Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Weigel supplier in Romania

For Weigel we quote analogue and digital panel meters, large displays, 2.2, 4.0 and 5.0 series measuring transducers, WPM 800 touch multifunction instruments and WRC100 Rogowski coils; we need the measured quantity, the range and the size.

Headquarters: Cadolzburg, Germany

Request a quote

Who is Weigel and what does it make?

Weigel Meßgeräte GmbH from Cadolzburg makes electrical and electronic measuring technology for panels and installations. The range includes analogue and digital panel meters, large displays, multifunction instruments, measuring transducers, shunts and accessories.

The analogue panel meters are grouped in series: the K series with a plastic housing and interchangeable scale, the M series for general use, instruments for power systems, instruments for process systems and limit signalling transmitters. They are available moving-coil, moving-iron, rectifier type, reed frequency meters and bimetal instruments, in sizes of 48, 72, 96 and 144, with a 90° or 240° scale.

The digital instruments start with small displays with a digit height of 10 or 14 mm, for example DMA 10 and DMA 14, and reach large displays of 40 to 300 mm, with analogue, parallel, serial RS232, RS422, RS485 or Profibus inputs. Measuring transducers convert current, voltage, active and reactive power into a standard signal; the 5.0 series is for 1000 V DC installations, category CAT III. WPM 800 touch is a multifunction instrument with Rogowski coils.

For power systems, the range includes synchroscopes, phase sequence indicators, operating hour counters and instruments with two measuring systems. For processes, there are narrow-profile instruments, instruments for thermocouples and limit signalling transmitters. When ordering, what matters is the series, the front size, the scale range and, for displays, the input type.

What do we supply from the Weigel range?

ProductDescription
Analogue panel metersK and M series, moving-coil, moving-iron, rectifier type, frequency meters, bimetal instruments and power and power factor instruments, in sizes 48, 72, 96 and 144. There are also versions for power systems and for process systems.
Digital panel meters and large displaysProgrammable displays DMA 10, DMA 14, DA12-NA40 and DPA08–25, displays with serial or parallel input, and large displays DA40 to DA300, with digits of 40 to 300 mm. Inputs include current, voltage, Pt100, frequency, RS485 and Profibus.
Measuring transducersTransducers for current and voltage (AU 2.0, A1U 2.2, AUE, AUD), for single-phase and three-phase active and reactive power (EW 4.0, DGW 4.0, VGW 4.0), for frequency (FU 2.2) and for phase angle (CU 2.2). The 5.0 series is for 1000 V DC.
Multifunction instruments and shuntsThe WPM 800 touch multifunction instrument with Rogowski coils, from the WRC100 family, for measuring alternating current, and shunts for direct current. They are chosen according to the rated current and the environment in the electrical panel.

Why Weigel?

  • Analogue panel meters in K and M series, with a 90° or 240° scale — the old instrument is replaced with the same cut-out size
  • Large displays from 40 to 300 mm, with analogue, serial or Profibus input — the information is visible from a distance in the hall
  • Measuring transducers for current, voltage, active and reactive power — the signal reaches the PLC normalised
  • 5.0 series transducers for 1000 V DC installations, CAT III — for direct current systems
  • Synchroscopes, phase sequence indicators and operating hour counters — panel instruments for power systems

Which Weigel codes and series are requested most often?

CodeDescription
PQ 96 KMoving-coil panel meter, K series
EQ 96 KMoving-iron panel meter, K series
LSP 96Moving-coil instrument, 240° scale, M series
WQ 96 RSMoving-iron instrument, M series
SY 96 SSynchroscope for power systems
DMA 14Small digital display with 14 mm digits
DA12-NA40/AProgrammable digital display, 14 mm digits
DA75-NAxx/AxxxELarge display with 75 mm digits
A1U 2.2Measuring transducer for alternating current and voltage
AUD 2.2Measuring transducer for direct current quantities
AUD 5.0Transducer for 1000 V DC installations, CAT III
EW 4.0Single-phase power transducer
DGW 4.0Three-phase power transducer, three-wire network
FU 2.2Measuring transducer for frequency
WPM 800 touchMultifunction instrument with Rogowski coils
WRC100Rogowski coils

Where is Weigel equipment used?

  • Electrical panels and substations — panel meters for voltage, current and frequency
  • Power systems — synchroscopes, rotating field direction indicators and triple measuring instruments
  • Direct current installations — measuring transducers for 1000 V DC
  • Process automation — process instruments with thermocouple or Pt100 input
  • Production halls — large displays with serial or Profibus input

How do we supply Weigel in Romania?

We can quote analogue and digital panel meters, large displays, measuring transducers, WPM 800 touch multifunction instruments and WRC100 Rogowski coils from Weigel, in the series you need. For a correct quotation we need the code from the instrument, for example PQ 96 K or A1U 2.2, the measured quantity, the range, the front size, the supply and the output signal or the interface. If you are replacing an old instrument, a photo of the dial is enough to start with. Instruments are supplied to order, usually in 1–4 weeks; they can ship in 24–72 h when the item is in stock, locally or at the supplier.

The scale and the range are prepared to your values, so we start the quotation from the nominal value of the measured circuit.

Frequently asked questions about Weigel

What are PQ 96 K, EQ 96 K, LSP 96 and WQ 96 RS at Weigel?

Weigel from Cadolzburg makes analogue and digital panel meters, large displays, multifunction instruments, measuring transducers, shunts and accessories. The instruments are used in electrical panels, power systems and process installations, for electrical quantities and process signals. PQ 96 K is a moving-coil panel meter and EQ 96 K a moving-iron one, both from the K series; LSP 96 is moving-coil with a 240° scale and WQ 96 RS moving-iron, both from the M series.

How do I choose a measuring transducer for current or power?

Choose according to the measured quantity: current and voltage with AU, A1U, AUE and AUD, active or reactive power with EW, DGW and VGW, frequency with FU 2.2. Send the range, the type of network, the auxiliary supply and the output signal required.

Do you supply Weigel instruments in Romania and how fast?

Yes, Weigel instruments are supplied to order, usually in 1–4 weeks. An instrument can ship in 24–72 h when the item is in stock, locally or at the supplier. Special scales and large displays may need more time.

Can I replace an old panel meter with one from the K or M series?

Yes, if the front size (48, 72, 96 or 144), the measuring principle and the scale range match. Send the code from the instrument or a photo of the dial and the dimensions of the cut-out, and we work out which series fits.

What should I send for a quotation on a DA75-NAxx/AxxxE large display?

Send the digit height you want, between 40 and 300 mm, the input type, for example analogue, serial or Profibus, the number of digits, the supply and the mounting conditions. For a replacement, add the code of the existing display, for example DA75 or DA150. DA75-NAxx/AxxxE is a large display with 75 mm digits.

How do I request a Weigel quotation?

Send the Weigel code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Weigel Meßgeräte GmbH (manufacturer documentation)