Skip to content
+40 371 232 404|Mon - Fri: 08:00 - 16:30 (Romania time)

Arancia Pumps supplier in Romania

For Arancia Pumps we quote CK, CKE, IDL and ORK vertical multistage pumps for coolants, CHL, CHLK, CHLF and CHLF(T) horizontal pumps and high-pressure screw pumps; the item is identified by series, number of stages and flange.

Headquarters: Azkoitia, Spain

Request a quote

Who is Arancia Pumps and what does it make?

ARANCIA PUMPS is a manufacturer of industrial pumps from Azkoitia, Gipuzkoa province, in Spain. The range includes vertical multistage centrifugal pumps, vertical in-line pumps, high-pressure screw pumps and low-pressure horizontal multistage pumps. The pumps serve machine tools, the automotive industry, industrial equipment and air conditioning.

The vertical pumps in the CK, CKE, IDL, ORK, TCP and T series are intended for coolants and lubricants in machine tools and for the transfer of other liquids. They are mounted on the tank, with the hydraulic part submerged and fixed on the flange. The pump is a multistage centrifugal type, with a standard EN motor, and the CKE series adds a frequency inverter integrated in the motor. The liquid pumped must be clean, free of abrasive particles, at a temperature between −15 and 70 °C, and optionally up to 120 °C. On the IDL, ORK, CK and CKE series, the mechanical seals are HUCV (carbon – tungsten carbide), HUUV (tungsten carbide on both faces) or HQQV (silicon carbide on both faces), with FKM elastomer.

The horizontal pumps CHL, CHLK, CHLF and CHLF(T) are centrifugal, multistage, non-self-priming, with a two-pole motor and working pressure of up to 10 bar. CHLF(T) is the version for coolants, oils and emulsions from machines. For a quotation, what matters is the liquid, the flow, the pumping head, the temperature, the immersion depth and the electrical supply.

The screw pumps in the high-pressure range work with light, clean liquids that contain at least 5% lubricant, at pressures of up to 150 bar and temperatures of up to 60 °C. They serve deep-hole drilling and chip removal, where the centrifugal pump no longer reaches the required pressure.

What do we supply from the Arancia Pumps range?

ProductDescription
CK, CKE, IDL, ORK, TCP, T vertical multistage pumpsMultistage centrifugal pumps for tank mounting, with the hydraulic part submerged. They are intended for coolants and lubricants in machine tools. The motor is self-ventilated with two poles, according to EN 60034, and the CKE series has an integrated frequency inverter. Class E for machine tools has speed control integrated in the motor.
Vertical in-line pumpsVertical multistage centrifugal pumps with inlet and outlet on the same horizontal plane, mountable directly on the pipe. The working temperature is up to 120 °C and the pressure up to 40 bar, for water and coolant.
CHL, CHLK, CHLF and CHLF(T) horizontal pumpsHorizontal centrifugal pumps, multistage, non-self-priming, with monobloc motor, IP55, insulation class F. CHL is for drinking water, CHLK for air conditioning, CHLF for industrial liquids in stainless steel, and CHLF(T) for cooling oils and emulsions. The working pressure reaches 10 bar.
High-pressure screw pumpsPumps for deep holes and chip removal at high pressure, with light, clean liquids containing at least 5% lubricant. The pressure reaches 150 bar and the temperature 60 °C.

Why Arancia Pumps?

  • Vertical multistage pumps for coolant: mounted on the machine tool tank, with the immersion depth chosen according to the tank
  • The CKE series with frequency inverter in the motor: pressure and flow adapt to the real demand of the machine
  • Class H5 for through-tool cooling: liquid sent at high pressure through the tool channels, for deep holes and chip removal
  • HUCV, HUUV and HQQV mechanical seals: the material pair is chosen by liquid and temperature
  • Screw pumps for high pressure, up to 150 bar: where the centrifugal pump does not reach the required pressure

Which Arancia Pumps codes and series are requested most often?

CodeDescription
CKVertical multistage pump for coolants, tank-mounted
CKECK version with frequency inverter integrated in the motor
IDLVertical multistage pump for coolants and lubricants
ORKVertical multistage pump for cooling and liquid transfer
TCPVertical pump from the machine tool pump family
CHLHorizontal multistage pump, for drinking water
CHLKHorizontal multistage pump, for air conditioning
CHLFHorizontal multistage pump in stainless steel, for industrial liquids
CHLF(T)Horizontal multistage pump for cooling oils and emulsions
HUCVMechanical seal carbon – tungsten carbide, with FKM
HQQVMechanical seal silicon carbide – silicon carbide, with FKM

Where is Arancia Pumps equipment used?

  • Machine tools: coolant pumps for machining centres and lathes
  • Automotive industry: machining and part cooling installations
  • Industrial equipment: liquid transfer in installations and process lines
  • Air conditioning: CHLK horizontal pumps for air conditioning and cooling circuits
  • Water treatment and fertilisation: CHL and CHLF pumps for water and solutions

How do we supply Arancia Pumps in Romania?

We can quote ARANCIA vertical, in-line, horizontal and high-pressure screw pumps, as well as mechanical seals for existing series. For a correct quotation, send the series and the number of stages from the nameplate, the liquid and the temperature, the flow and the head required, the immersion depth or the tank height, the flange type and the electrical supply. For pumps with inverter, we also need the control mode. The pumps are supplied to order, with a usual lead time of 1–4 weeks; depending on the series and specification the lead time can be longer. The precise lead time is confirmed in the quotation.

The exact series is determined from the nameplate of the existing pump or from the process data, before the quotation is prepared.

Frequently asked questions about Arancia Pumps

What pumps does ARANCIA PUMPS make?

ARANCIA PUMPS from Azkoitia, Spain, makes vertical multistage centrifugal pumps, in-line pumps, low-pressure horizontal multistage pumps and high-pressure screw pumps. They are used mostly in machine tools, industrial equipment and air conditioning.

How do I choose a coolant pump for a machine tool?

We start from the flow, the pressure, the liquid and the tank depth, on CK, CKE, IDL or ORK vertical pumps. For through-tool cooling, class H5 is used, and for speed control the CKE series or class E. Send the machine and tank data.

Do you supply ARANCIA pumps in Romania and how soon?

ARANCIA pumps are supplied to order, usually in 1–4 weeks. The requested pump or seal can ship in 24–72 h when the item is in stock, locally or at the supplier. Depending on the series, number of stages and specification, the lead time can be longer; the quotation contains the confirmed lead time.

Can I replace an old ARANCIA pump with a current model?

It can be done, after we check the series, the number of stages, the flange type and the motor. Send the pump nameplate, the immersion depth and a photo of the flange. With these data we can confirm which model fits.

What do I need to send for a quotation on an ARANCIA pump?

The series and the number of stages, the liquid pumped and the temperature, the flow, the pressure or the head, the supply (single-phase or three-phase) and, for vertical pumps, the immersion depth. For screw pumps, the lubricant content of the liquid also matters.

How do I request a Arancia Pumps quotation?

Send the Arancia Pumps code from the nameplate and the quantity; we reply in English with availability and the lead time written in the quotation.

Request a quote

Updated: 21 November 2026 · Sources: ARANCIA PUMPS (manufacturer documentation)