Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Sulzer supplier in Romania

For Sulzer products we quote against the code on the nameplate; availability and lead time are confirmed in the quotation.

Founded in 1834 · Headquarters: Winterthur, Switzerland

Request a quote

Who is Sulzer and what does it make?

Sulzer started in 1834 in Winterthur as an iron works, and over almost two centuries it has transformed itself several times — marine engines, turbines, textiles — until today it is an international manufacturer of pumps for critical industrial processes and for municipal water and wastewater. Few pump manufacturers can show such a long continuous history and such a broad presence, from oil platforms to city wastewater treatment plants.

Sulzer API 610 process pumps are intended for refineries, petrochemicals and power plants; flow rate, pressure and maximum temperature depend on the model and are confirmed from the manufacturer's documentation. On the municipal side, ABS XFP series submersible pumps are intended for wastewater pumping stations, with non-clogging impellers (vortex or channel) and powers from 1.3 kW up to 550 kW for large sewage stations. The ABS range also includes mixers and aeration systems for the biological tanks of treatment plants, completing the offer for a full water treatment cycle.

For chemical processes and the paper industry, Sulzer AHLSTAR series pumps offer corrosion- and abrasion-resistant construction for difficult fluids in pulp processing. For industry in Romania, the Sulzer range covers both critical refinery and power applications and the everyday infrastructure of water and sewage plants, with a single high technical standard across the whole range.

What do we supply from the Sulzer range?

ProductDescription
API 610 Process Pumps HPX/BB SeriesCentrifugal process pumps built to the API 610 standard, in axial-suction design (HPX series) or with a between-bearings casing (BB type) for critical services in refineries, petrochemicals and power generation. Maximum flow rates, pressures and temperatures depend on the model and are confirmed from the manufacturer's documentation. Varied construction materials, from carbon steel to duplex or super-duplex alloys, depending on the chemical aggressiveness of the fluid. Single or double mechanical seal, with flush systems according to API 682 plans, for reliability in continuous operation in petrochemical services.
ABS XFP Series Submersible PumpsSubmersible pumps for municipal and industrial wastewater, with a vortex or channel impeller with anti-clogging geometry for fluids containing solids and textile fibres. Powers from 1.3 kW for small pumping stations up to 550 kW for large urban sewage stations (50 Hz). Electric motor cooled by a closed system independent of the liquid level in the tank, with double mechanical seal and moisture sensors in the oil chamber for early fault detection. Automatic coupling system that lowers on guide rails, which removes the need for personnel to enter the collection tank for routine service.
ABS Mixers and Aeration SystemsSubmersible mixers and aeration systems for the biological tanks of wastewater treatment plants, essential for keeping activated sludge in suspension and for supplying the oxygen needed by biological degradation processes. The mixers offer propellers of various diameters and profiles to optimise energy consumption according to the geometry of the tank. The aeration systems include both blowers and fine-bubble diffusers for efficient oxygen transfer into the body of water. Configured according to the tank volume, the organic load of the wastewater and the energy efficiency requirements of the plant operator.
AHLSTAR Series Chemical Process PumpsCentrifugal process pumps for the chemical and pulp and paper industries, with abrasion- and corrosion-resistant construction for difficult fluids — pulp stock, black liquors, suspensions with fibre content. Flow rates and pressures depend on the model. Open or semi-open impellers for tolerance of large particles, with construction materials resistant to abrasion (white cast iron, polyurethane) or corrosion (stainless steel, duplex) depending on the application. Modular design that allows quick adaptation to process changes without a complete redesign of the pump.

Why Sulzer?

  • Almost two centuries of continuous industrial history — few pump manufacturers can show such continuity
  • API 610 pumps for critical services — intended for refineries, petrochemicals and power
  • Submersible wastewater pumps — ABS XFP, for wastewater with solids and fibrous materials
  • Range for wastewater treatment — pumps, mixers and aeration systems, from the same range
  • Abrasion and corrosion resistance — dedicated solutions for pulp and paper, difficult fluids
  • International service network — spare parts and technical support through the manufacturer's subsidiaries

Which Sulzer codes and series are requested most often?

CodeDescription
Muffin MonsterSolids grinder for sewage and sludge, pipeline-mounted
Channel MonsterSolids grinder for open wastewater channels
HSTBlower for economical aeration of wastewater
SALOMIXEquipment from the Sulzer range; the exact function is confirmed from the manufacturer's documentation
MCMedium consistency equipment for pulp processing
Nordic WaterEquipment for screening, sedimentation and filtration of water
ISO 5199Centrifugal pump with axial suction and overhung casing
GSGBarrel pump with diffuser for between-bearings installation
SJD-CEPVertical suspended pump for condensate handling
SILHigh-efficiency vertical in-line centrifugal pump
XJSubmersible pump for dewatering and drainage
ABS XFPSubmersible pump for wastewater with solids, IE3 motors

Sulzer series with English pages

Where is Sulzer equipment used?

  • Oil and gas — refineries and petrochemical plants
  • Power generation — thermal, nuclear and biomass plants
  • Wastewater treatment — municipal pumping and treatment plants
  • Chemical and petrochemical industry — transfer of corrosive fluids
  • Paper and pulp industry — processing of stock and process liquors
  • Mining — pumping of abrasive slurries
  • Food industry — transfer of process fluids

How do we supply Sulzer in Romania?

For Sulzer API 610 process pumps and ABS submersible pumps, we work from the manufacturer's technical documentation and through EU supply channels — lead time and availability are specified in the quotation. For impellers, mechanical seals and bearings of ABS pumps already installed, the general guide is 24–72 h when the item is in stock, locally or at the supplier; for new pumps and units, the lead time to order is usually 1–4 weeks. For correct sizing, we need the real system curve (flow rate, head), the fluid being pumped and the construction material required. We prepare the quotation based on these real operating conditions in your application.

We check Sulzer availability for large multistage API 610 pumps on request; warranty interventions on installed ABS pumps remain with the manufacturer.

Frequently asked questions about Sulzer

Which Sulzer pump should I choose for wastewater with solids and fibrous materials?

The ABS XFP submersible pump is built specifically for wastewater with solids and fibrous materials, using ContraBlock Evo impellers and IE3 high-efficiency motors, available in powers of up to 550 kW. For prior grinding of solids before pumping, a grinder from the Muffin Monster family mounted on the pipeline reduces the risk of clogging.

What is the difference between Sulzer GSG and SJD-CEP pumps?

GSG is a barrel pump with diffuser, designed for between-bearings installation at high flow rates and pressures in industrial applications. SJD-CEP is a vertical suspended pump, usually used for condensate handling, where vertical installation saves space in the pump room.

What powers and heads do Sulzer ABS XFP submersible pumps have?

ABS XFP pumps cover powers of 1.3–550 kW at 50 Hz and heads of up to 80 m. The motors are IE3 according to IEC 60034-30, and the ContraBlock Evo impeller uses a special vane geometry and Pulse-Out technology for efficient passage of solids.

What information do I send for a Sulzer pump quotation?

It helps to specify the fluid being pumped, the required flow rate and head, and whether the water contains solids or fibres. These details allow the right choice between an ABS XFP series submersible pump and a standard centrifugal pump built to ISO 5199.

What is the Sulzer Channel Monster grinder?

It is a solids grinder intended for open wastewater channels, used to reduce the size of solid and fibrous materials before they reach the pumps or the next treatment stages. It is an alternative to the pipeline-mounted Muffin Monster model, when the installation has an open channel.

How do I request a Sulzer quotation?

Send the Sulzer code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 20 November 2026 · Sources: Sulzer (manufacturer documentation)