Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Breve Tufvassons supplier in Romania

For Breve Tufvassons we quote STM and TMM single-phase isolating and safety transformers, P3M three-phase transformers, PVS encapsulated versions and PSS DIN rail versions; for a quotation we need the power in VA and the primary and secondary voltages.

Founded in 1989 · Headquarters: Łódź, Poland

Request a quote

Who is Breve Tufvassons and what does it make?

Breve Tufvassons is a Polish transformer manufacturer, based in Łódź, active since 1989. We quote low-voltage transformers for control, isolation and safety: single-phase and three-phase, open (IP00) or encapsulated, for DIN rail mounting, portable, for power tools or cast in resin. Each series has a code of two or three letters (STM, TMM, TUM, TZB, PFM, PVS, PSS, P3M, T3M), which also appears in the full designation of the part on the nameplate.

The STM series comprises single-phase isolating or safety transformers, in open IP00 construction, with class I insulation and thermal class B (130 °C), between 30 and 2,500 VA, with a primary of 230 or 400 V at 50/60 Hz and a secondary of 24 to 230 V, made according to EN 61558-2-4 and EN 61558-2-6. TMM is the single-phase safety version, in the same open construction. P3M covers the three-phase side: IP23 encapsulated transformers from 1.5 to 100 kVA, with a primary of 100–1,000 V, a secondary of 24–500 V and a typical Dyn11 connection. For switchgear panels there are the PSS, PSZ and PTM series, on a DIN rail, and PVS is the IP54 encapsulated version.

Isolating transformers galvanically isolate the secondary from the mains and are used as protection against electric shock in higher-risk locations; safety transformers supply low-voltage circuits. They are installed in installations and in industrial equipment. For a quotation what matters is the power, the primary and secondary voltages, the frequency, the degree of protection, the number of phases and, for three-phase units, the connection.

What do we supply from the Breve Tufvassons range?

ProductDescription
STM and TMM — open single-phase transformersSingle-phase isolating (STM) and safety (TMM) transformers, IP00, for installation in plants and industrial equipment. STM: 30–2,500 VA, primary 230 or 400 V, secondary 24–230 V, class I insulation, thermal class B (130 °C), according to EN 61558-2-4 and -2-6.
P3M, T3M and 3FR — three-phase transformersP3M is an IP23 encapsulated three-phase isolating transformer, from 1.5 to 100 kVA, with a primary of 100–1,000 V and a secondary of 24–500 V. T3M is available with one or two chambers, 3FR is three-phase in IP00 construction; all are used for voltage adaptation for machines and panels.
PVS, PUM, PFM and PFN — encapsulated and portable transformersPVS is an IP54 encapsulated isolating transformer. PUM is an IP21 or IP23 encapsulated single-phase transformer, PFM and PFS are portable, and PFN is an encapsulated transformer for power tools.
PSS, PSZ and PTM — DIN rail transformersIsolating or safety transformers for DIN rail mounting, in the PSS, PSS N, PSZ and PTM series. They are mounted on a rail, in control panels, instead of the chassis mounting of the open STM and TMM series.

Why Breve Tufvassons?

  • STM from 30 to 2,500 VA, with a primary of 230 or 400 V — covers everything from small control circuits to high-consumption machines
  • Three-phase P3M, from 1.5 to 100 kVA, with a primary of 100–1,000 V and a secondary of 24–500 V — voltage adaptation for three-phase machines and panels
  • Made according to EN 61558-2-4 and EN 61558-2-6 for STM and TMM — the standards for isolating and safety transformers
  • Designs for every mounting location — open IP00, encapsulated IP23 or IP54, portable, on a DIN rail, cast in resin
  • Clear part designation — type, power in VA and voltages, for example STM 30 230/24 V, easy to order from the nameplate

Which Breve Tufvassons codes and series are requested most often?

CodeDescription
STMSingle-phase isolating transformer IP00, 30–2,500 VA
TMMSingle-phase safety transformer IP00
TUMSingle-phase transformer IP00
TZBSingle-phase transformer cast in resin
P3MThree-phase isolating transformer IP23, 1.5–100 kVA
3FRThree-phase transformer IP00
T3MThree-phase isolating transformer, one or two chambers
PFMPortable transformer
PFNEncapsulated transformer for power tools
PFSPortable transformer
PUMEncapsulated single-phase transformer IP21 and IP23
PVSEncapsulated isolating transformer IP54
PSSDIN rail transformer
PSS NDIN rail transformer, N version
PSZDIN rail transformer
PTMDIN rail transformer

Where is Breve Tufvassons equipment used?

  • Automation and control panels — control and isolating transformers on a DIN rail
  • Industrial machines and equipment — supply at the voltage required by the control circuits
  • Installations with an electric shock risk — isolating and safety transformers
  • Workshops — portable and encapsulated transformers for power tools
  • Three-phase installations — voltage adaptation with P3M and T3M transformers

How do we supply Breve Tufvassons in Romania?

From the Breve Tufvassons programme we can quote single-phase and three-phase control, isolating and safety transformers, in open, encapsulated or DIN rail construction. For a correct quotation send the designation from the nameplate or from the documentation (type, power and voltages), the number of phases, the frequency, the degree of protection wanted and, for three-phase units, the connection. For an old part, a photo of the nameplate also helps. The transformers are supplied to order, usually in 1–4 weeks; for special designs or high powers, depending on the specification, the lead time can be longer. The exact lead time is given in the quotation.

A special design (another voltage, another degree of protection or another thermal class) is established from the complete data of the application.

Frequently asked questions about Breve Tufvassons

What does Breve Tufvassons make?

Breve Tufvassons makes low-voltage transformers in Łódź: single-phase and three-phase isolating and safety transformers, encapsulated or open, portable, for DIN rail and for power tools. Each series has a letter code (STM, TMM, P3M, PVS, PSS), used when ordering.

How do I choose between an isolating transformer and a safety transformer?

The isolating one galvanically isolates the primary from the secondary and protects against electric shock in higher-risk locations; the safety one supplies low-voltage circuits. Tell us the application, the input voltage and the required output voltage, and we establish the series.

Do you supply Breve transformers in Romania and within what lead time?

Yes, to order: the transformers usually arrive in 1–4 weeks. For special designs or high powers, depending on the specification, the lead time can be longer. Standard parts: 24–72 h when the item is in stock, locally or at the supplier. The exact lead time appears in the quotation.

I have an old Breve transformer; how do I read the code and what data do you need?

The designation has the form type, power in VA and voltages, for example STM 30 230/24 V: STM series, 30 VA, primary 230 V, secondary 24 V. Send the full designation, the frequency and a photo of the nameplate; with them we check whether the item is still in the programme.

What do I need to specify for a quotation for a P3M three-phase transformer?

The power in kVA, the primary voltage (between 100 and 1,000 V) and the secondary voltage (between 24 and 500 V), the connection (usually Dyn11), the frequency of 50 or 60 Hz and the degree of protection IP23. If you have a machine with a voltage different from the mains, also tell us the data from its nameplate.

How do I request a Breve Tufvassons quotation?

Send the Breve Tufvassons code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Breve Tufvassons (manufacturer documentation)