Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

TDK Electronics supplier in Romania

For TDK Electronics we quote common-mode chokes in D, E, U, frame and ring designs, SIFI EMC mains filters, sine-wave output filters and mains and dv/dt coils for converters; for a quotation we need the current, the voltage and the order code.

Headquarters: Munich, Germany

Request a quote

Who is TDK Electronics and what does it make?

TDK Electronics is a manufacturer of electronic components based in Munich, Germany. Our offer covers components for limiting electromagnetic interference in power electronics: common-mode chokes for supply lines, EMC mains filters, sine-wave output filters for frequency converters and mains or output coils. They limit the noise that converters and switched-mode power supplies send into the mains and towards the motor.

The current-compensated common-mode chokes for supply lines are made with a D, E, U, frame or ring core, for 250 or 300 V AC and, with the frame core, also 500 V DC; the inductance ranges from 0.12 mH to 100 mH, and the current from 0.3 A to 36 A. The mains filters in the SIFI series (A to H) differ in insertion attenuation, normal, increased, high or very high, for 1–36 A, while the filters for converters go up to 1,600 A. The sine-wave output filters, of 4–390 A and 230/400, 300/520 or 400/690 V, are mounted at the converter output; the dv/dt coils and the mains coils range from 4 A to 1,500 A.

The applications are frequency converters, rectifiers, industrial power supplies and drives with long cables to the motor. For an accurate quotation, the rated current, the voltage, the number of lines, the filter type, the attenuation required and the order code on the existing component matter.

What do we supply from the TDK Electronics range?

ProductDescription
Common-mode chokes for supply linesCurrent-compensated chokes, with D core (B82731, B82732, B82734), E core (B82731T), U core (B82730), frame core (B82732F, B82733) or ring core (B82721, B82723–B82725). The inductance is 0.12–100 mH, the current 0.3–36 A, the voltage 250 V AC or 300 V AC.
SIFI EMC mains filtersSeries of two-line mains filters: SIFI-A and SIFI-F (normal attenuation), SIFI-B and SIFI-G (increased), SIFI-D and SIFI-E (high), SIFI-C and SIFI-H (very high). The currents range from 1 to 36 A, and the board-mounted filters start from 1.4 A.
Sine-wave output filters and SineFormerSine-wave filters for three-phase systems, of 4–390 A and 230/400, 300/520 or 400/690 V, in B84143V codes, including the SineFormer EMC filters of 6–320 A and the IP21 enclosure B84143Q. They are mounted at the output of the frequency converter.
Coils for power electronicsThree-phase dv/dt output coils (B86301U, 8–1,500 A), mains coils for converters (B86310A, 8–570 A; B86305L, 4–900 A) and mains coils for converters with active supply (B86306A, 14–418 A), with relative voltage drops between 0.65% and 10%.

Why TDK Electronics?

  • Common-mode chokes with four core types and inductances from 0.12 to 100 mH — the design is chosen by space, current and frequency
  • SIFI mains filters from A to H in insertion attenuation steps — normal, increased, high and very high, between 1 and 36 A
  • Filters for converters up to 1,600 A and 2-line filters for high-voltage DC inverters of 200 and 400 A
  • Sine-wave output filters of 4–390 A for 230/400, 300/520 and 400/690 V, including SineFormer versions
  • dv/dt output coils and mains coils for converters, between 4 and 1,500 A — for the output and for the input of the converter

Which TDK Electronics codes and series are requested most often?

CodeDescription
B82731H / B82731MCommon-mode choke with D core, 3.3–100 mH
B82732R / B82732WCommon-mode choke with D core, 0.4–2.2 A
B82734R / B82734WCommon-mode choke with D core, 0.7–4.6 A
B82731TCommon-mode choke with E core
B82730G / B82730UCommon-mode choke with U core
B82732FCommon-mode choke with frame core, 300 V AC / 500 V DC
B82725S2Common-mode choke with ring core, 6–36 A
B84111ASIFI-A mains filter, normal attenuation
B84113HSIFI-H mains filter, very high attenuation, 3–36 A
B84142A*S081Filter for converters, 180–1,600 A
B84252B*A2-line filter for high-voltage inverters, 400 A
B84143V*R229Sine-wave output filter for three-phase systems
B84143V*R127SineFormer EMC output filter, 6–320 A
B86301UThree-phase dv/dt output coil, 8–1,500 A
B86310AMains coil for converters, 8–570 A
B86306AMains coil for converters with active supply

Where is TDK Electronics equipment used?

  • Frequency converter drives — output filters and dv/dt coils
  • Power electronics — EMC mains filters and mains coils
  • Industrial switched-mode power supplies — common-mode chokes on supply lines
  • High-voltage DC inverters — 2-line filters of 200–400 A
  • Installations with long cables to the motor — sine-wave filters

How do we supply TDK Electronics in Romania?

From the TDK Electronics programme we can quote common-mode chokes, EMC mains filters, sine-wave output filters and coils for converters, by order code. For an accurate quotation, send the full code (for example B84143V…, B82731…), the rated current, the voltage, the number of lines, the switching frequency of the converter and the length of the cable to the motor. The components are supplied to order, usually in 1–4 weeks; some standard items: 24–72 h when the item is in stock, locally or at the supplier. For codes with high currents, depending on the specification, the lead time can be longer. The exact lead time appears in the quotation.

The filter or coil for a specific converter is selected based on the rated current, the voltage and the switching frequency.

Frequently asked questions about TDK Electronics

What EMC components does TDK Electronics make?

TDK Electronics makes common-mode chokes, EMC mains filters (the SIFI series and filters for converters), sine-wave output filters and mains or dv/dt coils for power electronics. For each type there is an order code that encodes the type, the current and, sometimes, the voltage.

How do I choose a sine-wave output filter for a converter?

The filter is chosen by the rated current of the converter (from 4 to 390 A), the mains voltage (230/400, 300/520 or 400/690 V) and the switching frequency. For a long cable to the motor, the SineFormer filters also fit. Send us the data from the converter nameplate.

Do you supply TDK Electronics components in Romania, and how fast?

Yes, to order: the components usually arrive in 1–4 weeks. Standard items can ship in 24–72 h when the item is in stock, locally or at the supplier. For codes with high currents, depending on the specification, the lead time can be longer. We confirm the exact lead time in the quotation.

I have an old filter or choke; what data do you need for a replacement?

The full code from the component, of the form B82731H or B84143V…, the rated current, the voltage and the number of lines, plus a photo. With these data we check whether the item is still in the programme or has been replaced by a new code.

What do I need to specify for a quotation on a SIFI mains filter?

The load current (1–36 A), the voltage, the insertion attenuation you want (normal, increased, high or very high) and whether the mounting is on a board or on a chassis. SIFI-A and SIFI-F have normal attenuation, SIFI-C and SIFI-H very high; tell us the noise to be eliminated.

How do I request a TDK Electronics quotation?

Send the TDK Electronics code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: TDK Electronics (manufacturer documentation)