Benning Power Electronics supplier in Romania
For Benning we quote THYROTRONIC and TEBECHOP SE rectifiers, INVERTRONIC inverters, ENERTRONIC I UPS units and MCU 3000 monitoring units; we need the nameplate code, the battery voltage and type and the output current.
Who is Benning Power Electronics and what does it make?
Benning makes DC and AC power supply systems for critical installations: rectifiers and battery chargers, inverters, UPS units, DC–DC converters, chargers for traction batteries and lithium battery energy storage systems. For a quotation, send us the code from the nameplate of the rectifier or inverter, the battery voltage and the power of the loads.
For industry, the range has a few basic series. THYROTRONIC is a rectifier with a three-phase thyristor bridge, with 6 pulses as standard and 12 pulses optional, with an IU charging characteristic according to DIN 41773, for lead and NiCd batteries, with an automatic battery capacity test. TEBECHOP SE is a modular rectifier with 1800 W or 3000 W modules, up to five modules on a 19-inch rack, with n+1 redundancy, hot swapping and communication through SNMP, Modbus, Profibus or IEC 61850. INVERTRONIC is the industrial inverter for power plants, petrochemicals and the process industry, with up to eight units in parallel, and the ENERTRONIC I UPS has the VFI SS 111 classification under IEC/EN 62040-3.
Benning has a production unit in Romania at Buchin, near Caransebes, where rectifiers, inverters, UPS units, converters and chargers are made. The range is found in electrical substations, where it supplies the protections and controls from the accumulator batteries, in power plants, in refineries and in telecommunications installations. For replacements, the rectifier modules, the control boards and the MCU monitoring units must be chosen so that they match the existing system.
What do we supply from the Benning Power Electronics range?
| Product | Description |
|---|---|
| THYROTRONIC | Rectifier and battery charger with a fully controlled three-phase thyristor bridge, 6 pulses as standard and 12 optional, with an IU characteristic according to DIN 41773. It has programmable fast charging, an automatic test of the circuit and of the battery capacity and parallel operation with load sharing. |
| TEBECHOP SE | Modular rectifier for lead or NiCd battery supplies, with 1800 W or 3000 W modules, up to five on a 19-inch rack. It has n+1 redundancy, replacement of modules under voltage, a web interface, SNMP, Modbus, Profibus and IEC 61850. |
| INVERTRONIC | Industrial inverter for power plants, the oil, gas and petrochemical industry and the process industry, with sinusoidal voltage, low ripple and a good response to rapid load variations. Up to eight systems are connected in parallel, and busbars A and B are coupled without passing through bypass. |
| ENERTRONIC I | Double-conversion UPS with the VFI SS 111 classification under IEC/EN 62040-3, with IGBT in the rectifier and the inverter, an input power factor of at least 0.99 and current harmonic distortion below 5 %. Up to eight units work in parallel, for redundancy or higher power. |
Why Benning Power Electronics?
- Rectifiers for auxiliary services — THYROTRONIC, with a thyristor bridge in 6 or 12 pulses, charges lead and NiCd batteries according to the IU characteristic
- Modularity in rectifiers — TEBECHOP SE uses 1800 W or 3000 W modules with hot swapping and n+1 redundancy
- Integration in the substation automation — communication through SNMP, Modbus, Profibus and IEC 61850 on the modular rectifiers
- Class VFI SS 111 UPS — ENERTRONIC I, with IGBT semiconductors, an input power factor of at least 0.99 and current harmonic distortion (THDi) below 5 %
- Production in Romania — the unit at Buchin, near Caransebes, makes rectifiers, inverters, UPS units and chargers
Which Benning Power Electronics codes and series are requested most often?
| Code | Description |
|---|---|
| THYROTRONIC | Thyristor rectifier and charger, 6 or 12 pulses |
| TEBECHOP 3000 SE | Modular rectifier for a 19-inch rack |
| TEBECHOP 4000 | Convection-cooled rectifier |
| Power Cube NG TEBECHOP SE | TEBECHOP SE modular rectifier system |
| ADC modular | AC–DC modular rectifier system |
| INVERTRONIC | Industrial DC–AC inverter |
| INVERTRONIC compact SE | Compact industrial inverter |
| INVERTRONIC modular SE | Modular industrial inverter |
| ENERTRONIC I | VFI SS 111 UPS with IGBT |
| ENERTRONIC modular SE | Modular UPS |
| MCU 3000 | Monitoring and control unit |
| MCU 2500 | Monitoring and control unit |
| TRANSOTRONIC modular storage | Modular energy storage system |
| BELATRON | High-frequency chargers for traction batteries |
Where is Benning Power Electronics equipment used?
- Electricity transmission and distribution — DC supply of the protections and controls in substations
- Power generation — auxiliary DC and AC services in power plants
- Oil, gas and petrochemicals — inverters and UPS units for critical loads
- Telecommunications — rectifiers and power supply systems for network equipment
- Process industry and mining — safety power supplies for automation
How do we supply Benning Power Electronics in Romania?
We can quote THYROTRONIC and TEBECHOP SE rectifiers, INVERTRONIC inverters, ENERTRONIC UPS units, MCU monitoring units and replacement modules for existing Benning systems. For a correct quotation, send us the code and series from the nameplate, the nominal battery voltage and its type (lead or NiCd), the output current, the supply voltage and the communication protocol used in the substation. Benning equipment is supplied to order, usually in 1–4 weeks; for complete systems in a cabinet, depending on the specification, the lead time can be longer.
Parallel operation of a new rectifier module with the old ones is established from the codes and versions of the modules already fitted in the rack.
Frequently asked questions about Benning Power Electronics
What does Benning make in the field of industrial power supplies?
Benning makes rectifiers and battery chargers (THYROTRONIC, TEBECHOP SE), inverters (INVERTRONIC), UPS units (ENERTRONIC), DC–DC converters, chargers for traction batteries and energy storage systems, used in electrical substations, power plants, petrochemicals and telecommunications.
How is a Benning rectifier sized for an electrical substation?
The rectifier current results from the continuous consumption of the protections and controls plus the battery charging current, and the voltage from the nominal battery voltage. The battery type, lead or NiCd, also matters. Send us these values and the diagram of the auxiliary DC services.
How long does delivery of Benning equipment take?
Benning equipment is supplied to order, usually in 1–4 weeks. Modules and boards can ship in 24–72 h when the item is in stock, locally or at the supplier. For complete rectifiers or inverters in a cabinet, depending on the specification, the lead time can be longer.
Can I add a new module to an existing TEBECHOP system?
TEBECHOP SE systems are modular, with up to five modules per rack, so extension is possible if the rack has free space. We need the codes of the modules fitted, the version of the monitoring unit and the battery voltage, to confirm the compatible version before the quotation.
What data should I send for a rectifier or UPS quotation?
Send the code and series of the existing equipment, the battery voltage and type, the output current or power, the supply grid voltage, the degree of redundancy wanted and the communication protocol with the control system. For a UPS, also state the battery autonomy required.
How do I request a Benning Power Electronics quotation?
Send the Benning Power Electronics code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.
Request a quoteUpdated: 21 November 2026 · Sources: BENNING Elektrotechnik und Elektronik GmbH & Co. KG (manufacturer documentation)

