Waterous supplier in Romania
Vehicle-mounted pumps and firefighting systems
Founded in 1886 · Headquarters: South St. Paul, Minnesota, USA
Who is Waterous and what does it make?
Waterous Company has made pumps for fire trucks and firefighting systems since 1886, based in South St. Paul, Minnesota. The company makes vehicle-mounted pumps (split-shaft, power take-off driven, engine-mounted or rear-mounted), portable engine-driven pumps, compressed air foam (CAF) systems, and hydrants and valves offered through Waterous (made by American Flow Control). From the Waterous range we can quote pumps for municipal fire trucks, airport (ARFF) equipment and components for industrial cooling installations.
What sets Waterous apart is the complete integration of the pumping chain on the fire truck: the same pump family (CS, CM, CX, CG series) comes in split-shaft, power take-off or direct-mount versions, so body builders can choose the configuration without changing the hydraulic principle. The HLU series covers both high and low pressure in the same housing, between 1,000 and 1,500 gpm, useful for mixed urban-rural fire trucks. All components are cast, machined and tested in the USA.
For Romania, Waterous means access to pumps for retrofitting existing fire trucks or for new emergency vehicle projects, plus components for hydrants and valves where compatibility with American standards is explicitly required by the end user.
What do we supply from the Waterous range?
| Product | Description |
|---|---|
| CS/CSU Series Split-Shaft Pumps | Single-stage pump with a horizontally split casing, available in the CSC22 and CSUC22 versions with C22 chain drive, mounted on the fire truck's driveshaft. It is the base line for municipal fire trucks requiring a single pressure stage. |
| CM/CMU Series Split-Shaft Pumps (Hi-Rise) | Two-stage pump with series/parallel operation and a low profile, used on fire trucks for high-rise buildings where extra pressure is needed on the discharge riser. The CMC22/CMUC22 versions keep the same chain drive as the rest of the split-shaft family. |
| HLU Series Power Take-Off Pumps | Compact pump driven through the vehicle's power take-off, with two pressure zones (high and low) in the same housing, with flow rates between 1,000 and 1,500 gpm. Suitable for mixed fire trucks operating in both urban and rural areas, without changing the pumping unit. |
| ECLIPSE CAF Systems | Compressed air foam system with an integrated compressor or a power take-off driven kit, for fire trucks using class A or B foam in firefighting. Also available in a slide-in/portable version for light emergency vehicles. |
Why Waterous?
- One pump family (CS/CM/CX/CG) available in split-shaft, power take-off or direct engine-mount versions
- The HLU series combines high and low pressure in the same pump housing, between 1,000 and 1,500 gpm
- Components cast, machined and tested entirely at the Minnesota plant
- ECLIPSE compressed air foam systems that can be integrated on new fire trucks or in retrofits
- Hydrants and valves offered through Waterous, made by American Flow Control
Which Waterous codes and series are requested most often?
| Code | Description |
|---|---|
| ESU1C22 | compact split-shaft pump, C22 chain drive |
| CSC22 | single-stage split-shaft pump, horizontally split casing |
| CSUC22 | CSU version of the CS series, for higher flow rates (1,500–2,250 gpm) |
| CMC22 | two-stage split-shaft pump, low profile |
| CMUC22 | CMU version of the CM series, with the same C22 chain drive |
| CXC22 | medium-size split-shaft pump, flexible options |
| CGC22 | single-stage split-shaft pump, vertically split volute |
| CXK | single-stage end-suction pump, power take-off drive |
| CSUK | single-stage pump, power take-off drive |
| CMUK | two-stage series/parallel pump, power take-off drive |
| HLUK | compact high/low pressure pump, 1,000-1,500 gpm |
| CLK | single-piece pump, flexible suction and discharge |
| CGK | single-stage pump, power take-off drive |
| CPK-2 | single-stage pump, power take-off drive, up to 300 gpm at 150 psi |
| CPK-3 | two-stage pump with pump and roll function, power take-off drive |
| CPK-4 | 4-stage pump for very high pressure (1,000 psi at 60 gpm), power take-off drive |
| CXT | engine-mounted pump, T-series transmission |
| ESU1D | compact rear-mounted pump |
Where is Waterous equipment used?
- Municipal fire services: pumps for new fire trucks and retrofit of existing vehicles
- Airports: pumps for ARFF rapid-intervention vehicles
- Forestry: portable engine-driven pumps for vegetation fires
- Nuclear energy: industrial pumps for cooling circuits
- Rail transport: pumps for high-rail operations
How do we supply Waterous in Romania?
We supply Waterous pumps for fire trucks and components for firefighting systems based on information published by the manufacturer; availability is checked on each request. Supply is to order, through supply channels in the USA, usually in 1–4 weeks from confirmation of the configuration; for current gaskets, valves and accessories we can check options with delivery in 24–72 h when the item is in stock, locally or at the supplier. For a quotation, send the required series (CS, CM, CX, CG or HLU), the mounting type (split-shaft, power take-off, direct) and the flow rate needed. Complete pump units are supplied to order.
Exact compatibility with each fire truck chassis is confirmed on the basis of the full technical specifications of the vehicle.
Frequently asked questions about Waterous
What does Waterous make?
Waterous has made pumps for fire trucks, portable engine-driven pumps, compressed air foam systems and hydrants since 1886 in South St. Paul, Minnesota. The range covers split-shaft, power take-off or direct engine mounting, with standard flow rates from 500 to over 1,500 gpm.
What is the difference between the Waterous CS and CM series?
The CS series has a single pressure stage, suited to standard fire trucks, while the CM (Hi-Rise) series has two stages in series/parallel operation for extra pressure on the riser, useful for high-rise buildings. Both use the same C22 chain drive.
Can you supply Waterous pumps in Romania and what is the lead time?
Yes, we supply Waterous pumps to order through supply channels in the USA, usually in 1–4 weeks, depending on the series and configuration. The exact lead time is confirmed once we receive the required series and mounting type.
What do I need to send for a Waterous pump quotation?
We need the required series (CS, CM, CX, CG, HLU), the mounting type (split-shaft, power take-off or direct engine mount), the required flow rate and pressure, and whether you need an integrated CAF system or just the pumping unit.
How do I request a Waterous quotation?
Send the Waterous code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 20 November 2026 · Sources: Waterous Company (manufacturer documentation)

