Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Teledyne ISCO supplier in Romania

For Teledyne ISCO we quote Signature flow meters, 2150 and 2150EX modules, TIENet 310 Ex, 330, 350 Ex and 360 sensors and LaserFlow Ex; we need the channel shape, the flow depth, the zone classification and the required outputs.

Request a quote

Who is Teledyne ISCO and what does it make?

Teledyne ISCO makes instruments for measuring flow in open channels and partially filled pipes, in sewer networks, wastewater treatment plants and industrial discharges. From the ISCO range we quote the flow meters and their sensors, without the company's other lines. The problem is measuring flow where there is no full pressurised section: the instrument has to find both the water level and its velocity, and the combination of the two gives the flow. Conditions are harsh, with grease, dirt, deposits and, at times, an explosive atmosphere in manholes, digesters or tanks.

The Signature flow meter works with several measurement technologies at the same time, is compatible with Flowlink software and works with interchangeable TIENet modules: 304, with contact outputs, 306, a sampler interface, 307, with analogue inputs, and 308, with analogue outputs. Sensors are chosen according to the application. The 2150 module measures average velocity and level with a low-profile sensor, usable even at flow depths of 25 mm. 2150EX is the intrinsically safe version, with IP68 protection class, in a version for zones 0 and 1 with explosion risk, according to the manufacturer's documentation, with the 2194EX network module and the 2196EX battery module. TIENet 310 Ex is an ultrasonic level sensor, TIENet 330 is a bubbler level module, and TIENet 350 Ex is an area-velocity sensor. TIENet 360 and LaserFlow Ex measure velocity without contact with the water and have zero dead zone, LaserFlow Ex being intrinsically safe, in a version for explosion-risk zones according to the manufacturer's documentation.

The applications are infiltration and inflow studies, sewer network overflows, and inlet, process and outlet flows at treatment plants and industrial discharges. The quotation starts from the module or sensor code or, for a new installation, from the channel shape, the flow depth and the zone classification.

What do we supply from the Teledyne ISCO range?

ProductDescription
Signature flow meter with TIENet modulesModular flow meter, with several simultaneous level and velocity technologies, cellular or Ethernet communication and Flowlink compatibility. TIENet modules 304, 306, 307 and 308 add contact outputs, a sampler interface, analogue inputs and analogue outputs.
2150 Area Velocity Module and 2150EX2150 measures velocity and level with a low-profile sensor, even in flows 25 mm deep. 2150EX is the intrinsically safe version, IP68 (NEMA 4X, 6P), for explosive atmospheres, ATEX category 1G, with an area-velocity sensor that can be replaced in the field without recalibration.
TIENet 310 Ex, 330, 350 Ex and 360 sensors310 Ex is an ultrasonic level sensor, 330 is a bubbler level module, 350 Ex is an intrinsically safe area-velocity sensor, and 360 is a non-contact velocity sensor. The modules with measurement approvals stated in the manufacturer's documentation, together with Signature, include 310 Ex, 330, 350 Ex and 360.
LaserFlow ExIntrinsically safe non-contact velocity sensor, with level measurement, for class 1 division 1, zone 0 and ATEX category 1G. It has an IP68 housing, zero dead zone, and allows measurement at one or more points below the liquid surface, without manual profiling.

Why Teledyne ISCO?

  • Several technologies in one flow meter — Signature combines level and velocity measurement methods at the same time, with interchangeable TIENet modules
  • Low-profile sensor — 2150 measures velocity even in flows 25 mm deep, in small pipes and at low flow rates
  • Versions for explosive atmospheres — 2150EX, TIENet 310 Ex, TIENet 350 Ex and LaserFlow Ex for manholes, digesters and tanks
  • Non-contact measurement — LaserFlow Ex determines velocity and level without touching the water, with zero dead zone from the measuring point
  • Configuration software — Flowlink downloads and analyses the flow data of Signature and 2150 modules

Which Teledyne ISCO codes and series are requested most often?

CodeDescription
SignatureModular flow meter with several simultaneous technologies
2150Area-velocity flow module with low-profile sensor
2150EXIntrinsically safe area-velocity flow meter, in a version for explosion-risk zones
2194EXNetwork interface module for 2150EX
2196EXBattery module for 2150EX
TIENet 304Contact output card
TIENet 306Sampler interface, triggering and pacing
TIENet 307Analogue input card
TIENet 308Analogue output card
TIENet 310 ExUltrasonic level sensor for Ex zones
TIENet 330Bubbler level module
TIENet 350 ExArea-velocity sensor for Ex zones
TIENet 360LaserFlow non-contact area-velocity sensor
LaserFlow ExIntrinsically safe non-contact velocity sensor

Where is Teledyne ISCO equipment used?

  • Sewer networks — infiltration and overflow studies, in small and large pipes
  • Wastewater treatment plants — inlet, process and outlet flow
  • Industrial discharges — flow of discharged process water
  • Manholes and digesters — level and flow in potentially explosive atmospheres

How do we supply Teledyne ISCO in Romania?

We can quote Teledyne ISCO Signature flow meters, 2150 and 2150EX modules, TIENet 310 Ex, 330, 350 Ex and 360 sensors, and LaserFlow Ex, with accessories and network modules. We supply them to order, usually in 1–4 weeks; depending on the specification, the lead time can be longer for Ex configurations. For a correct quotation, send us the type and size of the channel or pipe, the flow depth, the expected velocity, the zone classification (Ex or not), the power supply, the required outputs and the model of the existing instrument.

The configuration is set from the channel shape, the minimum flow depth and the classification of the installation zone.

Frequently asked questions about Teledyne ISCO

What does Teledyne ISCO make for flow measurement?

Teledyne ISCO makes flow meters for open channels and partially filled pipes: Signature, the 2150 and 2150EX modules, TIENet level and area-velocity sensors and the LaserFlow Ex non-contact sensor. The data is downloaded and analysed with Flowlink software.

How do I choose between a submerged sensor and a non-contact one?

A submerged sensor, such as the one on the 2150 module, measures velocity and level from inside the stream and suits small or dirty flows. LaserFlow measures without contact and avoids deposits. Send us the channel shape, the depth, the velocity and how dirty the water is.

Do you supply Teledyne ISCO instruments in Romania and how fast?

The instruments are supplied to order, and the lead time is usually 1–4 weeks. A module can ship in 24–72 h when the item is in stock, locally or at the supplier. Ex configurations may take longer, depending on the specification; we confirm the lead time in the quotation.

Can I replace an older 2150 module with a current model?

It is checked from the model, the sensor and the connecting cable. Compatibility is confirmed from data, not from the name; send us the serial number from the module, the cable length and a photo of the installation, and we establish whether the existing area-velocity sensor can be kept with a current module.

What data do I need to send for a quotation on an open-channel flow meter?

Send the type and size of the channel or pipe, the minimum and maximum flow depth, the expected velocity, how dirty the water is, the zone classification (Ex or not), the power supply, the required outputs and whether you are doing temporary studies or a permanent installation.

How do I request a Teledyne ISCO quotation?

Send the Teledyne ISCO code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Teledyne ISCO (manufacturer documentation)