Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

AEP transducers supplier in Romania

For AEP transducers we quote C2S, TS, F1 and FT1 load cells, TC4 and KAL force transducers, TP1, TP16 and TP22 pressure transducers and DMM2 digital pressure gauges; we need the full code, the capacity or range and the output type.

Founded in 1970 · Headquarters: Cognento, Italy

Request a quote

Who is AEP transducers and what does it make?

AEP transducers has designed and made instruments for measuring weight, force, torque, pressure and displacement since 1970, at Cognento, in Italy. The range is divided into load cells, force transducers, torque transducers, pressure transducers, digital pressure gauges and dynamometers, with display instruments and software applications added. They are found in weighing tanks and silos, on test benches, on presses and in hydraulic installations.

The load cells cover several designs: C2S and CLS for compression, TS and TCE for tension and compression, F1 and F3 of the bending beam type, FT1 and FT2 of the shear beam type. The ranges start at 1 kg for the TCA series and reach 500 t for the CLS. The UPC, UPF1 and UPFT1 weighing units put the cell into an assembly ready to mount under a tank or a hopper. For high forces there are the TC4, KAL, CLF and MICROKAL transducers, between 50 N and 5 MN, and the DNA2 is a compact dynamometer from 100 kg to 5 t.

The pressure transducers start at 100 mbar and reach 3000 bar. The TP1 and TP16 have mV/V output, the TP3, TP12 and TP14 have amplified output of 4–20 mA, 10 V or 5 V, and the TP22 has amplified output of 4–20 mA. The TPUSB has digital output, and the TP18 and TP8 exist in variants for temperatures of up to 150 °C. For differential pressure there are the DF2 and DF2R, and the TPL2C is an immersion level transducer. The DMM2, JET, BIT2, IDROSCAN2 and DFP digital pressure gauges complete the range for checks in the field and in the laboratory.

What do we supply from the AEP transducers range?

ProductDescription
C2S, TS, F1, FT1 load cellsCells for compression, tension, bending beam and shear beam, from a few kilograms to hundreds of tonnes. They have a sensitivity of 2 mV/V, and some series also exist in AMP variants with an M12 connector at the output, for weighing tanks and silos.
TC4, KAL, MICROKAL force transducersCompression and tension transducers between 50 N and 5 MN, in classes 00, 0.5 and 1 depending on the series. The TC4 has linearity of 0.05%, and the MICROKAL covers small forces, between 50 N and 5 kN. The DC-TC4 has an integrated digital indicator for local reading.
TP pressure transducersSeries such as TP1, TP16, TP22, TP14 and TPUSB, for gauge, absolute and vacuum pressure. The outputs are in mV/V, 4–20 mA, voltage or digital on USB, and the TP18 and TP8 also exist for temperatures of up to 150 °C.
DMM2, JET, BIT2 digital pressure gaugesPortable instruments for gauge, absolute or differential pressure, from 100 mbar to 3000 bar. The JET has a backlit display, data logging and wireless transmission, and the BIT2 also measures the temperature of the fluid.

Why AEP transducers?

  • Load cells from 1 kg to 500 t — the same family of components covers small bench weighing and large tanks
  • UPC, UPF1 and UPFT1 weighing units — the cell comes with the mounting elements for tanks and hoppers
  • Class 1 force transducers, with linearity of 0.05% on the TC4 — suited to test benches and calibrations
  • Pressure transducers from 100 mbar to 3000 bar — the range is chosen by the real process, from vacuum to high hydraulic pressures
  • Outputs in mV/V, 4–20 mA, voltage or USB — the signal matches the existing indicator or PLC

Which AEP transducers codes and series are requested most often?

CodeDescription
C2SCompression load cell, 100 kg–200 t, 2 mV/V
CBSCompression load cell, 250 kg–100 t
TSTension and compression cell, 10 kg–10 t
F1Bending beam cell, 2.5–200 kg
FT1Shear beam cell, 350 kg–7.5 t
UPCWeighing unit for C2S and CBS
TC4Force transducer, compression and tension, 2.5 kN–5 MN
KALForce transducer, 10 kN–2 MN
DNA2Compact dynamometer, 100 kg–5 t
TP1Pressure transducer, 10–700 bar, mV/V output
TP22Amplified pressure transducer, 100 mbar–3000 bar, 4–20 mA
TPUSBPressure transducer with digital USB output
DMM2Digital pressure gauge, 100 mbar–3000 bar
JETDigital pressure gauge with data logging and wireless transmission

Where is AEP transducers equipment used?

  • Industrial weighing — tanks, silos and hoppers equipped with UPC and UPF1 units
  • Test benches — checking force and torque with TC4 transducers and torque transducers
  • Hydraulics and pneumatics — measuring pressure with TP22, DMM2 or IDROSCAN2 on high-pressure circuits
  • Calibration and metrology — DNA2 dynamometers and digital pressure gauges with a high accuracy class
  • Automation and processes — pressure transmitters with 4–20 mA output on pipes and tanks

How do we supply AEP transducers in Romania?

From the AEP transducers range we can quote load cells, force transducers, pressure transducers and digital pressure gauges, both for new installations and for replacing an existing sensor. For an accurate quotation, send the code from the body, the capacity or pressure range, the output type (mV/V, 4–20 mA, USB) and the connector type. Items are supplied to order; the lead time is usually 1–4 weeks, and the exact date appears in the quotation after the configuration is checked.

We confirm in the quotation the version with or without an amplifier, because the same base code also appears with the AMP suffix.

Frequently asked questions about AEP transducers

What does AEP transducers make?

AEP transducers, from Cognento, Italy, makes load cells, force and torque transducers, pressure transducers from 100 mbar to 3000 bar, digital pressure gauges and dynamometers. The range also includes indicators such as STAR-F and STAR-P, used for reading the signals from sensors.

How do I choose between C2S, TS and F1 for a tank?

The choice depends on the construction of the support and the direction of the force. The C2S works in compression, the TS in tension and compression, and the F1 is a bending beam cell for small loads. For tanks there are also the UPC, UPF1 and UPFT1 units. Send the maximum mass and the number of support points.

How long does it take to bring a TP22 or TC4 transducer to Romania?

TP22 and TC4 transducers are ordered and usually arrive in 1–4 weeks. A part can ship in 24–72 h when the item is in stock, locally or at the supplier. Special configurations may need longer, and the exact date is confirmed in the quotation.

Can I replace an old pressure transducer with a current TP series?

It is possible if the range, the pressure type (gauge, absolute, vacuum), the output and the thread match. The TP1 and TP16 have mV/V output, the TP12 and TP14 have 4–20 mA, 10 V or 5 V, and the TP22 works with 4–20 mA. Send the nameplate of the old transducer and we check the suitable series.

What data do you need for a quotation on a load cell?

Send the code from the cell or the series wanted, the nominal capacity, the accuracy class, the output type and the cable length or connector. For tanks with several cells, add the number of cells and the maximum mass, and for the AMP series also state the output signal required.

How do I request a AEP transducers quotation?

Send the AEP transducers code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: AEP transducers S.r.l. (manufacturer documentation)