Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Welch Vacuum supplier in Romania

For Welch Vacuum we quote WOB-L piston pumps, MP and MPC diaphragm pumps, DuoSeal and CRVpro rotary vane pumps and the SCSpro 15 scroll pump; for a quotation we need the code on the plate, the vapours pumped, the vacuum and the flow rate.

Request a quote

Who is Welch Vacuum and what does it make?

Welch Vacuum makes vacuum pumps for laboratories and for small and medium-capacity industrial processes. The programme is organised by technology, and the choice of technology matters more than the choice of model: the WOB-L dry piston pumps (for example 2511, 2522, 2534, 2561) run without oil and handle water vapour well; the diaphragm pumps (MP, MPC, Gemini 2050 and 2060, DryFast 2037 and 2044) have the gas-contact parts made of chemically resistant materials, for example PTFE; the DuoSeal and ChemStar rotary vane pumps reach deep vacuum, with oil sealing; and the SCSpro 15 scroll pump offers dry vacuum, with no oil in the pumping chamber.

The differences show in the technical figures. The WOB-L series covers free flow rates from 0.39 cfm (WOB-L 2511) up to 10.6 cfm (WOB-L 2595) and an ultimate vacuum that goes down to 5 Torr on the two-stage models. The two-stage DuoSeal models, such as 1400 or 1402, state an ultimate vacuum of 0.0001 Torr, and the direct-drive CRVpro series ranges from 1.8 to 52.5 cfm. ChemStar is the corrosive gas version of the vane pumps, and some models have an explosion-proof motor version.

In practice, these pumps appear in quality control laboratories, with rotary evaporators, vacuum ovens, vacuum filtration and degassing, but also in production: vacuum forming of parts, leak tests, vacuum handling (pick and place) and evacuation of refrigeration systems, for which there is a dedicated DuoSeal model. The choice is made by the type of vapours, the vacuum needed and the flow rate, not by a preference for a particular technology.

What do we supply from the Welch Vacuum range?

ProductDescription
WOB-L, dry piston pumpsA family of oil-free vacuum and pressure pumps, with one stage (2511, 2522, 2534, 2546, 2585) or two stages (2561, 2567, 2581, 2595). They are used for filtration, drying, suction and vacuum forming of parts, but not for organic vapours, acids or bases.
MP and MPC, diaphragm pumps for chemical useOil-free diaphragm vacuum pumps, for laboratories and processes with solvents and acid vapours. The programme includes models such as MP 201 E, MPC 105 T and MPC 603 T, with flow rates from 0.28 to 2.3 cfm and an ultimate vacuum between 1.1 and 75 Torr.
DuoSeal and ChemStar, rotary vane pumpsOil-sealed pumps, in one or two stages, for deep vacuum: DuoSeal 1400, 1402, 1376, 1397. The ChemStar series (1400N, 1402N, 1376N) is intended for corrosive gases, and DuoSeal 1397 has the refrigeration version.
CRVpro and SCSpro 15CRVpro is the compact series of direct-drive rotary vane pumps, from CRVpro 2 to CRVpro 65, with XPRF versions. SCSpro 15 is the dry scroll pump, of about 280 l/min, with an ultimate vacuum close to 0.012 Torr.

Why Welch Vacuum?

  • WOB-L dry piston pumps: oil-free operation, with good tolerance to water vapour, in several models, from about 0.4 cfm up to 10.6 cfm
  • Diaphragm pumps for chemical vapours: the gas-contact parts are chemically resistant, so the vacuum stays clean when working with solvents
  • DuoSeal and ChemStar rotary vane pumps: ultimate vacuum of 0.0001 Torr on the two-stage models, with a version for corrosive gases
  • SCSpro 15 scroll pump: dry, self-cleaning vacuum, with an NW25 flange and no oil changes
  • Explosion-proof motor versions for several DuoSeal and ChemStar models: a choice for areas with an explosion risk

Which Welch Vacuum codes and series are requested most often?

CodeDescription
WOB-L 2511Dry piston pump, one stage, 0.39 cfm
WOB-L 2522Dry piston pump, one stage, 0.76 cfm (22 l/min), ultimate vacuum 100 Torr
WOB-L 2534Dry piston pump, one stage, 1.2 cfm
WOB-L 2561Dry piston pump, two stages, ultimate vacuum 5 Torr
WOB-L 2595Dry piston pump, two stages, 10.6 cfm
MP 201 EDiaphragm pump for chemical use, 1.06 cfm
MPC 105 TDiaphragm pump for chemical use, 0.71 cfm, ultimate vacuum 1.5 Torr
Gemini 2050Diaphragm pump for chemical use, 0.46 cfm
DryFast 2037Diaphragm pump with PTFE parts for chemical use, 1.8 cfm
DuoSeal 1400Two-stage rotary vane pump, 0.9 cfm, 0.0001 Torr
DuoSeal 1402Two-stage rotary vane pump, 5.6 cfm
ChemStar 1402NRotary vane pump for corrosive gases, 5.6 cfm
DuoSeal 1397Two-stage rotary vane pump, 17.7 cfm, refrigeration version
CRVpro 16Direct-drive rotary vane pump, 12.8 cfm
SCSpro 15Dry scroll pump, 9.9 cfm, ultimate vacuum 0.012 Torr, NW25 flange

Where is Welch Vacuum equipment used?

  • Laboratories: rotary evaporators, vacuum filtration, vacuum ovens and concentrators
  • Chemicals and pharmaceuticals: suction and degassing with solvent vapours, with diaphragm pumps
  • Refrigeration: evacuation of systems with DuoSeal pumps for refrigeration
  • Light production: vacuum forming of parts, pick and place, leak tests
  • Instrumental analysis: mass spectrometry and freeze-drying, with scroll or vane pumps

How do we supply Welch Vacuum in Romania?

From the Welch programme we can quote WOB-L piston vacuum pumps, MP and MPC diaphragm pumps, DuoSeal, ChemStar and CRVpro rotary vane pumps and the SCSpro 15 scroll pump. The pumps are supplied to order, usually in 1–4 weeks, and models can ship in 24–72 h when the item is in stock, locally or at the supplier. For a request, send us the code on the plate, the voltage and frequency, the vapours pumped, the vacuum and flow rate wanted and whether the installation site has an explosion risk. We confirm the exact lead time in the quotation.

The chemical compatibility of a pump with a mixture of vapours is confirmed once we receive the list of substances and their concentrations.

Frequently asked questions about Welch Vacuum

What kinds of vacuum pumps does Welch Vacuum make?

The programme covers four technologies: WOB-L dry piston, diaphragm for chemical use (MP, MPC, Gemini, DryFast), oil-sealed rotary vane (DuoSeal, ChemStar, CRVpro) and dry scroll (SCSpro 15). There are also peristaltic pumps, service kits and pump oils.

When do I choose a diaphragm pump and when a rotary vane one?

The diaphragm is chosen when the vapours pumped are solvents or acids and the vacuum needed does not go below a few Torr, with no oil to degrade. Rotary vane pumps go to deep vacuum, down to 0.0001 Torr on the two-stage DuoSeal. Describe the substances and the vacuum wanted and we propose the suitable family.

Do you supply Welch pumps in Romania, and how fast?

Yes, Welch pumps are supplied to order, and the lead time is usually 1–4 weeks. A Welch Vacuum model can ship in 24–72 h when the item is in stock, locally or at the supplier. Pumps with an explosion-proof motor or special configurations may need a longer lead time, depending on the specification; we fix it in the quotation.

My Welch pump has stopped; how do you find out which spare part I need?

Wear usually appears at the diaphragms, valves, vanes or oil, depending on the technology. Photograph the pump plate and note the serial number, voltage and frequency; if you have the service kit code, send that too. With these data we check the suitable kit or oil.

What data should I send for a quotation for a Welch pump?

Send the type of pump wanted or the code on the plate, the flow rate and vacuum needed, the nature of the vapours or gases, the ambient temperature and the electrical supply available. For areas with an explosion hazard, state this, because some models have an explosion-proof motor version.

How do I request a Welch Vacuum quotation?

Send the Welch Vacuum code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Welch Vacuum (manufacturer documentation)