Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Conveyor Belts

A conveyor belt is the flexible, closed-loop component that carries materials or products along a fixed route, driven by motorised drums and supported by rollers or a slider bed. It is chosen by material, rubber, PVC or modular structure, to suit the weight, temperature and type of product carried.

The structure of a conveyor belt usually has a tension layer (polyester fabric or steel, for high-strength belts) that takes the tensile force, and a cover layer (rubber, PVC or polyurethane) that contacts the product and the drums. Modular belts, made of articulated plastic plates, sometimes replace classic belts where high hygiene, tight curves or resistance to extreme temperatures are required. Width, thickness and cover type are chosen according to the load carried and the route (horizontal, inclined, curves). What distinguishes a good belt for industrial use: tensile strength relative to the length and incline of the route, the grip of the cover on the carried material (especially on slopes), the chemical and thermal resistance of the surface to the working environment and, in the food industry, the food-contact certification of the cover material. The belt joint (hot vulcanised, cold vulcanised or with a mechanical fastener) directly influences the service life and the tensile strength at the end point.

How to choose

Material and structure carried

The type of material (bulk, packaged, food, abrasive) sets the suitable belt type — rubber for heavy bulk, PVC for light packaging, modular for hygiene and tight curves.

Belt width and length, route

Width follows from the product size or the hourly flow of material carried, while the length and incline of the route (horizontal, climbing, curves) influence the cover type needed for grip.

Load and transport speed

The maximum weight per linear metre and the desired travel speed determine the required tensile strength of the reinforcing layer inside the belt.

Chemical and thermal resistance of the cover

The temperature of the carried product or environment (ovens, cold rooms) and any contact with oils or solvents determine the type of rubber or PVC used for the cover.

Hygiene requirements (food industry)

For direct food contact, a food-contact certified material that is easy to clean is required, often a modular plastic belt instead of classic rubber.

Belt end joint type

Hot vulcanising gives superior strength and service life, cold vulcanising is quicker for on-site fitting, and the mechanical fastener is the simplest but has lower strength and a visible weak point at each pass.

What to send for a quotation

  • The material or product carried and whether it needs food contact
  • The belt width and length, plus the route (horizontal, inclined, curves)
  • The load per linear metre and the desired transport speed
  • The working temperature and any contact with oils or chemicals
  • The type of drum and existing drive, if the belt replaces an old one
  • The quantity and the delivery date you need

Typical applications

  • Industrial conveyors
  • Sorting and packaging
  • Food industry
  • Logistics
  • Bulk material handling

Maintenance and spare parts

Typical wear appears on the cover surface (abrasion from the carried material) and at the belt end joint, which can come apart under repeated tension. The spare parts frequently requested are vulcanising kits or mechanical fasteners, plus a full-length spare belt for quick replacement. Periodic checks of correct tension and alignment on the drums prevent asymmetric wear and belt run-off.

Brands we quote for this product type

Frequently asked questions

What is the difference between a rubber conveyor belt and a modular one?

The rubber or PVC belt is continuous, flexible and suited to long routes with heavy loads or bulk materials. The modular belt, made of articulated plastic plates, allows tighter curves, is easier to clean and withstands frequent sanitising better, so it is preferred in the food industry, but it usually costs more at the same width.

How do I choose the right width and type of conveyor belt?

Width follows from the product size or the desired hourly material flow, while the belt type (rubber, PVC, modular) follows from the nature of the carried product and the hygiene or chemical resistance requirements. The route (curves, inclines) and the load per linear metre directly influence the cover type and the tension structure needed.

What should be sent for a quotation and how long does delivery of a conveyor belt take?

We need the carried material, the belt width and length, the route, the load per linear metre and the desired speed. Delivery is to order, typically 1–4 weeks, depending on the manufacturer, the available width and the joint type requested.

How often should the tension of a conveyor belt be checked?

A visual check and a check of alignment on the drums is usually made at short intervals after installation, then periodically as recommended by the manufacturer, because a belt that is too slack slips and wears unevenly, while one that is too tight overloads the drums and their bearings.

Updated: 2026-11-12