Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

AMETEK Solidstate Controls supplier in Romania

Industrial UPS, DPI and DSS inverters, chargers and RMBS switches

Founded in 1962 · Headquarters: Columbus, USA

Request a quote

Who is AMETEK Solidstate Controls and what does it make?

AMETEK Solidstate Controls is an American company founded in 1962, with its headquarters and main plant in Columbus, Ohio, which designs industrial uninterruptible power supplies (UPS), inverters, rectifiers and battery chargers, power conditioners, remote bypass switches and choke filters. It also has a plant in Rosario, Argentina, and the number of installed systems exceeds 50,000 in 66 countries. The products are designed for industrial installations and for loads that allow no interruption at all, with a design life of 30–40 years depending on the range, and with application engineering on each project.

In the inverter range, DPI is a double-conversion system with IGBT, digital control and optical fibre, made for industrial process control, while the DSS series uses the ferroresonant principle, which is very robust. The battery chargers include the high-frequency Ascend model, suited to remote locations without service close at hand, and a digital charger for UPS or for stand-alone use. The IPC series combines a precision voltage regulator and a shielded isolation transformer, and RMBS is a manual three-position bypass switch, with uninterrupted transfer between two sources in synchronism. For large installations there are also the pulse width modulation UPS units DPP+ and 3DPP+.

In the nuclear field, the UPS units are built for an operating life of 40 years, with environmental qualification, ageing analysis and seismic qualification to IEEE and IEC, in Class 1E, including as replacements for equipment whose original manufacturers no longer support it. This kind of equipment is used at power plants, in petrochemicals and refining, at pipeline transmission and pumping stations, in steelworks and in paper mills.

What do we supply from the AMETEK Solidstate Controls range?

ProductDescription
DPI and DSS invertersDPI is a full double-conversion inverter, with high-power IGBT, digital control, optical fibre and touchscreen, for industrial process control. The DSS series is ferroresonant, designed for extremely harsh environments.
DPP+ and 3DPP+ UPSIndustrial pulse width modulation UPS units, in a new generation, with a smaller footprint and smarter protections than the previous generation; they are part of the line of industrial UPS with environmental and seismic qualification.
Battery chargersThe high-frequency Ascend charger, suited to remote locations such as transmission and distribution stations, and the digital charger, for UPS units or for battery charging on its own.
IPC, ISL and RMBSIPC is a power conditioner with a precision voltage regulator and isolation transformer; ISL has short-circuit-protected ferroresonant transformers; RMBS is a three-position bypass switch, for isolating a UPS or an inverter.

Why AMETEK Solidstate Controls?

  • Design life of 30–40 years, depending on the range — equipment designed for long-term operation
  • Class 1E, seismic and ageing qualification to IEEE and IEC — for nuclear safety systems
  • DPI double-conversion and DSS ferroresonant inverters — for process control and for harsh environments
  • RMBS switch with uninterrupted transfer — isolates the UPS or inverter for maintenance, without stopping the load
  • Replacement of obsolete UPS units — solutions for systems whose original manufacturers no longer support them, with compatibility checked case by case

Which AMETEK Solidstate Controls codes and series are requested most often?

CodeDescription
DPIDouble-conversion inverter for process control
DSSFerroresonant inverter, robust series
DPP+Pulse width modulation UPS
3DPP+Variant of the DPP+ UPS, with pulse width modulation
AscendHigh-frequency battery charger
IPCPower conditioner with regulator and isolation transformer
ISLFerroresonant regulating transformer
RMBSManual remote bypass switch, 3 positions
RMBS-TRMBS with isolation transformer for bypass

Where is AMETEK Solidstate Controls equipment used?

  • Power and nuclear plants — industrial UPS, inverters and Class 1E chargers
  • Petrochemicals and refining — continuous supply for valves, pumps and control systems
  • Pipelines and transmission stations — UPS with Ascend charger for remote locations
  • Steelworks and paper mills — protection against voltage variations in continuous processes
  • Power transmission and distribution — safety supply for stations

How do we supply AMETEK Solidstate Controls in Romania?

We can prepare quotations for AMETEK Solidstate Controls industrial UPS units, inverters, chargers, IPC conditioners and RMBS switches. We supply the equipment to order; as these are systems configured per project, the lead time can be much longer and is confirmed in the quotation, while for small units or components it is, to order, usually 1–4 weeks. For a correct quotation we need the input and output voltage and frequency, the load power, the autonomy and the battery type, the safety class of the installation, the qualifications required and the environmental conditions. For replacing an old UPS, send the make, the model and the nameplate data.

Nuclear qualification of equipment ordered outside a project is clarified depending on the project.

Frequently asked questions about AMETEK Solidstate Controls

What products does AMETEK Solidstate Controls make?

AMETEK Solidstate Controls has made industrial UPS units, inverters (DPI, DSS), battery chargers, IPC and ISL power conditioners, RMBS bypass switches and Class 1E systems for nuclear since 1962, in Columbus, Ohio, designed for a service life of 40 years.

How do I choose between a DPI and a DSS inverter?

DPI is a full double conversion, with IGBT and digital control, for process control with demanding loads. DSS is ferroresonant, for harsh environments. The choice depends on the load, the voltage quality required and the environment; send us the power, the voltage and the application.

Do you supply AMETEK Solidstate Controls equipment in Romania, and how quickly?

Yes, to order. UPS systems are configured per project, so the lead time can be much longer; for components and small units it is, to order, usually 1–4 weeks. The exact lead time appears in the quotation, after the configuration is clarified.

Can an AMETEK UPS directly replace an older one from another manufacturer?

There are replacements for obsolete power systems, but compatibility depends on dimensions, voltages, the existing battery and interfaces. We confirm equivalence after checking; send the make, the model and the nameplate data of the current UPS.

What data do I need to send for a quotation on an industrial UPS?

State the input and output voltage and frequency, the load power in kVA or kW, the autonomy wanted, the battery type, whether uninterrupted transfer is needed, the safety class of the installation (for example 1E) and the environmental conditions at the installation site.

How do I request a AMETEK Solidstate Controls quotation?

Send the AMETEK Solidstate Controls code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: AMETEK Solidstate Controls (manufacturer documentation)