Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Wanner Engineering supplier in Romania

Hydra-Cell high-pressure piston-diaphragm pumps

Headquarters: Minneapolis, Minnesota, USA

Request a quote

Who is Wanner Engineering and what does it make?

Wanner Engineering is an American manufacturer of hydraulically balanced diaphragm seal-less pumps under the Hydra-Cell brand, headquartered in Minneapolis, Minnesota, with over 50 years of activity stated by the company. The range covers small models (F20/G20, M03/G03, D04/G04, D10/G10, D12/G12), medium models (D15/G15, D17/G17, H25/G25, D35/G35, D66/G66) and high-capacity models (T100, T200, Q155, Q330), plus the MT8 metering model, with different pressure submodels for each, as with G10-M4H or G10-M2M. For the Romanian market we can quote from this range, starting from the flow rate and working pressure required by the application.

What sets Hydra-Cell apart is the seal-less principle: hydraulically balanced diaphragms eliminate the dynamic seal on the piston, which reduces the risk of leakage with corrosive, abrasive or viscous fluids. The G10-M4H model, for example, reaches 1,500 psig (103 barg) at 193 gph, while G10-M2M raises the flow rate to 388 gph at a more moderate pressure of 725 psig. The range complies with API 674 and API 675 and falls within the high-pressure diaphragm pump segment.

Wanner suits applications with difficult fluids (corrosive, abrasive, viscous) where a centrifugal pump or a conventional piston pump would quickly lose its seal — Hydra-Cell removes this weak point by design.

What do we supply from the Wanner Engineering range?

ProductDescription
G10 / D10 SeriesHydra-Cell pump from the low-flow G series, with different pressure submodels: G10-M4H reaches 1,500 psig (103 barg) at 193 gph, while G10-M2M reaches 725 psig (50 barg) and 388 gph. Used for metering and transfer of corrosive or abrasive fluids.
Small G03 / G04 / G12 SeriesLow-flow Hydra-Cell pumps, for precision metering or small-scale transfer, with the same seal-less principles as the rest of the range, suited to OEM or industrial laboratory applications.
Large T100 / T200 / Q330 SeriesHigh-capacity Hydra-Cell pumps, for transferring large volumes of fluid at high pressure, available in low, medium and high pressure versions, for petrochemical and heavy industrial applications.
MT8 SeriesHydra-Cell pump from the metering and electronic control range, with low and medium pressure versions, also available in a version for explosion-risk areas (ATEX), per the manufacturer's documentation.

Why Wanner Engineering?

  • Seal-less principle with hydraulically balanced diaphragms — no dynamic seal on the piston
  • A wide range of models, from low flow rates (G03) to high capacities (T200, Q330)
  • Pressure submodels for each base design, such as G10-M4H (1,500 psig) or G10-M2L (290 psig)
  • Declared compliance with the applicable standards, per the manufacturer's documentation
  • Over 50 years of activity stated by the company in seal-less pump manufacturing

Which Wanner Engineering codes and series are requested most often?

CodeDescription
G10-M4H193 gph, max. pressure 1,500 psig
G10-M2M388 gph, max. pressure 725 psig
G10-M4L193 gph, max. pressure 290 psig
G10-M2L388 gph, max. pressure 290 psig
D10/G10base family, low-flow G series
T100high-capacity family
T200high-capacity family
Q155high-capacity family
Q330high-capacity family
MT8metering family, low/medium pressure
D04/G04low-flow family
D12/G12low-to-medium-flow family
D15/G15medium-capacity family
D17/G17medium-capacity family
M03/G03low-flow family, precise metering

Where is Wanner Engineering equipment used?

  • Petrochemicals — transfer of corrosive and abrasive fluids
  • Water treatment — metering and transfer of process chemicals
  • Chemical engineering — pumping viscous fluids at high pressure
  • Industrial cleaning — pressure washing systems
  • Descaling — systems for removing limescale deposits

How do we supply Wanner Engineering in Romania?

For Wanner Engineering, the G10 submodels and the rest of the Hydra-Cell family are those in the manufacturer's documentation; the lead time and availability are specified in the quotation. We supply the pumps to order through EU or USA supply channels, usually in 1–4 weeks, depending on the model and working pressure required. The range is supplied to order — each Hydra-Cell pump is configured for the fluid, flow rate and pressure. For a quotation, send the pumped fluid, the flow rate and the pressure required, plus whether the application calls for metallic or non-metallic heads.

The combination of pump head and material for each submodel is checked on each request, before the quotation.

Frequently asked questions about Wanner Engineering

What products does Wanner Engineering make?

Wanner Engineering makes hydraulically balanced diaphragm seal-less pumps under the Hydra-Cell brand, for transferring and metering corrosive, abrasive or viscous fluids. The range covers everything from small laboratory flow rates up to large industrial capacities.

How do I choose a Wanner Engineering Hydra-Cell pump by pressure?

Each base design (for example G10) has submodels with different pressure and flow rate: G10-M4H reaches 1,500 psig (103 barg) at 193 gph, G10-M2M 725 psig (50 barg) at 388 gph, and G10-M4L and G10-M2L 290 psig (20 barg).

Do you offer delivery in Romania for Wanner Hydra-Cell pumps?

Yes, we supply Wanner Engineering pumps to order through EU or USA supply channels, usually in 1–4 weeks, depending on the model and the pressure required. All available submodels are supplied to order.

What certifications does the Wanner Hydra-Cell range have?

The Hydra-Cell range complies with the API 674 and API 675 standards, relevant for positive displacement pumps used in the process industry and petrochemicals, where buyers often ask for proof of this compliance.

What data do I need to send for a Wanner pump quotation?

Send the pumped fluid, the flow rate and the pressure required, plus whether the application calls for metallic or non-metallic hydraulic heads. With this data we recommend the suitable base design and pressure submodel from the Hydra-Cell range.

How do I request a Wanner Engineering quotation?

Send the Wanner Engineering code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 20 November 2026 · Sources: Wanner Engineering, Inc. (manufacturer documentation)