PULSEROLLER supplier in Romania
For PULSEROLLER we quote 24 V and 48 V motorised rollers from the Senergy and Pallet series, PGD gear motors, ConveyLinx and EQUBE controllers and Pulse Divert transfer units; the voltage and the connector type identify the item.
Who is PULSEROLLER and what does it make?
PULSEROLLER makes drive and control components for roller conveyors, at 24 V and 48 V: motorised rollers, gear motors, controllers and transfer units. Sales are handled from Leichlingen, Germany, and production is in Bulgaria. The whole range is built around modules that mount directly in the conveyor and are controlled by zone.
Motorised rollers are offered in three connection technologies, distinguished by the number of pins: Ai with 4 pins, JST with 9 pins and IDC with 5 pins. The series include Senergy-Ai at 24 V and 48 V, Pallet-Ai for pallets, the holding-brake roller, Senergy-JST and Senergy-IDC. PGD gear motors come in the versions PGD-Ai at 24 V and 48 V, PGD-Ai WashDown with IP66 sealing for wet areas, PGD-JST at 24 V and PGD-IDC.
ConveyLinx network controllers, at 24 V and 48 V, control two zones each and have versions for freezer use (DeepFreeze). Other modules are MotionLinx-Ai, ConveyProxy, the simple EQUBE-Ai and EZ-QUBE controllers and the input and output modules. The transfer units are Pulse Divert Switch 90, Pulse Divert Unit 90 and Pulse Pop-up Unit 30/45. For a quotation, the voltage, the connector type and the tube diameter matter.
What do we supply from the PULSEROLLER range?
| Product | Description |
|---|---|
| Motorised rollers | Senergy-Ai at 24 V and 48 V, Pallet-Ai for pallets, the holding-brake roller, Senergy-JST and Senergy-IDC. They are offered with options for tube material and covering, and with several types of torque transmission. |
| PGD gear motors | An alternative to pneumatic drives: PGD-Ai at 24 V and 48 V with a 4-pin M8 connector, PGD-Ai WashDown with IP66 sealing, PGD-JST at 24 V with a 9-pin JST connector and PGD-IDC for controllers from other manufacturers. |
| ConveyLinx controllers | Network controllers for two zones: ConveyLinx-Ai2 at 24 V and 48 V, Ai3-RC/FC and Ai3-FCM with insulation-displacement connection, on flat or round cable, Ai2 DeepFreeze and JST-B for JST rollers. ConveyProxy reduces the number of IP addresses needed. |
| Transfer units | Pulse Divert Switch 90, Pulse Divert Unit 90 (including in the DeepFreeze version) and Pulse Pop-up Unit 30/45. They are modules for branching or redirecting products on roller conveyor lines. |
Why PULSEROLLER?
- Three connection technologies, Ai, JST and IDC — the replacement item is identified by the number of pins
- Rollers and gear motors at 24 V and 48 V — the voltage is chosen to match the existing conveyor
- PGD-Ai WashDown version with IP66 sealing — suited to washed or wet areas
- ConveyLinx controllers for two zones — control is divided into zones along the conveyor
- DeepFreeze versions of controllers and transfer units — for cold stores
Which PULSEROLLER codes and series are requested most often?
| Code | Description |
|---|---|
| Senergy-Ai | Motorised roller 24 V or 48 V, Ai connector with 4 pins |
| Pallet-Ai | Motorised roller for pallet conveyors, 24 V or 48 V |
| Senergy-JST | Motorised roller with JST connector with 9 pins |
| Senergy-IDC | Motorised roller with IDC connector with 5 pins |
| PGD-Ai | Gear motor at 24 V or 48 V, M8 connector with 4 pins |
| PGD-Ai WashDown | Gear motor with IP66 sealing for wet areas |
| PGD-JST | Gear motor at 24 V with JST connector with 9 pins |
| PGD-IDC | Gear motor with integrated commutation electronics, 5-pin connector |
| ConveyLinx-Ai2 | Network controller for two zones, 24 V or 48 V |
| ConveyLinx-Ai3-FCM | Controller for two zones, with M12 connector |
| EQUBE-Ai | Simple motor controller for rollers at 24 V |
| PDU90 | Transfer unit Pulse Divert Unit 90 |
Where is PULSEROLLER equipment used?
- Internal transport — roller conveyors controlled by zone
- Branching and redirecting — Pulse Divert and Pop-up units
- Cold stores — DeepFreeze controllers and units
- Washed or wet areas — PGD WashDown gear motors
How do we supply PULSEROLLER in Romania?
We can quote PULSEROLLER motorised rollers, PGD gear motors, ConveyLinx controllers and transfer units for new conveyors or to replace a faulty roller. For a quotation, send the code from the roller or gear motor, the voltage of 24 V or 48 V, the connector type (Ai, JST or IDC), and the length and diameter of the tube. We supply to order, usually in 1–4 weeks; for larger orders the lead time may be longer and is shown in the quotation.
We check the compatibility between roller and controller in the quotation, because the voltage and the connector type must match.
Frequently asked questions about PULSEROLLER
What are the PGD and ConveyLinx series, the EQUBE controllers and the Pulse Divert units at PULSEROLLER?
PULSEROLLER makes 24 V and 48 V motorised rollers and PGD gear motors, ConveyLinx and EQUBE network controllers and Pulse Divert transfer units for roller conveyors. Sales are handled from Germany and production is in Bulgaria.
How do I tell the Ai, JST and IDC series apart?
The difference is the connector. Ai technology uses a 4-pin connector, JST has 9 pins and IDC has 5 pins. The roller and the controller must have the same technology. Send a photo of the connector or the code from the roller, and we check the matching pair.
Do you supply PULSEROLLER in Romania and how fast?
Yes. We supply the items to order, usually in 1–4 weeks. A roller or controller can ship in 24–72 h when the item is in stock, locally or at the supplier. For large quantities the lead time may be longer and is shown in the quotation.
Can I replace a pneumatic drive with a PGD gear motor?
Yes: PGD-Ai and PGD-JST are designed as replacements for pneumatic drives, with a 4-pin M8 connector or a 9-pin JST connector. Send the data of the current drive and the available voltage; we check whether a suitable PGD version exists.
What information do you need for a 24 V or 48 V Senergy-Ai or Pallet-Ai motorised roller?
Send the voltage (24 V or 48 V), the connector type, the useful length and the tube diameter, the material or covering wanted, the speed and the load per roller. If you have an existing roller, add the code from it and a photo. Senergy-Ai has a 4-pin Ai connector, and Pallet-Ai is the roller for pallet conveyors.
How do I request a PULSEROLLER quotation?
Send the PULSEROLLER code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: PULSEROLLER (manufacturer documentation)

