair kits in the same range
- Rapide with Verderprene or silicone tubes, for hygienic applications
Which Verder codes and series are requested most often?
| Code | Description |
|---|---|
| Rapide R2S | compact peristaltic pump, maximum flow 93.6 l/h, 2 bar |
| Rapide R3 | maximum flow 230 l/h, maximum pressure 2 bar |
| Rapide R3DC | maximum flow 3.4 l/min, tube up to 9.6 mm, 2 bar |
| Rapide R3S | maximum flow 189 l/h, tube up to 9.6 mm |
| Rapide R5000 | maximum flow 365 l/h, tube up to 9.6 mm |
| Rapide R6 | maximum flow 380 l/h, tube up to 12.7 mm |
| Rapide R7S | maximum flow 375 l/h, tube up to 15.9 mm |
| Rapide R8 | maximum flow 470 l/h, tube up to 12.7 mm |
| Rapide R12 | maximum flow 840 l/h, tube up to 15.9 mm |
| Rapide R17S | maximum flow 1020 l/h, tube up to 19 mm |
| Verderair VA | air-operated diaphragm pump, maximum flow 1200 l/min, 8.6 bar |
| Verderair PURE | version for aggressive chemicals, maximum flow 660 l/min |
| Verderair e-PURE | electrically driven version, maximum flow 100 l/min |
| Verderair HC-PURE | design intended for easy cleaning, maximum flow 465 l/min, 7 bar |
| Verderair HI-CLEAN AODD | hygienic compressed-air version, maximum flow 870 l/min |
| Verderair EODD second generation | electric drive, maximum flow 454 l/min |
| Verderair HI-CLEAN EODD | hygienic electric version, maximum flow 378 l/min |
| Verderair CONT-EX | conductive polyethylene, ATEX certification, maximum flow 105 l/min |
| Verderair HP | high-pressure series, maximum pressure 17.2 bar |
| Verderair Split Manifold | dual-port design, flow 2x30 l/min |
| Verderair Drum Pumps | for emptying drums, maximum flow 61 l/min |
Where is Verder equipment used?
- Mining and ore processing — abrasive slurry transport
- Water and wastewater treatment — reagent dosing and sludge transfer
- Food and beverage industry — transfer of contamination-sensitive products
- Pharmaceutical and cosmetics industry — precision dosing
- Chemical industry — transfer of corrosive or viscous fluids
- Paint industry — transfer with AODD pumps
Verder certifications
- ATEX — CONT-EX series standard; other Verderair series and most Dura models have ATEX certificates
- FDA and USP Class VI — Verderair hygienic line; FDA and EC 1935/2004 — most Dura models
- EC 1935/2004 and CE marking — Verderair industrial line
- For Verder, ATEX and food-contact certificates are confirmed on the datasheet of the model in the quotation
How do we supply Verder in Romania?
We source Verderflex peristaltic pumps and Verderair diaphragm pumps through EU supply channels, starting from the manufacturer's technical documentation — we check availability on each request. For replacement hoses and tubes, the main wear part, the general guide is that an order can ship in 24–72 h when the item is in stock, locally or at the supplier; for complete pump units, lead time is usually 1–4 weeks to order. To identify the right hose or tube, we need the installed pump model, the hose or tube diameter and the fluid handled (abrasive, viscous or contamination-sensitive). Every request is quoted individually.
We check Verder availability for Verderprene hose diameters on request; warranty interventions on installed pumps are handled by the manufacturer.
Frequently asked questions about Verder
How do I recognise the size of a Verderflex Dura pump from its name?
The number in the name increases with the size: Dura 5 gives up to 23 l/h, Dura 25 up to 2,387 l/h, Dura 55 up to 15,300 l/h and Dura 100 up to 55,000 l/h. The maximum particle size in the fluid is approximately a quarter of the number, in mm (Dura 55 – 13.75 mm). The pump nameplate confirms the exact model.
What is replaced periodically on a Verder peristaltic pump and what should I send you for parts?
The main wear part is the hose (on Dura) or the tube (on Rapide and Vantage), and the tubes of Rapide pumps are made of Verderprene or silicone. The range also includes Verderlube and Verdersil lubricants, pulsation dampeners and repair kits. Send the pump model, the number from the nameplate and the tube diameter.
What data do you need to choose between a peristaltic pump and a diaphragm pump?
The fluid and its viscosity, whether it contains solids or is abrasive, the flow rate, the discharge pressure, the temperature and the duty (continuous or intermittent). For explosive-atmosphere zones, also state the zone class, because ATEX certification is confirmed by model.
How long does it take to bring in a Verder pump?
To order, usually 1–4 weeks, depending on the model and on factory availability; we confirm the exact lead time in the quotation. Replacement hoses and tubes can be faster, when the item is available.
How do I request a Verder quotation?
Send the Verder code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 20 November 2026 · Sources: Verder Liquids, Verder Group (manufacturer documentation)

