Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Cabur supplier in Romania

For Cabur we quote EFC push-in terminal blocks and UC floating terminal blocks, CSE single-phase power supplies, CEP programmable electronic protection devices, relay modules and SmartPrint+ marking systems; the item is identified by the full code on the label.

Founded in 1952 · Headquarters: Altare (Savona), Italy

Request a quote

Who is Cabur and what does it make?

Cabur is an Italian company based in Altare, near Savona, active since 1952 in connections for electrical panels. Its range is split into four areas: panel connections (push-in spring terminal blocks, screw terminal blocks, modular terminal blocks, distribution blocks), automation and control (power supplies, protection devices, EMI filters, signal converters, electromechanical and solid-state relay modules, UPS), industrial marking for cables and equipment, plus energy-transition components, namely photovoltaic switchboards and charging stations for electric vehicles.

Among the terminal blocks, the EFC series uses push-in technology: the conductor, rigid or flexible, with or without a ferrule, is inserted without a tool, and the coloured release buttons reduce wiring mistakes. The single-level EFC110GR terminal has a nominal cross-section of 1.5 mm² and, in the IEC version, withstands 630 V and 17.5 A. The UC series comprises floating spring terminal blocks with a locking lever.

The CSE series switch-mode power supplies are delivered with a 120–230 Vac input voltage and a 24 Vdc output, at currents from 1 A to 20 A. There are also versions with a 48 Vdc output at 10 A, 72 Vdc at 6.6 A and a 24 Vdc version at 40 A, with a 200–240 Vac input. The programmable electronic overcurrent protection is called CEP. For an accurate quotation, what matters is the full item code, the conductor cross-section, and the rated voltage and current.

What do we supply from the Cabur range?

ProductDescription
EFC push-in terminal blocks and UC floating terminal blocksThe EFC series is a line of push-in terminal blocks for tool-free wiring, with coloured release buttons. The EFC110GR terminal has a nominal cross-section of 1.5 mm², 630 V and 17.5 A according to IEC. The UC series brings together floating spring terminal blocks with a locking lever.
CSE switch-mode power suppliesSingle-phase power supplies with a 120–230 Vac input and a 24 Vdc output, from 1 A to 20 A, plus versions of 48 Vdc at 10 A, 72 Vdc at 6.6 A and 24 Vdc at 40 A. The codes follow the XCSE pattern followed by the power and the output voltage.
CEP electronic protection devices and relay modulesThe automation range includes the CEP programmable electronic overcurrent protection, electromechanical and solid-state relay modules, EMI filters, signal converters, UPS and accessories for mounting in automation panels.
SmartPrint+, Caburjet and SmartRoll+ industrial markingMarking systems for panels and equipment: SmartPrint+, Caburjet and SmartRoll+, plus manual numbering, holders, marking accessories and warning plates.

Why Cabur?

  • EFC push-in terminal blocks — fast wiring without a tool, for rigid or flexible conductors, with coloured buttons that limit mistakes
  • UC floating terminal blocks with spring and locking lever — the version for quick-access connections
  • CSE power supplies in several current steps — from 1 A to 40 A at 24 Vdc, with 48 and 72 Vdc versions
  • CEP programmable electronic protection — overcurrent protection with programmable parameters
  • SmartPrint+, Caburjet and SmartRoll+ industrial marking — the same company covers the terminal blocks and their marking in the panel

Which Cabur codes and series are requested most often?

CodeDescription
EFC110GRSingle-level push-in terminal block, grey, 1.5 mm², 630 V and 17.5 A according to IEC
EFCSeries of push-in terminal blocks for rigid and flexible conductors, with coloured release buttons
UCFloating spring terminal blocks with a locking lever
XCSE1024W024VAASingle-phase power supply, 120–230 Vac, 24 Vdc output at 1 A
XCSE1120W024VAASingle-phase power supply, 120–230 Vac, 24 Vdc output at 5 A
XCSE1240W024VAASingle-phase power supply, 120–230 Vac, 24 Vdc output at 10 A
XCSE1480W024VAASingle-phase power supply, 120–230 Vac, 24 Vdc output at 20 A
XCSE1480W048VAASingle-phase power supply, 120–230 Vac, 48 Vdc output at 10 A
XCSE1480W072VABSingle-phase power supply, 120–230 Vac, 72 Vdc output at 6.6 A
XCSE1960W024VAASingle-phase power supply, 200–240 Vac, 24 Vdc output at 40 A
CEPProgrammable electronic overcurrent protection
EVOSeries of charging stations for electric vehicles

Where is Cabur equipment used?

  • Electrical automation panels — connections for control, signal and power circuits
  • Photovoltaic installations — direct-current, alternating-current and combined switchboards, with accessories
  • Charging stations for electric vehicles — the EVO series and its accessories
  • Industrial automation — switch-mode power supplies and protection devices for control circuits
  • Panel assembly — marking of cables and terminal blocks

How do we supply Cabur in Romania?

We can quote Cabur terminal blocks, CSE power supplies, CEP protection devices, relay modules and marking consumables. For an accurate quotation, send the full code from the label or a photo of the terminal or power supply, the conductor cross-section, the working voltage and the required current. For power supplies, the input voltage and the desired output voltage help. Items are supplied to order, usually in 1–4 weeks; items can ship in 24–72 h when the item is in stock, locally or at the supplier. The exact lead time is stated in the quotation.

For the CSE series models, the output voltage and current are set by the full code, and for older or unclear codes we check the details in the quotation based on the label.

Frequently asked questions about Cabur

Which Cabur families are EFC, CSE, CEP and SmartPrint+?

EFC are push-in terminal blocks, CSE switch-mode power supplies, CEP electronic protection devices, and SmartPrint+ is part of the industrial marking. Cabur makes terminal blocks for electrical panels (push-in, screw, modular), power supplies, electronic protection devices, relay modules, industrial marking systems and components for photovoltaic switchboards and charging stations. The headquarters is in Altare, Italy, and the company has been active since 1952.

How do I choose an EFC series terminal block?

Start from the conductor cross-section and from the voltage and current of the circuit. For example, EFC110GR is a single-level terminal block of 1.5 mm², at 630 V and 17.5 A according to IEC. If you have a thicker conductor, send the cross-section and the desired colour, and we determine the suitable version.

Do you supply Cabur power supplies in Romania, and how fast?

Yes. CSE power supplies are supplied to order, usually in 1–4 weeks, and the requested version can ship in 24–72 h when the item is in stock, locally or at the supplier. Depending on the code, the lead time may be longer and we confirm it in the quotation.

Can I replace an old power supply with a CSE?

It is possible if the input voltage, the output voltage and the current match. The single-phase CSE series starts from 120–230 Vac with a 24 Vdc output between 1 A and 20 A. Send the label of the current power supply and we check compatibility before the quotation.

How do I order an EFC110GR terminal block or an XCSE1024W024VAA power supply?

For EFC110GR or XCSE1024W024VAA, state the full code from the label or the package, the quantity, the conductor cross-section for terminal blocks and, for power supplies, the input voltage, the output voltage and the current. If you do not have the code, a photo of the mounted item is enough as a starting point.

How do I request a Cabur quotation?

Send the Cabur code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Cabur (manufacturer documentation)