Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Bourns supplier in Romania

For Bourns we quote SMBJ and SMCJ TVS diodes, MF-R resettable PTC fuses and TBU-CA high-speed protectors; for a quotation we need the full code, the working voltage of the circuit and the packaging you want.

Founded in 1947 · Headquarters: Riverside, USA

Request a quote

Who is Bourns and what does it make?

Bourns is an American manufacturer of electronic and circuit protection components, founded in 1947 and based in Riverside, California. For overvoltage and overcurrent protection we quote TVS diodes (transient voltage suppressors) in the SMBJ and SMCJ series, MF-R resettable PTC fuses and TBU-CA high-speed protectors. These are components mounted on electronic control boards, interface modules and power supplies, not panel devices.

The series differ in the power absorbed and in the way they act. SMBJ takes 600 W and SMCJ 1,500 W (at a 1 ms pulse), in SMB (DO-214AA) and SMC (DO-214AB) packages, with working voltages from 5 to 495 V and a response time under 1 ps on the unidirectional versions. The MF-R fuses have a hold current from 0.05 to 11 A and reset after the fault disappears. The TBU-CA protectors, built with MOSFET technology, limit the current during surges with a pulse of 250, 400, 500, 650 or 850 V and have ±2 kV ESD protection.

The applications are interfaces and signal inputs that must withstand electrostatic discharges, fast transients and surge pulses according to IEC 61000-4-2, -4-4 and -4-5: process control equipment, protection modules, test and measurement equipment. For an accurate quotation, the maximum voltage in the circuit, the peak power, the direction (unidirectional or bidirectional), the package and the packaging matter.

What do we supply from the Bourns range?

ProductDescription
SMBJ series TVS diodesDiodes for suppressing transient voltages, in an SMB (DO-214AA) package, with 600 W peak power at 1 ms, working voltages between 5 and 495 V and unidirectional or bidirectional versions. They are used to protect power and signal lines against discharges and pulses.
SMCJ series TVS diodesThe 1,500 W series in an SMC (DO-214AB) package, with the same working voltage range, 5–495 V, and the same code system: package, voltage, suffix A or CA, packaging. Suited to lines with higher pulse energy, where SMBJ is no longer sufficient.
MF-R resettable PTC fusesFuses with radial leads, insulated with flame-retardant epoxy polymer (UL 94V-0), from MF-R005 to MF-R1100. The hold current ranges from 0.05 A to 11 A; the models up to MF-R090 are rated 60 V, and MF-R1100 is 16 V at 100 A.
TBU-CA high-speed protectorsBidirectional low-capacitance components, in a DFN package, that limit the current during surges, from short circuits, contact with the AC mains, induction and lightning. The TBU-CA025 to TBU-CA085 versions withstand pulses of 250–850 V.

Why Bourns?

  • 600 W SMBJ and 1,500 W SMCJ — two power levels in SMB and SMC packages, with working voltages from 5 to 495 V
  • Unidirectional (suffix A) and bidirectional (suffix CA) versions with 5 % tolerance — the order code shows the working voltage and the direction
  • MF-R resettable PTC fuses from 0.05 A up to 11 A hold current — they are not replaced after each trip
  • TBU-CA protectors with MOSFET technology — pulse withstood from 250 to 850 V, with ±2 kV ESD according to IEC 61000-4-2
  • Approvals according to the manufacturer's documentation for the SMBJ, SMCJ and TBU-CA series and for MF-R — documentation for the board's certification file

Which Bourns codes and series are requested most often?

CodeDescription
SMBJ5.0A – SMBJ495AUnidirectional TVS diode 600 W, SMB package
SMBJ5.0CA – SMBJ495CABidirectional TVS diode 600 W, SMB package
SMCJ5.0A – SMCJ495AUnidirectional TVS diode 1,500 W, SMC package
SMCJ5.0CA – SMCJ495CABidirectional TVS diode 1,500 W, SMC package
MF-R005Resettable PTC fuse, hold current 0.05 A, 60 V
MF-R050Resettable PTC fuse, hold current 0.50 A, 60 V
MF-R110Resettable PTC fuse, hold current 1.10 A, 30 V
MF-R250Resettable PTC fuse, hold current 2.50 A, 30 V
MF-R900Resettable PTC fuse, hold current 9.00 A, 30 V
MF-R1100Resettable PTC fuse, 11 A, 16 V, 100 A
TBU-CA025High-speed protector, 250 V pulse, 100 V effective
TBU-CA050High-speed protector, 500 V pulse, 250 V effective
TBU-CA085High-speed protector, 850 V pulse, 425 V effective

Where is Bourns equipment used?

  • Process control equipment — protection of signal inputs and outputs
  • Test and measurement equipment — protection of interface circuits
  • Telecommunications — protection modules and VDSL and voice line cards
  • Industrial electronics — ESD, EFT and surge protection according to IEC 61000-4
  • Automation — interface modules and power supplies with overcurrent protection

How do we supply Bourns in Romania?

From the Bourns programme we can quote SMBJ and SMCJ TVS diodes, MF-R PTC fuses and TBU-CA protectors, by full code. For an accurate quotation, send the code from the component datasheet or from the board, the maximum working voltage of the circuit, the test standard (for example IEC 61000-4-5), the package and the quantity, with the packaging you want, for example a 7-inch or 13-inch reel. The codes are supplied to order; for standard components, 24–72 h when the item is in stock, locally or at the supplier. To order, usually 1–4 weeks; for special codes, depending on the specification, the lead time can be longer. The exact lead time is given in the quotation.

The match with an existing component code is established by comparing the parameters in the datasheet of the part to be replaced.

Frequently asked questions about Bourns

What does Bourns make for circuit protection?

Bourns makes TVS diodes for suppressing transient voltages (the SMBJ and SMCJ series), MF-R resettable PTC fuses and TBU-CA high-speed protectors, all for electronic boards and interface modules. They are components for ESD, EFT and surge protection.

How do I choose the working voltage for an SMBJ or SMCJ diode?

The code contains the working voltage: SMBJ5.0A is 5.0 V, SMBJ12A is 12 V. Choose a value not lower than the maximum voltage in the circuit; suffix A is unidirectional, CA bidirectional. Send us the working voltage and the type of line, and we propose the code.

Can you supply Bourns components in Romania, and how fast?

Yes, to order. Standard codes arrive in 24–72 h when the item is in stock, locally or at the supplier; to order, usually 1–4 weeks. For special codes or large quantities, depending on the specification, the lead time can be longer. We confirm the exact lead time in the quotation.

I need to replace an MF-R resettable fuse; what data do you need?

The full code from the fuse or from the board schematic, the hold current, the maximum voltage of the circuit, the shape of the leads and, if you can, a photo. MF-R005 to MF-R900 differ in current and voltage. With these data we check the suitable item.

What do I need to specify for a quotation on TBU-CA protectors or TVS diodes?

The working voltage of the circuit, the pulse level in the standard applied (for example IEC 61000-4-5), the power required, the package and the quantity. For diodes, the suffix -H in the code indicates the 7-inch reel, and its absence the 13-inch reel; tell us which packaging you want.

How do I request a Bourns quotation?

Send the Bourns code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: Bourns, Wikipedia (manufacturer documentation)