Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

SIREM supplier in Romania

For SIREM we quote reversible asynchronous gear motors in the F, H, L, M, N and P series, sealed tubular motors of 120 and 600 Nm and vertical and centrifugal pumps; the item is identified by type and nameplate.

Headquarters: Saint-Maurice-de-Beynost, France

Request a quote

Who is SIREM and what does it make?

SIREM is a French manufacturer of electric motorisation solutions, based in Saint-Maurice-de-Beynost, France. For industry, the offer has three lines: asynchronous gear motors with parallel gearing, sealed tubular motors and pumps. The tubular motors are sealed, with high torque, and can replace hydraulic solutions.

The gear motors are asynchronous and reversible. Type F runs between 10 and 300 rpm, with torques of 0.5–12 N·m. Type H covers 2.3–200 rpm and 1.4–35 N·m. Types L and M range from 10 to 340 rpm, with torques between 1.7 and 53 N·m. Type N, with solid or hollow shaft, has 2.2–67 rpm and 8.1–100 N·m, and type P has 23 and 32 rpm, with 62 and 85 N·m. The applications mentioned are agitators, motorised barriers, packaging machines, bakery equipment, lifts and automatic gates.

The sealed tubular motors are offered at 120 and 600 N·m and are designed for demanding environments. The pump range includes vertical pumps, types F and J, and centrifugal pumps, types A, H, K and L. For a quotation, the type from the nameplate, the speed, the torque or flow required, the shaft type and the supply voltage are needed.

What do we supply from the SIREM range?

ProductDescription
Type F, H, L, M gear motorsReversible asynchronous gear motors with parallel gearing. F has 0.5–12 N·m, H has 1.4–35 N·m, and L and M reach 53 N·m. They are found on agitators, packaging machines, bakery equipment, motorised barriers and lifts.
Type N and P gear motorsVariants with solid or hollow shaft, for higher torques: N has 8.1–100 N·m between 2.2 and 67 rpm, and P has 62 and 85 N·m at 23 and 32 rpm. They are used on automatic gates, agitators and retractable bollards.
Sealed tubular motorsTubular motors with gearbox, in 120 and 600 N·m variants, waterproof. They are designed as an electric alternative to hydraulic cylinders and for demanding environments, where the motor must be fully protected.
Vertical and centrifugal pumpsThe vertical pumps are called type F and type J, and the centrifugal ones type A, H, K and L. The range includes design and manufacture to order for small and medium series; the exact type is confirmed from the pump nameplate.

Why SIREM?

  • Reversible asynchronous gear motors — the same type is used for both directions of rotation
  • Six types F, H, L, M, N and P — cover torques from 0.5 to 100 N·m, from small mechanisms to automatic gates and agitators
  • Solid or hollow shaft on types N and P — chosen according to how it is coupled to the mechanism
  • Sealed tubular motors of 120 and 600 N·m — can replace a hydraulic cylinder with an electric solution
  • Vertical and centrifugal pumps in the same range — a single request for gear motor and pump

Which SIREM codes and series are requested most often?

CodeDescription
Type FReversible asynchronous gear motor, 0.5–12 N·m
Type HReversible asynchronous gear motor, 1.4–35 N·m
Type LReversible asynchronous gear motor, 1.7–53 N·m
Type MReversible asynchronous gear motor, 1.7–53 N·m
Type NGear motor with solid or hollow shaft, 8.1–100 N·m
Type PGear motor with solid or hollow shaft, 62 and 85 N·m
Tubular 120 NmSealed tubular motor, 120 N·m
Tubular 600 NmSealed tubular motor, 600 N·m
Pump FVertical pump type F
Pump JVertical pump type J
Pump ACentrifugal pump type A
Pump KCentrifugal pump type K

Where is SIREM equipment used?

  • Bakeries — agitators and packaging machines driven by gear motors
  • Access control — motorised barriers, automatic gates and retractable bollards
  • Lifting and display mechanisms — lifts and panels with medium-torque gear motors
  • Special machinery — sealed tubular motors in place of hydraulic cylinders
  • Fluid installations — vertical and centrifugal pumps in several designs

How do we supply SIREM in Romania?

We can quote SIREM gear motors, tubular motors and pumps, including replacement items for drives in service. For an accurate quotation, send the type and code from the nameplate, the output speed, the torque, the supply voltage, the shaft type and the mounting position; for pumps, add the flow and pressure required. The order is fulfilled, usually in 1–4 weeks; the exact lead time is confirmed in the quotation.

We check in the quotation which design variants exist for your code, because some types are supplied only with certain shafts or certain voltages.

Frequently asked questions about SIREM

What do the types F, H, L, M, N and P and the 120 and 600 N·m tubular motors cover at SIREM?

SIREM makes reversible asynchronous gear motors, sealed tubular motors and vertical and centrifugal pumps in France. The gear motors are grouped into types F, H, L, M, N and P, by torque and speed. The tubular motors are offered in 120 and 600 N·m variants.

How do I choose the gear motor type?

The choice starts from the output torque and speed. Type F goes up to 12 N·m, H up to 35 N·m, L and M up to 53 N·m, N up to 100 N·m, and P has 62 and 85 N·m. Send the torque required, the speed and the shaft type, and we check the suitable type.

Do you supply SIREM in Romania and how fast?

Yes. Gear motors, tubular motors and pumps come to order, and the usual lead time is 1–4 weeks. An item can ship in 24–72 h when the item is in stock, locally or at the supplier. Depending on the type and the specification, the lead time may be longer.

Can I replace a hydraulic cylinder with an electric tubular motor?

It is possible: SIREM sealed tubular motors, of 120 and 600 N·m, are designed as an electric alternative to hydraulic cylinders. If you have an application of this kind, send the stroke, the force or torque required, the available voltage and the environmental conditions, and we check whether a suitable variant exists.

What data do you need for a Type F or Type P gear motor and for a Type J pump?

Type F is a reversible asynchronous gear motor, and type P is a gear motor with solid or hollow shaft. For a gear motor, send the type from the nameplate, the output speed and torque, the voltage and the shaft type. For a pump, send the type, the flow, the pressure and the liquid pumped. A photo of the nameplate shortens the check and avoids confusion between similar variants.

How do I request a SIREM quotation?

Send the SIREM code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: SIREM (manufacturer documentation)