Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

WPIL supplier in Romania

Vertical, submersible, drainage and fire-fighting pumps

Founded in 1952

Request a quote

Who is WPIL and what does it make?

WPIL is an Indian manufacturer of industrial pumps, active since 1952, with a range covering vertical, horizontal, submersible, engineered and fire-fighting pumps. The portfolio includes vertical turbine pumps for deep wells, split case pumps for large flow rates, multistage pumps for high heads and submersible pumps for drainage and wastewater. For the Romanian market we can quote from the range of high-capacity industrial pumps for municipal and energy projects.

What sets WPIL apart is the wide span of flow rates and powers within the same range: split case pumps reach 15,000 m³/h and 2,000 kW motors, submersible drainage pumps go up to 50,000 m³/h, and multistage pumps reach heads of 650 m. The fire-fighting range covers vertical (500-5,500 GPM) and horizontal (750-5,000 GPM) variants, supplied as packages with a diesel engine and dual electric/air start.

At municipal pumping stations, irrigation projects and power plants, WPIL gives access to pumps sized for high flow rates and heads, where a standard catalogue pump does not meet the requirement. Each product family is chosen according to the application, flow rate and head required.

What do we supply from the WPIL range?

ProductDescription
Horizontal split case pumpsHorizontal axially split case pumps, for flow rates up to 15,000 m³/h and heads up to 200 m, with motors up to 2,000 kW, in single-stage or two-stage configuration. The split casing gives access to the rotor without disconnecting the pipework, which simplifies maintenance on large pumps. They are used in municipal pumping stations, irrigation and industrial cooling circuits. The customer must confirm the flow rate, head and motor power required.
Horizontal multistage pumpsMultistage pumps with diffuser ring, designed for heads up to 650 m at flow rates up to 450 m³/h, suited to high-pressure water supply or industrial circuits with high head losses. Each stage adds pressure progressively, without significantly increasing the flow rate required. They are used in thermal power plants and pressure-boosting stations for water networks. The customer must provide the target pressure and flow rate so the number of stages can be sized.
Submersible pumps for drainage and wastewaterFamily of submersible pumps for drainage (up to 50,000 m³/h), wastewater with solids up to 12 inch (up to 18,000 m³/h) and dewatering (up to 1,000 m³/h), with submersible motors up to 1,500 kW. They are used in wastewater treatment plants, flood control and construction sites with water infiltration. The customer must specify the flow rate, the type of solids and the installation depth.
Fire-fighting pumpsVertical (500-5,500 GPM) and horizontal (750-5,000 GPM) pumps for fixed fire-fighting systems, available as complete packages with a diesel engine, dual electric/air or air/hydraulic start system, and variants for explosive atmospheres. A sea-water cooling system is also available. The customer must confirm the flow rate required, the discharge pressure and the type of drive (electric or diesel).

Why WPIL?

  • Active since 1952, with a range covering vertical, horizontal, submersible and fire-fighting pumps
  • Split case pumps for flow rates up to 15,000 m³/h and 2,000 kW motors
  • Submersible drainage pumps capable of flow rates up to 50,000 m³/h
  • Complete fire-fighting packages, with a diesel engine and dual electric or air/hydraulic start

Which WPIL codes and series are requested most often?

CodeDescription
Vertical Turbinevertical turbine pump, flow rate up to 50,000 m³/h
Mixed & Axial Flowvertical mixed-flow or axial-flow pump for large flow rates
Split Casehorizontal split case pump, flow rate up to 15,000 m³/h
Multistagehorizontal multistage pump, head up to 650 m
End Suctionhorizontal end suction pump, flow rate 420-5,000 m³/h
Non Cloghorizontal non-clog pump, for fluids with solids, flow rate up to 9,400 m³/h
Deepwell Submersiblesubmersible deep well pump, flow rate up to 5,000 m³/h
Drainage Submersiblesubmersible drainage pump, flow rate up to 50,000 m³/h
Sewage Submersiblesubmersible wastewater pump, solids up to 12 inch
Dewatering Submersiblesubmersible dewatering pump, flow rate up to 1,000 m³/h
Concrete Voluteengineered pump with concrete volute
Metallic Voluteengineered pump with metallic volute
Fire Fighting Verticalvertical fire-fighting pump, flow rate 500-5,500 GPM
Fire Fighting Horizontalhorizontal fire-fighting pump, flow rate 750-5,000 GPM
Fire Fighting System Packagecomplete package with diesel engine and dual start
Axial Flow Submersibleaxial-flow submersible pump for large flow rates

Where is WPIL equipment used?

  • Municipalities — pumping stations for drinking water and wastewater
  • Irrigation — high-capacity pumps for agricultural networks
  • Energy — multistage pumps for thermal power plants
  • Fire-fighting — complete packages with a diesel engine for fixed installations
  • Heavy industry — drainage and dewatering pumps for construction sites and platforms

How do we supply WPIL in Romania?

We supply high-capacity WPIL pumps for municipal, energy and irrigation projects, through EU and Asian supply channels — supplied to order, with a lead time that can be longer depending on the specification, for equipment sized to the project. We rely on the information in the WPIL manufacturer's documentation; availability is confirmed in the quotation. For an accurate quotation we need the application (municipal, irrigation, fire-fighting, energy), the flow rate and head required, plus the motor power wanted. For fire-fighting packages, also state the preferred type of drive, electric or diesel.

Lead times for the custom design of engineered pumps with a concrete volute are stated in the quotation, following a specific technical request.

Frequently asked questions about WPIL

What products does WPIL make?

WPIL makes vertical, horizontal, submersible and fire-fighting industrial pumps, and has been active since 1952. The range covers everything from vertical turbine pumps for deep wells to split case pumps for flow rates of 15,000 m³/h.

How do I choose the right WPIL pump for a municipal water station?

You need the flow rate required and the target head to choose between the split case, multistage or end suction series. For very high flow rates at moderate pressure, the split case series is often the right choice.

What capacity do WPIL submersible drainage pumps have?

WPIL submersible drainage pumps reach flow rates up to 50,000 m³/h, with heads up to 30 m and motors up to 1,500 kW. They are used for flood control and the rapid removal of water from large areas.

Do you supply WPIL pumps in Romania, and how long does it take?

Yes, we supply WPIL pumps to order through EU and Asian supply channels, with a lead time that can be longer depending on the product family. These are pumps sized individually for each project and supplied to order.

What information do you need for a WPIL pump quotation?

Send the application (municipal, irrigation, fire-fighting or energy), the flow rate required, the head and the motor power wanted. For fire-fighting packages, also state the preferred type of drive, electric or diesel.

How do I request a WPIL quotation?

Send the WPIL code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 20 November 2026 · Sources: WPIL Limited (manufacturer documentation)