Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Sicme Motori supplier in Romania

For Sicme Motori we quote the MQ vector asynchronous motors, the RA direct current motors, the SQ permanent magnet synchronous motors, the HTQ torque motors and the NGBe servomotors; we need the series, the frame size and the nameplate data.

Headquarters: Grezzago, Italy

Request a quote

Who is Sicme Motori and what does it make?

Sicme Motori makes electric motors for variable speed industrial drives. The series are easy to recognise by their letters: MQ for vector asynchronous motors, RA for DC motors, SQ for permanent magnet synchronous motors, HTQ for torque motors and NGBe for servomotors. The headquarters are in Grezzago, near Milan.

The MQ series is a three-phase asynchronous squirrel-cage motor, built for operation with a variable frequency drive. It is supplied in 11 frame sizes, from 100 to 500, for powers between 2.5 and 3600 kW, with a separate fan that keeps the maximum torque even at low speeds. The AW versions, with liquid cooling, and AJ, with low inertia, complete the series. The RA DC motors cover 20 sizes, from 80 to 800, with powers from 0.5 to 2500 kW, and appear on rolling mills, extruders, presses, cranes and machine tools.

The SQ synchronous motors, with 4, 6 or 12 poles, fall in the IE4 efficiency class and have a power of 3 to 1000 kW in 7 sizes; the 12-pole version is designed for direct drive. The HTQ torque motors give high torque at low speed, between 3.7 and 7000 Nm and between 20 and 800 rpm, and remove the gearbox from the drive train. The range also includes NGBe permanent magnet servomotors for automation, as well as permanent magnet generators for hydropower and wind plants.

For a correct order, what matters is the series, the frame size, the type of cooling and the accessories on the nameplate: encoder, tachogenerator, brake or sensors. The same series are supplied with several degrees of protection and mounting forms.

What do we supply from the Sicme Motori range?

ProductDescription
MQ vector asynchronous motorsThree-phase squirrel-cage motors, in 11 frame sizes, from 100 to 500. They have an independent fan for constant torque at low speed, class F insulation and IP23 or IP54 protection. The AW (liquid cooling) and AJ (low inertia) versions cover special installations.
RA DC motorsDC motors for variable speed industrial drives, in 20 sizes between 80 and 800, with a fully laminated stator. From size 180 upwards there are compensating windings. They are used on rolling mills, extruders, presses and cranes.
SQ synchronous motors and HTQ torque motorsThe SQ series is a permanent magnet synchronous motor, with 4, 6 or 12 poles, in the IE4 class. The HTQ series is a torque motor with hollow shaft and solid shaft versions, for direct integration into the machine, without a gearbox.
NGBe servomotors and generatorsNGBe is a brushless permanent magnet servomotor for industrial automation. The range also includes permanent magnet generators for hydropower plants, coupled directly to the turbine, and for direct drive wind turbines.

Why Sicme Motori?

  • Clear series by letter — MQ, RA, SQ, HTQ and NGBe are easy to recognise on the nameplate and are ordered without ambiguity
  • MQ vector asynchronous motor from 2.5 to 3600 kW — the same family covers everything from small drives to high-power installations
  • RA DC motors in 20 sizes — useful on older machinery, where the DC drive remains the solution in the design
  • HTQ torque motors, from 20 to 800 rpm — direct drive removes the gearbox and its wear parts
  • SQ synchronous motors in the IE4 class — high efficiency, from 3 to 1000 kW

Which Sicme Motori codes and series are requested most often?

CodeDescription
MQVector asynchronous motor, sizes 100–500, 2.5–3600 kW
AWLiquid-cooled version of the MQ series
AJLow-inertia version of the MQ series
RADC motor, sizes 80–800, 0.5–2500 kW
SQPermanent magnet synchronous motor, 4, 6 or 12 poles, IE4 class
SJLow-inertia version of the SQ series
HTQTorque motor, 3.7–7000 Nm, 20–800 rpm
NGBeBrushless permanent magnet servomotor
Generator hidroPermanent magnet generator, coupled directly to the turbine
Generator eolianPermanent magnet generator, direct drive

Where is Sicme Motori equipment used?

  • Rolling mills and metalworking — RA DC motors and SQ synchronous motors
  • Extrusion and plastics processing — variable speed drives
  • Pumps — SQ synchronous motors; ventilation — MQ asynchronous motors
  • Cranes and presses — RA DC motors
  • Hydropower and wind plants — permanent magnet generators

How do we supply Sicme Motori in Romania?

We can quote motors from the MQ, RA, SQ, HTQ and NGBe series, in the version your installation requires. For a correct quotation we need the series, the frame size, the power, the speed, the voltage, the type of cooling and the accessories fitted. If you are replacing an existing motor, a photo of the nameplate and the flange dimensions shorten the check. Motors are supplied to order, usually in 1–4 weeks; for special configurations the lead time may be longer, and the exact date is confirmed in the quotation.

Compatibility with an existing variable frequency drive or encoder is checked together, based on the installation data, before the quotation is confirmed.

Frequently asked questions about Sicme Motori

What do the letters MQ, RA, SQ, HTQ and NGBe mean at Sicme Motori?

The letters show the motor family: MQ is a vector asynchronous motor, RA is a DC motor, SQ is a permanent magnet synchronous motor, HTQ is a torque motor, and NGBe is a servomotor. The figures that follow indicate the size.

How do I choose between an MQ motor and an SQ synchronous motor?

MQ is a squirrel-cage asynchronous motor, from 2.5 to 3600 kW; SQ is a permanent magnet synchronous motor, from 3 to 1000 kW, in the IE4 class. The choice depends on the power required, the space available and the existing drive. Send the load data, and we check the suitable version.

Do you supply Sicme motors in Romania, and how quickly?

Yes, we supply motors to order. The lead time is usually 1–4 weeks, and a motor can ship in 24–72 h when the item is in stock, locally or at the supplier. For large series or special versions the lead time may be longer; the exact date appears in the quotation.

Can I replace an old DC motor with one from the RA series?

Yes, if the size, power, speed, armature voltage and mounting form match. The equivalence is established after checking: send the motor nameplate, the mounting dimensions and the type of cooling, and we compare the data with the RA sizes, from 80 to 800.

What data should I send for a quotation on an HTQ or NGBe motor?

Send the series or code, the torque needed, the speed, the shaft type (hollow or solid), the type of cooling and the accessories wanted, for example an encoder or brake. HTQ covers between 3.7 and 7000 Nm at 20–800 rpm, so the torque and the speed are the data that decide the suitable version.

How do I request a Sicme Motori quotation?

Send the Sicme Motori code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Sicme Orange1 (manufacturer documentation)