Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Stieber supplier in Romania

For Stieber we quote CSK, NF and AA freewheels, AL..G self-contained units and RSCI, RSXM, RIZ and RDBK backstops, based on the type and size on the part, the torque, the speed and the direction of rotation.

Request a quote

Who is Stieber and what does it make?

Stieber is a German manufacturer of freewheels, one-way clutches and backstops. A freewheel transmits torque in one direction only and disengages automatically when the driven element rotates faster than the driving one; the same mechanism, fitted on a shaft that must not turn back, becomes a backstop. The programme is organised by construction: freewheels with combined bearing, built-in freewheels, self-contained units in a housing and backstops with centrifugally lifted-off locking elements.

The CSK series integrates sprag-type locking elements in a ball bearing, in sizes from 8 to 40 mm; on most sizes the bearing is from the 62 series. The NF and AA series are roller freewheels without their own bearings, where the inner race is fixed on the shaft with a key. The AL..G series is a self-contained roller unit in a cast iron housing, with oil lubrication, intended for dual or standby drives of large fans, pumps and turbines. The RSCI, RSXM, RIZ and RINZ series are backstops with centrifugally lifted-off sprags, while RDBK adds an integrated torque limiter, with multiple discs in oil.

For a maintenance engineer, the freewheel may appear on inclined conveyors, in gearbox housings and on standby-motor drives, where a worn part must be identified by type, size, direction of rotation and the nominal torque TKN from the catalogue. The maximum permitted torque is twice TKN.

What do we supply from the Stieber range?

ProductDescription
CSK and CSK..2RS — freewheels with combined bearingChrome-plated sprags integrated in a ball bearing (from the 62 series on most sizes), in sizes 8–40 mm with nominal torque between 2.5 and 325 Nm. The 2RS version is 5 mm wider and has lip seals, resistant to water splashes.
NF and AA — built-in roller freewheelsFreewheels without their own bearings, with the inner race fixed on the shaft with a key, oil lubrication and bearings provided by the application. NF ranges from size 8 to 150 mm, AA from 12 to 250 mm, with nominal torques of up to 225,000 Nm.
AL..G — self-contained freewheelsRoller unit, supported on bearings, in a cast iron housing with oil and integrated forced lubrication, from 30-G1 (500 Nm) to 150-G5 (70,000 Nm), for dual or standby drives of fans, pumps and turbines.
RSCI, RSXM, RIZ, RINZ and RDBK — backstopsBackstops with centrifugally lifted-off sprags, in versions 20–300, plus RIZ and RINZ supported on bearings and grease-lubricated. RDBK 110-28 to 280-83 (2,300–40,000 Nm) has a torque limiter and manual hydraulic release.

Why Stieber?

  • Four distinct constructions — CSK with combined bearing, NF and AA built-in, AL..G self-contained and RSCI with centrifugal sprags, so the type is chosen according to the way of mounting
  • Backstops with centrifugally lifted-off sprags — the elements lift off the race by centrifugal force, which is why each RSCI size has in the table a minimum freewheeling speed (nimin) and a maximum one (nimax)
  • Integrated torque limiter on RDBK — multi-disc brake in oil, set at the factory, which allows repeated reverse rotation to unload a conveyor before work
  • Wide torque range — from 2.5 Nm on CSK size 8 up to 250,000 Nm on RSCI 300 II-M
  • Direct mounting in the gearbox — the RSCI and RSXM series accept the common lubrication from the housing, usually oil mist

Which Stieber codes and series are requested most often?

CodeDescription
CSK12Freewheel with combined bearing 6201, 9.3 Nm, up to 10,000 min⁻¹
CSK25Freewheel with combined bearing 6205, 85 Nm, up to 5,200 min⁻¹
CSK40Freewheel with combined bearing, 325 Nm, up to 3,000 min⁻¹
NF 50Built-in roller freewheel, 2,375 Nm
AA 100Built-in roller freewheel, 15,000 Nm
AL 50-G3Self-contained roller unit, 2,125 Nm, up to 3,400 min⁻¹
AL 100-G4Self-contained roller unit, 20,000 Nm, up to 1,500 min⁻¹
RSCI 50Backstop with centrifugal sprags, 1,400 Nm
RSCI 100Backstop with centrifugal sprags, 10,500 Nm
RSCI 300 II-MLarge-size backstop, 250,000 Nm
RIZ 50Backstop with centrifugal sprags on bearings, 1,400 Nm
RDBK 110-28Backstop with torque limiter, 2,300 Nm
RDBK 280-83Backstop with torque limiter, 40,000 Nm

Where is Stieber equipment used?

  • Large inclined conveyors — RDBK backstops in systems with two or more drives sharing the reverse load
  • Industrial fans, pumps and turbines — AL..G freewheels in dual or standby drives
  • Industrial gearboxes — RSCI and RSXM backstops fitted in the gearbox housing
  • Slow-running drives on large machines — RSCI 180–300 as a one-way clutch
  • Electric motor drives — compact CSK freewheels, with integrated bearing

How do we supply Stieber in Romania?

For Stieber we can quote CSK, NF and AA freewheels, AL..G self-contained units and RSCI, RSXM and RDBK backstops, supplied to order. The lead time is usually 1–4 weeks; for large sizes or for RDBK with a torque limiter set on request it may be longer. For a correct quotation we need the type and size on the part, the nominal torque or the locking torque, the maximum and minimum speed in freewheeling operation, the shaft diameter, the direction of rotation (R or L) and the type of lubrication.

The replacement size depends on the type, nominal torque, limit speeds and direction of rotation of the existing unit, and the RDBK limiter is set at the factory to the required value.

Frequently asked questions about Stieber

What does Stieber make?

Stieber makes roller or sprag freewheels, one-way clutches and backstops. The programme includes CSK freewheels with combined bearing, NF and AA built-in freewheels, AL..G self-contained units and backstops with centrifugally lifted-off elements, such as RSCI, RSXM, RIZ and RDBK.

How do I choose between a built-in freewheel and one with a combined bearing?

CSK has the bearing integrated and fits directly between the shaft and the housing, at low nominal torques, up to 325 Nm. NF and AA have no bearings of their own and require lubrication and sealing from the installation, but reach much higher torques. Send the torque, the speed and the mounting space.

Can you source Stieber freewheels in Romania, and how quickly?

They are supplied to order. The usual lead time is 1–4 weeks, depending on the series and size. An RDBK with a torque limiter set on request or a large AL..G unit may take longer; the exact lead time is stated in the quotation.

Can I replace an old backstop with an RSCI or RDBK?

It can be checked on the basis of the type and size on the old part, the shaft diameter, the locking torque, the direction of rotation and the minimum freewheeling speed. A direct replacement is confirmed after comparing these data and the mounting dimensions.

What should I send for a quotation on an RDBK conveyor backstop?

Send the shaft diameter, the locking torque the unit must take, the number of drives sharing the reverse load, the speed in normal operation, the direction of rotation and, if you wish, manual hydraulic release. The limiter is set at the factory to the required value.

How do I request a Stieber quotation?

Send the Stieber code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Stieber Clutch (manufacturer documentation)