Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

REINTJES supplier in Romania

For REINTJES we quote WAF/LAF, WVS/WLS, WVSA and WVSFA marine gearboxes, AF and TME units for electric or hybrid drive and RTG industrial gearboxes; for a quotation we need the type, the reduction ratio, the power and the speed.

Founded in 1879 · Headquarters: Hameln, Germany

Request a quote

Who is REINTJES and what does it make?

REINTJES is a German gearbox manufacturer, founded in 1879, headquartered in Hameln. It makes two families of transmissions only in Germany: marine gearboxes, for powers from about 250 to about 40,000 kW, and industrial turbine gearboxes, of the RTG series, for 500–70,000 kW. Each unit goes through a test on an in-house test stand before delivery.

Marine gearboxes are chosen by power, speed, reduction ratio and duty rating. The WAF/LAF series, with a steel or cast housing, runs from models 164 to 7760; the WVS/WLS series, with an aluminium housing, reversing gearboxes with hydraulic control for fixed-pitch propellers, covers models 234–2240; WVSA and WVSFA have beveloid gearing, which creates an angular offset between the engine and the propeller shaft and allows a compact engine room layout. For commercial vessels, the duty rating has three levels: continuous, with no hour limit, for displacement hulls; medium, 4,000 hours per year; light, 2,500 hours per year. The AF series is intended for electric drives, and the TME Hybrid system fits a 40–280 kW electric motor-generator on the gearbox at the factory.

The RTG 200–1000 gearboxes are supplied stationary, for steam turbines, gas turbines and compressors, with input and output couplings, auxiliary oil pumps and a rotor turning device for start-up and cool-down. The marine range serves cargo vessels, ferries and passenger ships, tugs, pushers, work vessels, river vessels and dredgers. A replacement gearbox is identified by type, reduction ratio, power and speed, from the nameplate.

What do we supply from the REINTJES range?

ProductDescription
WAF / LAF marine gearboxesMarine gearboxes with a steel or cast housing, in models from 164 to 7760 (WAF/LAF 164–464, 665–1963, 2346–7760). They are used on ferries, tugs, work vessels, cargo ships and dredgers, for continuous or intermittent duty.
WVS / WLS, WVSA and WVSFA marine gearboxesGearboxes with an aluminium housing for lower powers, in models 234–2240, with hydraulic control. The WVSA and WVSFA versions use beveloid gearing for an angular offset between engine and propeller, useful in tight spaces.
Gearboxes for electric and hybrid driveThe AF series for electric propulsion and the TME Hybrid system, with a 40–280 kW electric motor-generator fitted on the gearbox. In PTI mode, the electric motor works in parallel with the diesel engine, with lower emissions and noise.
RTG industrial gearboxesTurbine gearboxes for stationary installation, in models RTG 200–1000, for steam turbines, gas turbines and compressors, from 500 to 70,000 kW. The delivery includes couplings, oil pumps and a rotor turning device.

Why REINTJES?

  • Power from about 250 to 40,000 kW in marine gearboxes — from small work vessels to cargo ships
  • WAF/LAF series from 164 to 7760 — steel or cast housing, with versions prepared for a hybrid system
  • Beveloid gearing on WVSA and WVSFA — angular offset between engine and propeller, for compact engine rooms
  • TME Hybrid — 40–280 kW electric motor-generator fitted at the factory on the gearbox, which shortens installation at the yard
  • RTG 200–1000 for 500–70,000 kW — couplings, oil pumps and rotor turning device included in the delivery

Which REINTJES codes and series are requested most often?

CodeDescription
WAF/LAF 164–464Marine gearbox for low powers
WAF/LAF 665–1963Marine gearbox with steel or cast housing
WAF/LAF 2346–7760Marine gearbox for high powers
WAF 563 (L)Model from the WAF series, with L version
WF 350–580Marine gearbox from the WF series
WVS/WLS 234/1–430/1Gearbox with aluminium housing, low powers
WVS/WLS 730/1L–1130 LAluminium gearbox, medium powers
WVSA 1542–1942Gearbox with beveloid gearing, angular offset downwards
WVSFA 442 U–1942 UGearbox with beveloid gearing, V-type mounting
AFSeries of gearboxes for electric drive
TME HybridHybrid system with a 40–280 kW motor-generator on the gearbox
RTG 200–1000Industrial gearbox for turbines and compressors, 500–70,000 kW

Where is REINTJES equipment used?

  • River and sea transport — gearboxes for ferries, tugs, pushers, river vessels and cargo ships
  • Dredging and port works — gearboxes for dredgers and work vessels
  • Steam or gas turbine power plants — RTG industrial gearboxes
  • High-power compressors — turbine gearboxes in stationary drives
  • Hybrid and electric propulsion — AF gearboxes and TME systems

How do we supply REINTJES in Romania?

We can quote REINTJES gearboxes and parts for them, based on the type and the nameplate of the existing unit. New gearboxes are configured equipment, so they are supplied to order, and depending on the specification the lead time can be longer. For a correct quotation send the gearbox type (for example WAF, WVS or RTG), the reduction ratio, the engine power and speed, the duty rating (continuous, medium or light), the type of propeller or driven machine and, for parts, the serial number.

Replacing an old model with a newer gearbox on the same shaft line is checked by type, ratio, flanges and speed.

Frequently asked questions about REINTJES

What does REINTJES make?

REINTJES makes in Germany marine gearboxes (from about 250 to 40,000 kW), gearboxes for electric and hybrid propulsion and RTG industrial gearboxes for steam turbines, gas turbines and compressors, for 500–70,000 kW. There are also control and monitoring interfaces.

How do I choose a marine gearbox by duty rating?

For commercial vessels there are three duty levels: continuous (no hour limit, displacement hull), medium (4,000 hours per year) and light (2,500 hours per year). Together with the power, the engine speed and the reduction ratio, the duty rating decides the series. Send us this data and the type of vessel.

Can you supply REINTJES gearboxes in Romania, and within what lead time?

Yes. REINTJES gearboxes are supplied to order. They are units configured for each vessel or installation, so, depending on the specification, the lead time can be longer; the date is confirmed in the quotation, once we have the engine data.

Can I replace an old REINTJES gearbox with a current model?

This can be checked; it is established from the nameplate data, not from dimensions. We need the type and the serial number from the nameplate, the reduction ratio, the engine power and speed, the direction of rotation and the input and output flanges. On that basis we determine whether a current model matches.

What data is needed for an RTG industrial gearbox?

The power and speed of the turbine and of the driven machine, the reduction ratio, the direction of rotation, the type of couplings and the lubrication method. State also whether the delivery must include the auxiliary oil pumps and the rotor turning device for start-up and cool-down.

How do I request a REINTJES quotation?

Send the REINTJES code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: REINTJES GmbH (manufacturer documentation)