Victor Pumps supplier in Romania
For Victor Pumps we quote the S 40 to S 91 self-priming pumps, the R 35 to R 105 internal gear pumps, the C centrifugal pumps and their wear parts; we need the type, the liquid, the viscosity and the suction lift.
Founded in 1948 · Headquarters: Ponte San Nicolò, Italy
Who is Victor Pumps and what does it make?
Victor Pumps is an Italian pump manufacturer, founded in 1948 and headquartered in Ponte San Nicolò, near Padua. Casting, machining and assembly are done in Italy, in the Padua area, with German components, and each pump is built individually and given a durable protective coating at the end. The range has two main directions: S series self-priming open-impeller centrifugal pumps, for industrial wastewater, and R series internal gear pumps, for viscous products. The C series completes the offer with non-self-priming centrifugal pumps. Each range is modular, so a model adapts easily to many applications.
The S pumps are installed dry, above or next to the liquid, and evacuate the air from the suction line on their own; the suction lift can reach 8 m, depending on the liquid. The open impeller lets solids pass, and the wear plate resists abrasion, so the pump handles wastewater, corrosive liquids and viscous liquids with suspensions, abrasive powders and air bubbles. They have a SiC/FKM mechanical seal with a stainless steel sleeve, a suction check valve in NBR, FKM, PTFE or EPDM, threaded connections or DIN or ASA flanges of up to 4″ and, on request, a cutting device for soft solids. They are made of cast iron or stainless steel, close-coupled, in the Bi-Block version with an IEC motor, on a baseplate or coupled to a diesel or hydraulic motor; an ATEX version is also available.
The R pumps are self-priming positive displacement pumps with internal gears: the rotor drives the inner gear, and the crescent between them pushes the liquid toward the discharge, with constant flow, without pulsation and without foaming. The flow is proportional to the speed, the pump works the same in both directions of rotation and has an integrated relief valve, a heating jacket cast into the casing, connections at 90° or 180° and a single shaft seal or a magnetic coupling. The sizes include R 35, R 40, R 50, R 65, R 80 and R 105, also in ATEX version, for bitumen, asphalt, epoxy resins, glucose, glycerine, adhesives, paints and inks. For a quotation, send us the type from the nameplate and the liquid pumped.
What do we supply from the Victor Pumps range?
| Product | Description |
|---|---|
| S series self-priming pumps | Open-impeller centrifugal pumps, installed dry, for industrial wastewater, corrosive or viscous liquids with solids, abrasive powders and air. They draw up to 8 m, have a suction check valve and a SiC/FKM seal, and are supplied in cast iron or stainless steel, close-coupled or Bi-Block, including ATEX. |
| R series internal gear pumps | Self-priming positive displacement pumps for liquids of any viscosity and temperature, corrosive or abrasive, with constant, pulsation-free flow, in both directions of rotation. They have an integrated relief valve, a heating jacket, connections at 90° or 180° and a single seal or magnetic coupling; sizes from R 35 to R 105. |
| C series centrifugal pumps | Non-self-priming centrifugal pumps, with the same design solutions as the S series: an open-vane impeller for the passage of solids, detachable connections that allow the pump to be removed without disconnecting the pipes, and a mechanical seal. They are made of cast iron or bronze; the version with a cutter on the wear plate serves for blackwater on board ships. |
| ATEX versions of the S and R series | The S and R pumps are also supplied with an ATEX certificate, with separate operating instructions for these versions. They are used to transfer solvents, diesel, petrol, petroleum products, transformer oil, resins and additives where the working area is classified. |
Why Victor Pumps?
- Self-priming without immersion — the S pump stands dry next to the tank and draws up to 8 m
- Open impeller and wear plate — solids, sand and abrasive suspensions pass through
- Pulsation-free flow with the R pumps — transfer and dosing of viscous products without vibration in the pipework
- ATEX versions in the S and R series — for solvents, fuels and explosive atmosphere zones
- Heating jacket cast into the casing in the R series — for bitumen, asphalt and chocolate
Which Victor Pumps codes and series are requested most often?
| Code | Description |
|---|---|
| S 40 | Self-priming open-impeller centrifugal pump |
| S 50 | Self-priming open-impeller centrifugal pump |
| S 60+50 | Self-priming open-impeller centrifugal pump |
| S 65 | Self-priming open-impeller centrifugal pump |
| S 80 | Self-priming open-impeller centrifugal pump |
| S 85 | Self-priming open-impeller centrifugal pump |
| S 91 | Self-priming open-impeller centrifugal pump |
| R 35 | Internal gear positive displacement pump |
| R 40 | Internal gear positive displacement pump |
| R 50 | Internal gear positive displacement pump |
| R 65 | Internal gear positive displacement pump |
| R 80 | Internal gear positive displacement pump |
| C 30 | Open-impeller centrifugal pump, non-self-priming |
Where is Victor Pumps equipment used?
- Wastewater treatment and industrial drainage — S pumps for wastewater, basin water and rainwater
- Chemicals, paints and inks — R pumps for resins, additives and adhesives
- Oil and fuel depots — transfer of diesel, fuel oil and bitumen with S and R pumps
- Food industry — R pumps for chocolate, glucose and fats
- Shipbuilding — C pumps with a cutter for blackwater
How do we supply Victor Pumps in Romania?
We can quote Victor Pumps pumps from the S, R and C series, in standard or ATEX version, as well as spare parts: impellers, wear plates, mechanical seals and check valves. For a correct quotation, send us the type from the nameplate (for example S 50 or R 65), the liquid pumped, the temperature and viscosity, the flow, the suction and discharge heads and the type of connections. We source the pumps to order, through import from the EU, usually in 1–4 weeks; a part can ship in 24–72 h when the item is available locally or at the supplier, and for ATEX versions, depending on brand and specification, the lead time can be longer.
We select the pump on the basis of the process data you send us, while installing the suction line and the priming test on site remain with the plant team.
Frequently asked questions about Victor Pumps
What does Victor Pumps make?
Victor Pumps makes, in Italy near Padua, S series self-priming open-impeller centrifugal pumps, for industrial wastewater, R series internal gear positive displacement pumps, for viscous products, and C series non-self-priming centrifugal pumps. The S and R series are also supplied in ATEX version.
How do I choose between an S pump and an R pump?
The S pump is a centrifugal, open-impeller pump for wastewater and liquids with solids, abrasives or air, with suction of up to 8 m. The R pump is positive displacement: the flow is proportional to the speed and stays pulsation-free, for liquids of any viscosity, from diesel to bitumen. Send us the liquid, the viscosity and the working temperature.
Do you supply Victor Pumps pumps in Romania, and how soon?
Yes, through import from the EU. Standard pumps and wear parts usually arrive in 1–4 weeks, and 24–72 h when the item is available locally or at the supplier. For ATEX versions or versions with a heating jacket, depending on brand and specification, the lead time can be longer.
Can I replace a submersible pump with a Victor S self-priming pump?
It is possible, if the suction lift and the liquid allow it. The S pump stands dry next to the tank, so it does not have to be lifted out of the water for maintenance. We need the level difference between the liquid and the pump, the length of the suction line, the flow, the discharge head and the nature of the water, so we can check that the suction stays below the 8 m limit.
What do I send for a quotation on a Victor R pump?
The product pumped, the viscosity at working temperature, the temperature, the flow and discharge pressure, whether you need a heating jacket, a magnetic coupling or an ATEX version, and the position of the connections, at 90° or at 180°. For a replacement, the type from the nameplate and the serial number are enough.
How do I request a Victor Pumps quotation?
Send the Victor Pumps code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 12 November 2026 · Sources: Victor Pumps (manufacturer documentation)