Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Stögra supplier in Romania

For Stögra we quote two-phase stepper motors SM 56, SM 87, SM 88, SM 107 and SM 168, hollow-shaft versions SMH, SERS and WSERS controllers and power stages of the SE series; the series is identified by code.

Headquarters: Munich, Germany

Request a quote

Who is Stögra and what does it make?

Stögra Antriebstechnik is a Munich-based manufacturer of stepper motors and of the control electronics for them. Development and production are carried out there as well. The range covers hybrid two-phase motors, motors in special versions for extreme conditions, positioning controllers with a power stage and power stage boards for rack mounting.

Standard motors have a step angle of 1.8° at full step and are divided by flange diameter: SM 56, with 56.5 mm and 0.6–1.8 N·m, SM 87 and SM 88, with 86 mm and between 2 and 12 N·m, SM 107, with 108 mm and 4–16 N·m, and SM 168, with 168 mm and 19–38 N·m. The hollow-shaft version is called SMH 88 and SMH 107. Special versions include an extended temperature range, vacuum motors, IP68 protection and anti-corrosion paint.

The SERS and WSERS controllers position two-phase stepper motors point to point, with microstep output, 12,800 steps per revolution, and a current of up to 14.5 A per phase. The standard interface is RS232, with RS485, Profibus DP and CANopen as options. The SE series boards work between 24 and 240 V DC. For a quotation the motor code, the holding torque, the phase current and the supply voltage matter.

What do we supply from the Stögra range?

ProductDescription
SM and SMH stepper motorsHybrid two-phase motors with a step angle of 1.8°. The SM 56, 87, 88, 107 and 168 series have holding torques between 0.6 and 38 N·m, depending on length. SMH 88 and SMH 107 are the hollow-shaft versions. They can be ordered with brake, encoder or gearbox.
Motors in special versionsVersions for extreme conditions: extended temperature range, vacuum motors, IP68 protection, anti-corrosion paint, shaft ends with key and a second shaft end. The precise data are established on the basis of the customer's requirement.
SERS and WSERS controllersPositioning controllers with a power stage for two-phase stepper motors. Current of 0–14.5 A per phase, voltage of 24–240 V DC, microsteps with 12,800 steps per revolution. WSERS is also available in versions powered directly from the 230 V mains.
SE power stages and ELK systemThe SE boards are bipolar stages with a current chopper, in Eurocard format 100 × 160 mm. They are supplied in the types SE 400.12.120 V33 and SE 400.06.85 V33, and in the ELK wall system they can work on one or several axes.

Why Stögra?

  • Five flange sizes between 56 and 168 mm — the motor fits from small mechanisms to high-torque axes
  • Hollow shaft on SMH 88 and SMH 107 — for mechanisms where the axis must pass through the motor
  • Special versions for vacuum, IP68 or extended temperature — for conditions where the standard motor cannot cope
  • SERS controller with five operating modes — serial, parallel, master-slave, stand-alone and manual
  • ELK wall-mounted multi-axis system — several axes controlled from a single housing

Which Stögra codes and series are requested most often?

CodeDescription
SM 56Two-phase stepper motor, flange 56.5 mm, 0.6–1.8 N·m
SM 87Two-phase stepper motor, flange 86 mm, 2–8 N·m
SM 88Two-phase stepper motor, flange 86 mm, 3–12 N·m
SM 107Two-phase stepper motor, flange 108 mm, 4–16 N·m
SM 168Two-phase stepper motor, flange 168 mm, 19–38 N·m
SMH 88Stepper motor with hollow shaft
SMH 107Stepper motor with hollow shaft
SERSPositioning controller for stepper motors
WSERSPositioning controller in compact housing
SE 400.12.120 V33Power stage, 14.5 A per phase, 60–120 V DC
SE 400.06.85 V33Power stage, 8.4 A per phase, 50–85 V DC
SE 400.04.85 V33Power stage, 5.6 A per phase, 50–85 V DC
SE 400.02.24 V33Power stage, 2.8 A per phase, 20–70 V DC
ELKWall system for one or several axes

Where is Stögra equipment used?

  • Positioning machines — stepper motors with SERS controller for point-to-point moves
  • Vacuum installations — stepper motors in special version
  • 19-inch rack equipment — SE power stage boards
  • Multi-axis automation — ELK system with several axes in one housing
  • Mechanisms with hollow shaft — SMH 88 and SMH 107 motors

How do we supply Stögra in Romania?

We can quote Stögra stepper motors, positioning controllers and power stages, including replacements for existing systems. For a correct quotation send the motor or board code, the holding torque, the phase current, the supply voltage and the interface required; for controllers add the number of axes. Delivery is to order, usually in 1–4 weeks; the exact lead time is confirmed in the quotation.

We check in the quotation whether the brake, encoder or gearbox version requested for the motor is supplied in the combination wanted.

Frequently asked questions about Stögra

What are the SM 56 and SMH 88 motors and the SERS controllers at Stögra?

Stögra Antriebstechnik makes, in Munich, two-phase stepper motors, motors in special versions, SERS and WSERS positioning controllers and power stages of the SE series. The standard motors are SM 56, 87, 88, 107 and 168, and the hollow-shaft versions are SMH 88 and SMH 107.

How do I choose the right SM motor?

The choice starts from the holding torque and the flange. SM 56 has 0.6–1.8 N·m, SM 87 has 2–8 N·m, SM 88 has 3–12 N·m, SM 107 has 4–16 N·m, and SM 168 has 19–38 N·m. Send the torque required, the flange and the available current, and we check the series.

Do you supply Stögra in Romania and how fast?

Yes. Stögra motors, controllers and boards are sourced to order, usually in 1–4 weeks. An item can ship in 24–72 h when the item is in stock, locally or at the supplier. Depending on the code and the specification, the lead time can be longer.

Can I replace an old power stage with one from the SE series?

Yes, the SE series is compatible with older power stages (backward compatibility). Send the code from the board, the current per phase, the supply voltage and the step resolution used. On this basis we check whether there is a suitable SE type and confirm the replacement in the quotation.

What data do you need for a SERS or WSERS controller?

For SERS or WSERS send the code or the housing version, the number of axes, the current per phase, the supply voltage, the interface (RS232, RS485, Profibus DP or CANopen) and the operating mode wanted. With these data we prepare the quotation and check the combination with the motor.

How do I request a Stögra quotation?

Send the Stögra code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Stögra Antriebstechnik GmbH (manufacturer documentation)